User's Manual

Lilee Systems™ TransAir™ PTC-3000 Family User Manual
Page 13
The table below lists the connectors and type on the interface panel of the TransAir PTC-3000.
Connector
Type
1U
4MCU/6MCU/2MCU
1pps In/Out
TNC
TNC
12 V DC Power
3-pin terminal block
M12 with A-coding
220 MHz Antenna 1
N-Type
N-Type
220 MHz Antenna 2
N-Type
N-Type
3G
TNC
TNC
GPS
TNC
TNC
LAN 1
RJ45
M12
LAN 2
RJ45
M12
RS-232 Console
RJ45
M12
RS-232/422/485 Serial 1
RJ45
M12
RS-232/422/485 Serial 2
RJ45
M12
SIM Card
SIM card slot
SIM card slot
USB
Type-A (female) USB
Type-A (female) USB
Wi-Fi Antenna 1
TNC
TNC
Wi-Fi Antenna 2
TNC
TNC
Table 3-1 – Interface Panel Connectors
The following section describes the connectors on the interface panel of the TransAir PTC-3000.
Refer to Figures 1 and 2 above for connector locations. Note: Wi-Fi not available in Canada
3.1 1pps In/Out
There is one 1pps in/out TNC connector on the PTC-3000 for syncing two PTC-3000 units
for lab testing.
Pin No.
Description
Center
Outer
GND
Table 3-2 – 1pps In/Out Connector Pinouts
3.2 12 V DC Power
There is one 3-pin terminal block connector on the PTC-3000-1U and one M12 with A-
coding connector on the PTC-3000-4MCU/6MCU for connecting to a 12 V DC power
adapter.
Pin No.
Description
1U (terminal block)
PTC-3201~4, PTC-3004, and PTC-3006 (M12)
1
GND
VDC
2
VDC
GND
3
GND
GND
4
N/A
VDC
Table 3-3 – 12 V DC Power Connector Pinouts