Installation Guide

8.2. Covering material for roof
Final roofing material should be installed immediately. If it is delayed, temporary protection tarping is
required. Only light material, for example bitumen shingles or lightweight steel are suitable roof coverings.
The load on the roof boards should not exceed 40 lbs per sq. ft.
Fascia and barge boards should be installed after the roof covering is fitted (drawing 12). If the cabin model
includes two sets of fascia boards, install the widest first followed by the narrower ones.
8.3. Roofing felt
If roofing felt is included, measure the length of the roof and cut the exact same length from the felt.
Fasten the first length carefully to the eaves (drawing 13). You can leave the edge of the felt about ½” over
the eaves, but do not bend the felt. Overlap the next felt strips and do the same on the other side of the