User's Guide
!
6. SSC Command Reference
7. SSC Command Reference
Here lists some common Wi-Fi commands for you to test the module.
7.1. op
Description
op commands are used to set and query the Wi-Fi mode of the system.
Example
op-Q
op-S-owmode
Parameter
7.2. sta
Description
sta commands are used to scan the STA network interface, connect or disconnect AP, and
query the connecting status of STA network interface.
Example
sta-S[-sssid][-bbssid][-nchannel][-h]
sta-Q
sta-C[-sssid][-ppassword]
sta-D
Parameter
Table 6-1. op Command Parameter
Parameter Description
-Q Query Wi-Fi mode.
-S Set Wi-Fi mode.
wmode
There are 3 Wi-Fi modes:
•
mode = 1: STA mode
• mode = 2: AP mode
•
mode = 3: STA+AP mode
Table 6-2. sta Command Parameter
Parameter Description
-S scan Scan Access Points.
Xinyuan
! /129
2021.12