Instructions / Assembly

Comfort-Tech Shaft Dampener
Simple Installation:
1. Slip the Comfort-Tech Shaft Dampener directly over the implement shaft (for optimum performance,
install the first dampener 2-6” from trimmer head and the second dampener close to the middle of the
shaft). Fits 1” to 1.25” shafts.
2. Use the enclosed zip-ties to firmly secure the Shaft Dampeners in place. Use one zip-tie per side.
Locate the raised ridges on each side of the Shaft Dampener and then Install one zip-tie (per side) in-
between ridges and then tighten in place. Check to make sure the Shaft Dampener is firmly installed and
not moving up or down the shaft. If moves, simply tighten the zip-tie(s) a few more notches with pair of
pliers.