Instructions / Assembly

Comfort-Tech Grip-Wrap

Installation Instructions: For best results, apply at room temperature. Begin with the end labeled “Start”

with beveled surface down against the grip, tighten wrap snugly in a counter- clockwise direction,

overlapping the bevel, being careful not to over-tighten. When finished, tuck the end under the last

wrap. Option: Use electrical tape to tape over last 1” on wrap. If the grip is not completely covered,

stretch the wrap more; if it is over- covered, stretch the wrap less.

PAGE 1
Comfort-Tech Grip-Wrap Installation Instructions: For best results, apply at room temperature. Begin with the end labeled “Start” with beveled surface down against the grip, tighten wrap snugly in a counter- clockwise direction, overlapping the bevel, being careful not to over-tighten. When finished, tuck the end under the last wrap. Option: Use electrical tape to tape over last 1” on wrap. If the grip is not completely covered, stretch the wrap more; if it is over- covered, stretch the wrap less.