SVN FUTURE 360 SPEAKER FUTURE360SP Operation Instructions
Preface Thanks for selecting the bluetooth speaker manufactured by our company. In order to let you easily experience the product, we equip the instructions for use with detailed contents. You can obtain the productrelated introduction, use method and other knowledge. Please carefully read the instructions before use. We apologize for the inconvenience in case of any error in printing or translation.
button, the scheme will be automatically matched, and the left and right sound channels will be distinguished to achieve stereo effect. [IP X6 waterproof] adopts IP X6 waterproof design, which can resist the water flow from nozzles in all directions and the music rhythm will not break. Operation to play music The speaker is in the default bluetooth mode at startup, insert TF card for automatic identification and play.
Introduction to the indicator lamp Power indicator: the power is displayed by four levels of LED. When charging, it flashes upward and lights up when full Bluetooth connection method 1. Start the machine by default into bluetooth mode, the machine emits prompt tone, the status indicator light slowly flashes 2. Turn on the bluetooth function of the mobile device (mobile, computer and so on), and search the bluetooth device. 3.
Remarks: the bluetooth will automatically search the device for pairing and connection within 10s after entering the bluetooth mode, and shall be manually connected after 10s. TWS Pair Methods 1. Turn on the two sound systems at the same time, and enter bluetooth mode. At this time, the status indicator light flashes slowly. 2. Long press the "pair" button of any stereo, and the machine emits a prompt sound and enters the TWS search state. At this time, the status indicator light flashes quickly. 3.
Method for charging Insert an end of the power cord into [Micro interface] of the machine, and insert USB at the other end into USB interface of the computer, or connect it with standard 5V 1000mA charging interface. The "red lamp" is on during charging, and the "red lamp" is off after charging.
A: the battery level is insufficient. Please timely charge, and it is suggested to use after charging for two hours. 3. Q: it cannot be charged? A: please use the charging cable with the machine, and confirm that the voltage of USB interface accessed is normal. 4. Q: the charging red lamp is not on or dark? A: normal. When the battery has been or is about to be fully charged, the charging red lamp will not be on or will be very dark.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.