User's Manual

Mass Open/Close system
Receiver
2016.09.22
4
GL-TE-017(V03)
Operation Instruction:
Before all operation, please connect transmitter box to AC power, plug the receiver box MC250 to
L1 actuator.
Pairing
1. Transmitter box:
 Turn the key left, turn right, and turn left again in 3 seconds, the pairing LED will light on, the
transmitter is pairing mode.
 Turn the key any direction will exit paring mode
2. Receiver box
press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will drive
out and in for twice in 4 seconds, then the paring is finished.
Mass Open/Close Operation:
 Turn wall unit key to position Open to let all seats open
 Turn wall unit key to position Close to let all seats close
 Release the key to position I to standby.
Single unit Operation:
 Press handset button S1 to let seat open
 Press handset button S2 to let seat open
Remark:
1. When connected to power supply please connect with handset and don’t press any buttons, the receiver
box will recognize the handset logic automatic.
2. If press the buttons 2.5 times within 1 seconds, the operation will be disabled for 5 s to prevent user
playing with the system.