User's Manual

17
Tolerance of the parallels:
2) To maintain the correct angle of
rotation of the head rest and the
foot rest it is important that the twist
bracket is welded according to the
below instructions. Non compliance
with the instructions could lead to a
smaller angle of rotation or in
a worst case damage to TD3.
o
f
t
h
e
h
e twist
o
t
he
iance
d
to
a
Welding the twist bracket on the frame
1) For the TD3 it is important that it is not
welded on the outside of the twist
bracket because there is not room for
a welding seam in the motor housing.
Instead weld the bracket on the
whole length of its ends.
e
frame
not
or
g
.