User's Manual

7
Misc. on the TD3 TWINDRIVE
®
system
This system is a TWINDRIVE system developed for leisure beds and for indoor
use in private homes.
Warranty
There is 36 months’ warranty on the TWINDRIVE
®
products TD3 and HB20
against manufacturing faults calculated from the production date of the
individual products (see label). LINAK A/S’ warranty is only valid in so far as
the equipment has been used and maintained correctly and has not been
tampered with. Furthermore, the system must not be exposed to violent
treatment. In the event of this, the warranty will be ineffective/invalid. For
further details, please see LINAK A/S’ ordinary conditions of sale.
Maintenance
Clean dust and dirt on the outside of the system, at appropriate intervals and
inspect them for damage and breaks.
Inspect the connections, cables and plugs and check for correct functioning as
well as fi xing points.
Check emergency lowering batteries yearly for their full capacity.
If not, they have to be changed. Type 9V 6F22 or 6LR61.
The cleaners and disinfectants must not be highly alkaline or acidic
(pH value 6-8).
It is not allowed to use solvents for cleaning up.
Max. load running head and foot end motors at the same time in
upward direction is 350 Nm on Head motor, and 200 Nm on Foot end
motor.
If massage motors are running at the same time, the load limit is
reduced.
Description of the TWINDRIVE
®
TD3 system
Each TWINDRIVE
®
TD3 unit consists of 2 internal motors and a built-in control,
which makes it a very compact unit. The mains cable is exchangeable. Only
the handset must be paired.
Application of the TWINDRIVE
®
TD3 system:
Irrespective of the load the Duty cycle: 10% ~ 3 min./ hour or max. 2 min. at
continous use followed by 18 min. not in use.
Do not turn on the system if it is not mounted in a bed.