Product Info

Page 256 of 264
If COL50 is mounted incorrectly, water will gather in the plug holes resulting in possible non-compliance with IPX6.
COL50 can be mounted as shown on the pictures below:
1) Batteries up, cable outlets downwards
2) COL50 lying on the side, no difference if mains cable is up or down
Recommendations - mounting
COL50 – Mounting on patient lifter
1
4
2
Mount the steel bracket
on the patient lift using
the two dedicated holes
Mount control box (COL50)
on steel bracket. Move lower
position in first
Mounting holes
With flat head screw
driver - "Push, turn and
release" the lock
3
Move top
position in
Cable hanger:
COL50 comes with a cable hanger for parking mains cable or hand control when
not in use.
The cable hanger can be located on either the left or right side of the control box.
Place hanger in designated grooves on the back before mounting the control box
on the steel bracket on the patient lift.
When mounted, the hanger is locked in place.