User's Manual

Page 16 of 28
Driving to memory positions
After storing the memory positions, the positions can be reached simply by tilting the DPG1M. Tilt and hold
- when a stored position is reached, the desk stops. This way the user can easily change between sitting and
standing position without looking at the DPG1M in the meantime. The DPG1M will stop at all stored memory
positions. When the desk stops at a memory position, the user can continue to tilt the DPG1M for 1 second
and the desk will move past the memory position and continue in the direction of the tilt. Furthermore, when
the desk stops at a memory position, the user can release the DPG and tilt again immediately to move past a
memory position.
Driving to memory positions (Automatic drive enabled, only possible for “Full version”)
After storing the memory positions, the positions can be reached simply by tilting the DPG1M. Double tab on the
DPG1M to let the desk adjust automatically to the first position in the direction of the double tap. Simply tab the
DPG again to stop the driving of the desk.
Figure 3: Double tap to adjust the desk to a memory position automatically