User's Manual

Page 37 of 28
Pairing Bluetooth
®
To get a functional app, you must have the LINAK Bluetooth
®
Adapter or
desk panel with integrated Bluetooth
®
such as DPG1M, DPG1B or DPG1C.
The screen to the left informs the user how to get the product they received
in pairing mode.
The Bluetooth
®
Adapter must be plugged into the DESKLINE
®
control box
and it will blink blue and be in pairing mode for 3 minutes.
To set a DPG1M/B/C in pairing mode, the Bluetooth
®
button in the front of
the desk panel must be pressed for 2 seconds and the light strip or light LED
will blink blue to indicate that it is in pairing mode.
When pressing “Hide pairing guide” the screen with the list of devices in
pairing mode will appear. Press the “connect” button to the right of the
device to pair.
All Bluetooth
®
Adapters Bluetooth
®
IDs are named BLE2LIN followed by a
4-digit number.
All DPG desk panel Bluetooth
®
IDs are named DESK followed by a 4 digit-
number.
Demo: By selecting “Try the demo”, you will get access to explore the
functionality of the Desk Control App but without connection to a product.
After pressing the “connect” button and the connection has been
established successfully, the user will be lead to the “Control” page of the
app.
The following question pops up on the screen, which the user have to
answer.
If the user only uses one desk with this app; Press yes
If the user uses this app for multiple desk; Press no