Product Drawings

Page 152 of 194
The Foot Switch is a modular system, developed for use together with some of LINAK control boxes.
The LINAK Foot Switch is designed for control of physiotherapeutic beds, hospital beds, dentist chairs,
gynaecologist chairs, computer workstations, and working desks etc. It can also be used as a “stand alone”
item for industrial applications.
Footswitch
Consist of: FS (a pedal unit) and FSE (electronics unit), which can activate one or more actuators. The module
system can max. consist of two pedal units, a FSR (right pedal), a FSL (left pedal), and one electronics box.
10. FS (MEDLINE
®
CARELINE
®
TECHLINE
®
)
Bed adaptor
Floor adaptor
The Foot Switch FS3 is an ergonomically designed modular system, developed for use together with LINAK
control boxes and IC actuators with Intelligent Control. The LINAK
®
Foot Switch is designed for easy and
improved control of e.g. hospital beds and couches and has been developed in cooperation with end users.
The Foot Switch is therefore very user- and cleaning-friendly and has an aesthetic design.
The FS3 is a robust foot control which is available both as a single and double version as well as a floor and
bed model. When mounting the double version on a bed, the Foot Switch will be placed on each side of the
bed frame to enable easy operation from both sides. It is also possible to have the double floor version for
medical applications, e.g. couches, in order to achieve the opportunity to control different motions of the
application. The FS3 is furthermore available in an analogue version and a digital OpenBus™ version.
Mounting of the FS3 bed model:
To mount the FS3 bed model, you have to use the bolt and the nut which have already been fitted to the FS3 bed model (see picture below).
Bolt and nut for mounting
7 mm
Bolt M5 x 25
Nut M5
11. FS3 (MEDLINE
®
CARELINE
®
)
You have to remove the nut before mounting the FS3 on the bed and after mounting the FS3 to the bed, the nut is fastened to secure that the FS3 is
fixed to the bed frame.
Please note that the max. torque on the nut should be 2.0 Nm (20 kg f. cm).
When mounting the FS3 bed model, it is important to run the cable through the hole of the FS3 in order to lead the cable through
(see picture below).
Location of the notch for the cable of the FS3 bed model.
Recommendations
• Do not pull the cable or drop the FS3 on the floor.
• Do not play with the FS3.
Usage:
• Usage temperature: + 5 ºC to + 40 ºC
• Storage temperature: -10 ºC to + 50 ºC
• Relative humidity: 20% to 80% - non-condensing
• Atmospheric pressure: 700 to 1060 hPa (3000 m)
• Height above sea level: Max. 3000 meters
• Compatibility: Compatible with LINAK analogue and
OpenBus
TM
control boxes.
Please contact LINAK.
• Approvals: IEC60601-1
ANSI / AAMI ES60601-1
CAN / CSA-22.2 No 60601-1