Product Drawings

Page 159 of 194
Press key 1 to connect the hand
control to the control box
Adjust your application with a
LINAK wireless control
When the hand control LED is blinking fast and the control box gives a high frequency sound in the same speed,
the devices are ready for pairing. To finalise the pairing, press Key 1 on the hand control.
Connecting to the control box
23
01
45
67
89
1
Recommendations
• Do not submerge the hand control in water.
• Unless otherwise specified or agreed with LINAK, the hand control is only intended to be used for LINAK systems.
• It is recommended to check the hand control for damage and holes caused by violent handling before washing the
application or at least once a year.
• Always perform the pairing of hand control and control box in close proximity to the application.
Also ensure that the pairing has been made with the correct application by operating the application after ended pairing.
• When intending to operate an application with LINAK BLE, please ensure that the correct BLE hand control is used.
Otherwise, there is a risk of unintended movement of the application that has been paired with the BLE hand control.
• When changing the battery, the battery cover must be lubricated with technical white Vaseline for easy mounting and
to avoid fluids from entering the hand control.
Warnings
Wireless risks and recommendations
Due to some customer concerns regarding the range of BLE, LINAK decided to set the RF sensitivity and the transmit power settings to a maximum.
In addition to that, LINAK Standard BLE allows pairing all the time.
Risk 1
If a BLE hand control is to be paired with an application, this can be done without coming closer to the application, as the above-mentioned
settings are at a maximum. In such a scenario, there is a risk of pairing with another application from a longer distance as opposed to the distance
of the application you want to pair with. The rule is that a BLE hand control is paired with the closest BLE device that it detects, however, the BLE
device is not always physically closest.
Recommendation for Risk 1
The pairing process must always be made in near proximity to the application. It must also be ensured that the pairing is done with the correct
application by simply operating the application after the pairing process.
Risk 2
In case that there are more LINAK BLE applications in a building and the BLE hand controls are accidentally swapped, there is a risk of operating
another BLE application if within range. This can cause unintended movement and can have severe consequences for the patients’ health.
Recommendation for Risk 2
When intending to operate an application with LINAK BLE, it must be ensured that the correct BLE hand control is used. Otherwise, there is a risk
of unintended movement of the application that has been paired with the BLE hand control.