Users Manual

Page 101 of 194

Potentiometer

Potentiometer cables:

Columns with Potentiometer feedback option require speciﬁc actuator cables, both for termination through top-plate (option Txxx)

and through side-entry (option Sxxx).

Table 1, connection to the motor and to the potentiometer and their colour.

Drawing no. 0965213

Connection through top-plate:

Columns with cable termination through top-plate (combination Txxx), require a special external cable, with part number 0965213.

The cable is 1,5 m long, with open-end termination. The colours are described in the table above.

E1 (power switch) F6 (potentiometer) Colour

1 Potentiometer 0V Black

2 Not connected -

3 M+ (motor/power) Blue

4 Potentiometer output Orange

5 Potentiometer VCC Red

6 M- (motor/power) Brown

Connection through side-entry:

Cable termination is open-end. Please see the ﬁgure below.

Please see table 1 for the connection to the motor and to the potentiometer and their colour.