Users Manual

Page 113 of 194
The CB6P2 platform is introduced to obtain a powerful and optimised solution to customers looking
for existing analogue input systems. It is based on OpenBus™ technology, but to meet existing
analogue systems it has an analogue input similar to HB40 and therefore OpenBus™ accessories
cannot be connected.
Combination Overview
CB6P2 is meant for use with:
LA27 std. motor with Hall (cable type ‘A’)
LA27 std. motor (cable type ‘B’),
LA31 std. / fast motor with / without Hall,
LA34 std. / small / fast motor with / without Hall (fast motor not max. load),
LA40 std. motor with / without Hall
LA44 std. / fast motor with / without Hall (fast motor not max. load),
BL1 (only with 270W transformer type) with / without Hall, HB7x, HL7x, HB8x, ACL/ACM/ACP
(HB40-like)
Recommendations
Battery Operation:
• If the battery voltage is at ‘low level’, a battery alarm beeps constantly when the HB/ACx is activated.
(Low level means that battery charging is necessary to maintain the best possible life time.
Low level battery limit corresponds to approx. 19 V (+/- 5 %).
• If the battery voltage is at ‘critical level’ the battery alarm function shuts down all operation immediately.
Critical level limit corresponds to approx. 17.5 V (+/- 5 %).
• If battery back-up is applied it only commences battery charging when it is connected to the mains.
• A battery stored at 25 °C has to be recharged every 6 - 7 months.
• Prior to first use of LINAK batteries, please make sure that they are charged for 24 hours in order to reach proper function and prolong the lifetime
of the batteries.
• The longest lifetime is obtained when the battery is fully charged.
4. CB6P2 (MEDLINE
®
CARELINE
®
)
Compared to other LINAK control boxes the CB7 is very small and compact in design.
The CB7 is designed to slide onto an LA31 actuator for easy fitting e.g. in a recliner application
where “mounting” space is limited.
The control box function is divided in two parts. The actual control box CB7, which slides onto the
LA31 actuator and a separate external power supply transformer box TR6 or TR7, which can be wall
mounted or placed on the floor moulding next to the mains.
The control box is only fitted with low voltage electronic components and the connection between
the CB7 and transformer is via a 24 V power cable.
5. CB7 (HOMELINE
®
)