User's Manual

Page 21 of 44
Child lock function - only for HB20RF
Enable the child lock function:
To enable the child lock function the following procedure must be performed:
1. Dismount the battery lid
2. Remove 1 battery and wait for 15 seconds
3. Press both buttons on row 2 and mount the battery at the same time
4. The child lock function is now enabled
5. Mount the battery lid
See pictures below:
N.B: The child lock function only locks the actuator functions. Therefore, it is disabled when the handset is in
massage command mode.
Unlock the child lock function:
Press up and down keys of the 2
nd
row (footrest up/down on a HB2X) at the same time for one second. When
the LED turns on, the handset is unlocked.
NB: The handset is still locked if the keys are not released again before the LED turns off.
Automatic lock
The handset is automatically locked 10 seconds after last key press.
Signal that the handset is locked
If the handset is locked and the user tries to operate it, it will give a short flash with the LED to indicate “key
is pressed, but handset is locked”
Disable the child lock function
If you wish to disable the child lock function, just dismount a battery and wait 15 seconds before you mount
it again. The child lock function is now disabled.