User's Manual

Page 25 of 44
HB22RF2000 in general:
• Massage will turn off automatically 10 minutes after the last adjustment of the settings. Default at the TD1
and the TD3. The TD3 can be configured.
• Adjusting the bed will turn off the massage, but massage will automatically start up again afterwards.
• When turning on a single massage motor it will start up with the same intensity as it was last time it was
running as a single motor.
• When turning on a massage program it will start up with the same settings (program, motor change
speed, intensity, wave/pulse, frequency) as it was last time.
• When in massage mode, turning on a massage function can also be done by keeping the up button
pressed. Then it will turn on, and after a short delay adjust the intensity up.
• In case of any error: current limitation, high temperature or short circuit, the massage system will stop both
motors, even if only one motor is affected.