User's Manual

Page 30 of 44

Accessories:

The TD3 can handle different kinds of accessories. The main types are:

1. LED Lightbox: A light unit

2. DC Connector: Connection possibilities of units with DC plugs

3. USB Connector: Connection possibilities with units with USB plugs

4. Bluetooth2LIN with this box connected you can use your iPad, iPhone or iPadtouch as a handset

Cable for connection to the TD3 is a separate unit: 0617101, 205 mm long

1. LED Lightbox

Just connect the LED Lightbox to the TD3 system via the motor cable. The light can be turned on and off via

the handset.

2. DC Connector

Connect the DC Connector to the TD3 system via the motor cable. Before use the system must be conﬁgured

via the TD3 conﬁgurator to be able to handle the mounted DC unit. The TD3 conﬁguratior is a PC software

program. Connect your DC unit with the DC Connector e.g. a LED light rail and the light can be turned on

and off via the handset. As standard the TD3 can handle DC units using 12V. Units using other levels must be

conﬁgured.

See system example

3. USB Connector

Connect the USB Connector to the TD3 system via the motor cable. Before use the system must be

conﬁgured via the TD3 conﬁgurator to be able to handle the mounted USB unit. The TD3 conﬁgurator is a

PC software program.

Via this unit you can connect a range of different accessories and gadgets with a USB plug, just as long as

the device works in accordance with the general USB charger standard (max. 5V and supply max. 0.5A).

Example of a USB unit could be an energy saving busbar to which a standard lamp can be connected. The

lamp can then be turned on and off via the handset, see example below.

Connection to TD3

Mobile phone

Connection to TD3

LED light rail

LED lamp

4. See the separate instruction for connection and use

(http://catalog.linak.com/Linak/ENGLISH/USERMANUAL/HOMELINEBluetoothBedUserManualEng/)