User's Manual

Page 23 of 40

Massage

Controlling massage

The HC40 FRAME™ Advanced can control up to two massage references. The two standard options are

called “MASSAGE BACK” and “MASSAGE LEG”.

Loop in the menu to ﬁnd the massage screens. From the massage screen it is possible to:

• Set a timer

• Change massage mode

• Turn on/off the massage

• Adjust intensity

Setting a timer

1. Press button 1 “TIMER” to set a timer for the duration of the massage session.

2. Use ‘up’ and ‘down’ buttons to adjust the minutes.

3. Press button 3 “SAVE” to save the duration and start the massage.

Note: If the timer in the HC40 is set to a higher number than what is conﬁgured in the actuator system as timer, the massage

will stop according to the conﬁguration in the actuator system.