User's Manual

Page 25 of 44
© 2020 LINAK A/S
LA36 - Ordering example
36 120 000 A 9 23 B A - 6 1 6 G 3 0300 A C S 0 0 0
Type: 36 = LA36
Spindle type: 080 = 8 mm
120 = 12 mm
160 = 16 mm
200 = 20 mm
Stroke length: 200 = mm (example)
AXX = 10xx mm
BXX = 11xx mm (In steps of 5 mm at strokes > 999 mm)
C 00 = 1200 mm
Safety nut: 0 = None
A = Safety nut
Feedback: 0 = None
A = Analogue feedback output (single ended)
9 = Analogue feedback output (differential)
F = PWM
H = Dual Hall
K = Single Hall (XOR)
L = Potential free end stop signals
P = Potentiometer (Only with the platform: Standard)
Z = Hall and potentiometer
X = Special
Platform: 00 = Standard (without limit switches) 01 = Standard (with limit switches)
LINAK interfaces: 13 = IC Basic 23 = IC Advanced
33 = IC Parallel
A3 = I/O Basic C3 = I/O Customized
F3 = I/O Full
Industrial/mobile interfaces: 04 = Modbus 06 = LIN bus (switch)
16 = LIN bus (zero point) 07 = CAN SAE J1939 (switch)
17 = CAN SAE J1939 (zero point) 08 = CANopen (switch )
18 = CANopen (zero point) XX = Special
Motor: A = 12 VDC Normal 1 = 12 VDC With dummy clutch
B = 24 VDC Normal 2 = 24 VDC With dummy clutch
C = 36 VDC Normal 3 = 36 VDC With dummy clutch
J = 48 VDC Normal 4 = 48 VDC With dummy clutch
X = Special
Housing: A = Standard housing 6 = Reinforced housing
IP66 dynamic 6 = IECEx / ATEX approved housing 9 = Harsh environment housing*
IP69K static
Reed: - = Without magnet
+ = With magnet (for an externally mounted reed limit switch)
Colour: 6 = Dark olivish grey NCS S7000-N*
X = Special
Back fixture: 1 = 0 degrees 3 = Ball eye
2 = 90 degrees 4 = Outer thread
5 = Inner thread 6 = Rotated (30° Interval)
A = 30 degrees B = 60 degrees
C = 120 degrees D = 150 degrees
X = Special
Piston rod eye: 1 = With slot 2 = Solid
4 = Outer thread 5 = Inner thread
6 = Ball eye X = Special
* The harsh environment housing is black