- Lincolnelectric Wire Feeder Specification Sheet

www.lincolnelectric.com
Recommended General Options
Wire Feeder
REGULATORS AND WATER
CONNECTION KITS
Deluxe Adjustable Gas
Regulator & Hose Kit
Accommodates CO
2
, argon, or
argon-blend gas cylinders.
Includes a cylinder pressure
gauge, dual scale flow gauge
and 4.3 ft. (1.3m) gas hose.
Order K586-1
Harris
®
Argon Flowmeter
Regulator
Deluxe flowmeter/regulator.
Includes 10 ft. (3.0 m) hose.
Order 3100211
Water Connection Kit
Includes quick connect fit-
tings on front and back of
wire drive for use with water-
cooled guns and Magnum
Coolers. Kit provides for one
gun.
Order K590-6 for LN
™
-10,
DH-10, Power Feed
™
10M,
Power Feed
™
10M Dual,
Power Feed
™
25M
DUAL PROCEDURE KITS
AND REMOTE PENDANTS
Dual Procedure/Memory
Panel
User memories work by copy-
ing the weld procedure from
one of the six memories into
either the A or B procedure.
Weld procedures are saved
into the memories only when
the operator chooses.
Order K2360-1 for
Power Feed
®
10M
Dual Procedure Switch
Allows the use of two weld-
ing procedures with one
Lincoln Magnum
®
gun. 15 ft.
(4.5m).
Order K683-3 for LN™-10,
DH-10, STT
®
-10, Power Feed
®
10M
STT
®
Remote Output
Control
Remotely controls peak and
background current. 10 pin
remote control with 25 ft.
(7.6m) of cable.
Order K942-1 for STT
®
-II
Foot Amptrol
®
Connector
Kit
Provides 25 ft. (7.6m) of
remote output control for TIG
welding. (6 pin plug connec-
tion).
Order K2320-1 for
Power Feed
®
10M
Dual Procedure Switch Kit
Easily mounts to gun using
convenient velcro straps to
allow welding operators to
select between two preset
welding procedures or modes.
Plugs into the gun trigger
connector on the wire feeder.
Order K2449-1 for
Power MIG
®
350 MP
GMA TIMER KITS, GAS
SOLENOID AND BURN-
BACK KITS
LF-72 and LF-74:
Postflow and Burnback
Timer Kit
Provides adjustable delay of
power source output shut off
to prevent electrode sticking
in crater when using high
wire feed speeds.
Order K2330-1 for LF-72,
LF-74
Remote Voltage Control Kit
Allows arc voltage to be
changed at the feeder.
Order K2329-1 for LF-72,
LF-74
LN
™
-7, LN
™
-8, LN
™
-9, and
LN
™
-25 PRO:
GMA Timer Kit
Provides delays for preflow
and postflow gas, adjustable
burnback, and a purge/cold
inch switch.
Order K418 for LN
™
-7 GMA,
LN
™
-9 GMA, LN
™
-9F GMA
Gas Solenoid Assembly
Includes solenoid valve and
mounting bracket.
Order K494 for LN
™
-7
Gas Solenoid Kit
Includes solenoid valve and
mounting bracket.
Order K425 for LN
™
-8, LN
™
-9
Burnback Kit
Provides adjustable delay of
power source output shut off
to prevent electrode sticking
in crater when using high
wire feed speeds. Includes a
cold inch switch.
Order K419 for LN
™
-7, LN
™
-7
GMA, LN
™
-9 GMA
Order K202 for LN
™
-8, LN
™
-9
Preflow, Postflow and
Burnback Timer Kit
Provides adjustable delay of
power source output shut off
to prevent electrode sticking
in crater when using high
wire feed speeds.
Order K2330-2 for
LN
™
-25 PRO
159