- Lincolnelectric Wire Feeder Specification Sheet
MIG: Industrial Welders
www.lincolnelectric.com/mig-welders
CV-655
Energy efficiency, reliability and exceptional performance are what set the CV-655 apart from
the rest. Designed primarily for heavy-duty applications, the CV-655 is an outstanding choice
for MIG and flux-cored welding on mild steel, stainless steel, aluminum and alloys.
• Calibrated output control lets operator accurately
regulate power levels.
• Line voltage compensation maintains weld consistency,
even with line voltage changes of ±10%.
• 115-volt duplex receptacle provides 20 amps of auxiliary
power.
• Separate output studs allow the operator to select high
or low inductance.
• Panel switches allow operator to change settings at
the power source or wire feeder.
• Solid state circuitry provides extra long life during
repetitive applications.
• Three-year warranty on parts and labor.
• Seven-year warranty on power rectifier.
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range inches (mm) lbs.(kg)
CV-655 K1480-1 230/460/3/60 650A/44V/100% 94/47A 70-815A 27.5 x 22.2 x 38.0 652
K1480-5 575/3/60 815A/44V/60% 38A 13-44V (699 x 565 x 965) (296)
K1481-1 230/400/3/50/60 94/54A Max. OCV: 48V
K1481-5 415/3/50/60 52A
DC
3
PHASE
60
Hz
50
Hz
CV
Processes
• MIG
• Flux-Cored
• Submerged Arc
• Gouging
Output Input
Key Options
• K1482-1 Digital Meter Kit
• K1486-1 Air Filter Kit
• K1528-1 Dual Process Switch
• K857 Remote Output Control
•
More options at end of section
Literature
E4.40
Invertec
®
STT
®
II
The revolutionary STT
®
II power source combines high frequency inverter
technology with advanced Waveform Control Technology
®
to provide a
better welding solution than traditional short arc MIG.
Featuring Surface Tension Transfer
®
Process
• Controlled penetration and outstanding heat input control—Ideal
for welding joints with open root, gaps, or on thin material with
no burnthrough.
• Reduced spatter and fumes—Current is controlled to achieve
optimal metal transfer.
• Various shielding gases—STT
®
may be used with various gas
blends of Argon including Helium or 100% CO
2
with larger
diameter wires.
• Good bead control and faster travel speeds—Can replace TIG
(GTAW) in many applications without sacrificing appearance.
• Background and Tailout Current—accurately control fine and
coarse heat input for reduced distortion and burnthrough as
well as proper penetration.
• Adjustable Hot Start controls the heat at the start of the weld.
• Three-year warranty on parts and labor.
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range inches (mm) lbs.(kg)
Invertec
®
STT
®
II K1525-1 208/230/460/3/60 225A/29V/60% 32/30/16A Peak Current: 0-450A 23.2 x 13.2 x 24.4 117
K1526-1
200-208/220-230/380-415/440-460/3/50/60 200A/28V/100% 33/30/15/17/16A Background Current: (589 x 336 x 620) (53)
K1526-2 200/208/380/400/415/3/50/60 36/34/20/19/18A 0-125A
Invertec
®
STT
®
II CE K1527-1 200/220/380/415/440/3/50/60 33/30/18/17/16A Max. OCV: 85V
K1527-2 200/208/380/400/415/3/50/60 36/34/20/19/18A
Processes
• MIG-STT
®
Output Input
Unit Includes
• Twist-Mate
™
Cable Plugs (qty.2)
•STT
®
II Sense Lead Kit,
25 ft. (7.6 m)
Key Options
• K1560-2 STT
®
10 Wire Feeder
• K1759-70 Twist-Mate
™
Female
Plug
• K2593-100 Coaxial Power
#1 Cable, 100 ft.
• K1758-L Input Cable Assembly
• K852-xx Twist-Mate
™
Welding
Cable Connectors
•
More options at end of section
Literature
E4.52
DC
3
PHASE
50
Hz
60
Hz
STT
27