- Lincolnelectric Wire Feeder Specification Sheet

LN
™
-25 PRO
Built upon the tradition and success of the LN
™
-25, the new LN
™
-25 PRO is designed
to be simple, reliable and easy to service. The LN
™
-25 PRO is ideal for field
construction and fabrication, shipyards, and rental companies.
Portable Industrial Wire Feeder
Processes
• MIG
• Pulsed
• Flux-Cored
Output Input
LN
™
-25 PRO Includes
• Internal Contactor
• Gas Solenoid
• Flowmeter
• Arc Sensing Lead & Clip,
15 ft. (4.5m)
• 2 Gun Bushings (K1500-2
installed; K1500-1 loose)
Required Options
• Drive Roll and Guide Kit
Key Options
• More options at end of section
Power Sources
All electric or engine drive welders
with CV capability.
Literature
E8.105
Product Product Input Output Capacity Gas Solenoid & Wire Feed Speed Range Wire Size Range - in. (mm) H x W x D Net Weight
Name Number Power Current/Duty Cycle Flow Meter ipm (m/min) Solid Cored Aluminum in. (mm) lbs.(kg)
LN
™
-25 PRO K2613-1 15-110V DC 325A/100% YES 50-700 (1.3-17.7) .023-1/16 .030-5/64 .035-1/16 15 x 8 x 22 37 (16)
Standard 450A/60% (0.6-1.6) (0.8-2.0) (0.9-1.6) (381 x 203 x 558)
LN
™
-25 PRO K2613-2 30-400 (0.8-10.1) .030-3/32
Extra Torque (0.8-2.4)
15 -110
VDC
• 2-Step/trigger interlock provides comfort for long welds.
• Analog Voltmeter with polarity indicator LED automatically
adjusts to welding polarity.
• Non-linear wire feed speed gives single range control, yet
maintains sensitivity with low wire feed speed.
• Sturdier and rugged spindle design with an incorporated
brake.
• Lightweight, impact and flame resistant polycarbonate
case design keeps the internal components protected.
• Potted and trayed PC board protects against
moisture and corrosion.
• Reel locking mechanism eliminates spindle cross
threading.
• Case can be replaced in less than 5 minutes –
eliminates downtime.
• Timer Kit available – includes preflow, postflow and burnback.
Semiautomatic Wire Feeders
www.lincolnelectric.com/wire-feeders
LN
™
-23P
Semiautomatic Wire Feeder
Processes
• Innershield
Output
Unit Includes
• 25 ft. (7.6m) Control Cable
• 25 ft. (7.6m) 1/0 Electrode Cable
• 3/32" Drive Rolls and Guide Tubes
Required Options
• Adapter Kit
• FCAW-SS 90° Nozzle
• More options at end of section
Literature
E8.90
Product Product Input Output Capacity Wire Feed Speed Range Wire Size Range H x W x D Net Weight
Name Number Power Current/Duty Cycle ipm (m/min) in. (mm) in. (mm) lbs.(kg)
LN
™
-23P K316L-1 14-50V DC 350A/60% 30-170 .068-5/64 20.5 x 9 x 19 27
K316L-2
(1)
(90V DC Max. OCV) (0.76-4.3) (1.7-2.0) (520 x 230 x 480) (12.3)
• Weighs less than 50 lbs. (22.7 kg) including optional Magnum
®
Innershield
®
gun and 14 lb (6.3 kg) coil of electrode.
• Continuous wire feed speed control, voltage control and
analog voltmeter are standard.
• Completely enclosed wire reel keeps the wire free of
contaminants.
• Equipped with trigger interlock circuit to reduce operator
fatigue.
• Gun-mounted two-position switch allows on-the-fly change
to 83% of the preset wire feed speed.
• Electrode and control cable quickly connect to power source.
• One or two LN
™
-23P wire feeders can be directly connected
to recommended Lincoln
®
power sources, but only one can
be used at a time.
• Three-year warranty on parts and labor.
The LN
™
-23P semiautomatic wire feeder is able to handle the
toughest work sites and is an excellent choice for field erection
and pipe welding applications. It is portable, easy to set-up, and
ideal for reaching difficult locations.
70
(1)
See Engine Drive Section for compatible equipment.
LN™-23P shown with options