Specification

WELDING CONSUMABLES CATALOG ı 17
STICK (SMAW) ELECTRODE
Fleetweld
®
180
Welding Positions
Typical Applications
All
 Small AC welders
 Sheet metal
 Edge, corner and butt joints
 Welding on galvanized and specially coated steels
 AC polarity welding
 Performs on low amperages and OCV
 Easy to strike arc
Conformances
AWS E6011 • Mild Steel, Cellulosic
Key Features
AWS A5.1/A5.1M: 2004
ASME SFA-A5.1:
CWB/CSA W48-06:
E6011
E6011
E4311
DIAMETERS / PACKAGING
Diameter Length 1 lb (0.5 kg) Plastic Tube
6 lb (2.7 kg) Master Carton
5 lb (2.3 kg) Plastic Tube
20 lb (9.1 kg) Master Carton
50 lb (22.7 kg)
Easy Open Can
in
(mm)
in (mm)
3/32
1/8
5/32
(2.4)
(3.2)
(4.0)
12 (300)
14 (350)
14 (350)
ED031152
ED031722
ED032448
ED032449
ED010110
ED010105
ED010114
MECHANICAL PROPERTIES
(1)
– As Required per AWS A5.1/A5.1M: 2004
Yield Strength
(2)
Tensile Strength Elongation
Charpy V-Notch
J (ft•lbf)
MPa (ksi) MPa (ksi) % @-29°C (-20°F)
Requirements - AWS E6011 330 (48) min. 430 (60) min. 22 min. 27 (20) min.
Typical Results
(3)
- As-Welded 460-490 (67-71) 570-590 (83-86) 22-32 35-72 (26-53)
DEPOSIT COMPOSITION
(1)
– As Required per AWS A5.1/A5.1M: 2004
%C %Mn %Si %P %S
Requirements - AWS E6011 0.20 max. 1.20 max. 1.00 max. Not Specified Not Specified
Typical Results
(3)
- As-Welded 0.13-0.20 0.44-0.71 0.23-0.45 0.009-0.014 0.005-0.008
%Ni %Cr %Mo %V
Requirements - AWS E6011 0.30 max. 0.20 max. 0.30 max. 0.08 max.
Typical Results
(3)
- As-Welded ) 0.03 ) 0.03 ) 0.01 ) 0.01
TYPICAL OPERATING PROCEDURES
Current (Amps)
Polarity
(4)
3/32 in (2.4 mm) 1/8 in (3.2 mm) 5/32 in (4.0 mm)
AC 40-90 65-120 115-150
DC± 40-80 60-110 105-135
(1)
Typical all weld metal.
(2)
Measured with 0.2% offset.
(3)
See test results disclaimer below.
(4)
Preferred polarity is listed first.