SDS

Revision date: 11/10/2014
Hazard statement
Not applicable
Precautionary statement
Not applicable
Other hazards which do not
result in GHS classification:
Electrical Shock can kill. If welding must be performed in damp locations or
with wet clothing, on metal structures or when in cramped positions such as
sitting , kneeling or lying, or if there is a high risk of unavoidable or
accidental contact with workpiece, use the following equipment:
Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with
Reduced Voltage Control.
Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite
combustibles and flammable materials. Overexposure to welding fumes
and gases can be hazardous. Read and understand the manufacturer’s
instructions, Safety Data Sheets and the precautionary labels before using
this product. Refer to Section 8.
Substance(s) formed under the
conditions of use:
The welding fume produced from this welding electrode may contain the
following constituent(s) and/or their complex metallic oxides as well as solid
particles or other constituents from the consumables, base metal, or base
metal coating not listed below:
Chemical identity
CAS-No.
Carbon dioxide
124-38-9
Carbon monoxide
630-08-0
Nitrogen dioxide
10102-44-0
Ozone
10028-15-6
Manganese
7439-96-5
3. COMPOSITION / INFORMATION ON INGREDIENTS
Reportable Hazardous Ingredients
Chemical identity
CAS number
Content in percent (%)*
Iron
7439-89-6
60 - 100%
Manganese
7439-96-5
1 - 5%
Silicon
7440-21-3
0.5 - 5%
* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
Composition comments:
The term “Hazardous Ingredients” should be interpreted as a term defined
in Hazard Communication standards and does not necessarily imply the
existence of a welding hazard. The product may contain additional non-
hazardous ingredients or may form additional compounds under the
condition of use. Refer to Sections 2 and 8 for more information.
SDS_North America - 200000000282 2/18