Owner manual

A-1
INSTALLATION
RANGER® 225
A-1
TECHNICAL SPECIFICATIONS - RANGER® 225 ( K2857-1)
INPUT - GASOLINE ENGINE
RATED OUTPUT @ 104°F (40°C)- WELDER
RATED OUTPUT @ 104°F (40°C)- GENERATOR
Welding Output
DC Constant Current 225A/25V/40%
DC Constant Current 210A / 25V / 100%
DC Constant Voltage 200A / 20V / 100%
Auxiliary Power
1
9,000 Watts Continuous, 60 Hz AC
10,500 Watts Peak, 60 Hz AC
120/240 Volts
Make/Model
Kohler
CH23S,
CH680
CH730
Description
2 cylinder
4 Cycle
Air-Cooled
Gasoline
Engine.
Aluminum Alloy
with Cast Iron
Liners,
Electronic
Ignition
Operating
Speed (RPM)
High Idle 3700
Full Load 3500
Low Idle 2200
Displacement
cu. in.
(cu.cm.)
41.1(674)
44.2(724)
Capacities
Fuel:
12 Gal (45.4 L)
Lubricating Oil:
2.0 Qts. (1.9 L)
Horsepower
23 HP @
3600 RPM
Starting
System
12VDC
Battery
Electric Start
Group 58
Battery
(435 cold
Cranking
Amps)
1
Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
When welding available auxiliary power will be reduced.
RECEPTACLES
(2) 120VAC Duplex (5-20R)
(1) 120/240VAC Dual Voltage
Full KVA (14-50R)
BATTERY CHARGING CIRCUIT BREAKER
20AMP for Engine Battery
Charging Circuit
AUXILIARY POWER CIRCUIT BREAKER
Two 20AMP for Two Duplex Receptacle
(1) 40AMP for Dual Voltage (2-pole)
RECEPTACLES AND CIRCUIT BREAKERS
HEIGHT WIDTH DEPTH MODEL / WEIGHT
30.00** in. 21.50 in 42.25 in.
762.0 mm 546.0 mm 1073.0 mm
LUBRICATION VALVE LIFTERS FUEL SYSTEM GOVERNOR
Full Pressure Hydraulic Mechanical Fuel Pump Mechanical Governor
with Full Flow Filter Additional electric fuel lift pump
5% Regulation on K2382-4.
AIR CLEANER ENGINE IDLER MUFFLER ENGINE PROTECTION
Low noise Muffler: Top outlet Shutdown on low oil
Dual Element Automatic Idler can be rotated. Made from pressure.
long life, aluminized steel.
PHYSICAL DIMENSIONS
ENGINE COMPONENTS
** Top of enclosure, add 6.00”(152mm) for exhaust.
Codes 11797 and below
514 lbs. (233kg.)
Code 12093
523 lbs. (237kg.)