Manual
"'( (#"
*&(,
J
!#
&#+"$&#)&
1.Makecertaintheinputpowerswitchontherearof
the machine is on the “Off” position. See Figure
A.14.
2.Disconnect the input power cord from theback of
themachine.
3.Disconnecttheremainingcablesintheclusterfrom
themonitor.
4.DisconnectUSBandaudiojackontheaudiovisual
(A/V)cableclusterfromthespeakers.
5.Securetheunigunattachment(s)andweldcoupons
intotheleftsideaccesspanel.SeeFigureA.15.
6.Removeriserarmassemblyfromthecouponriser
stand by removing the two pins securing the two
piecestogether.SeeFigureA.16.
7.Remove the coupon riser stand from the coupon
riser base by pressing down on the release tab
locatedonthebaseandslidingoffthestand.See
FigureA.16.Couponriserstandandbasecannow
besetasideforrepackaging.
8.Disconnect and repackage the following cables
fromtherearofthemachine:
•RiserArmCable
•AudioVisual(A/V)CableCluster
•MachineInputLineCable
9.Carefully place components into the component
compartmentontherightsideofthemachine.See
Right Side Component Compartment Diagram
(Figure A.10).
"#( #@757</: >/197<5 ;/B3@7/:A AC16 /A 4=/;
/<2 >:/AB71 0/5 /@3 @31=;;3<232 74
;/167<37AB=03@3:=1/B32
="#( A67> ;=<7B=@E7B6=CB 7BA>/19/5
7<54=/;
)&M "$)($#+&'+(
INPUT
POWER
SWITCH
(&'#1/<97::
•#<:G?C/:74732>3@A=<<3:A6=C:2
>3@4=@;B67A7<AB/::/B7=<
I(C@< B63 7<>CB >=E3@ # /<2
C<>:C5B63;/167<34@=;B63@313>
B/1:3 034=@3 E=@97<5=< B67A3?C7>
;3<B
I:E/GA 1=<<31BB63*&(,
J
!# B=/>=E3@
AC>>:G 5@=C<232 /11=@27<5 B= B63 "/B7=</:
:31B@71/:=23/<2:=1/:1=23A
------------------------------------------------------------
+&""
)&M )")"#)$#"
"((!"('
LEFT SIDE
ACCESS PANEL
MACHINE
FRONT
VR SMAW ADAPTER
(OPTIONAL) K3165-3
)&M #)$#"&'&
'(""'
RISER ARM
ASSEMBLY
COUPON
RISER
STAND
COUPON
RISER
BASE
PINS (2)
)(#"
)(#"