Manual


#$&(#""'(&)(#&!#

(# &"(#&
(factorydefaults)
#*&*+
Thetoleranceeditorallowsuserstomodifythesystem
settings from the default to fit their curriculum.  See
FigureB.8.
The VRTEX
®
MOBILE ships with Lincoln “default”
weldingparameterspre-installed.Theparameterscan
bemodifiedbytheinstructortoreflectaspecificweld-
ingapplicationortechnique.UnderChooseTolerance
Setuptheinstructorcanselect:
•Defaults
•EntryLevel
•Intermediate
•Advanced
TouchthegreenCAB=;7H3 icontoviewthevarious
processoptionslistedbelow:
•WFSrange
•Voltagerange
•Amperagerange
•Gasmixture
•Gasflowrate
Thetechniqueparametersidealrangevaluescanalso
beviewed:
•Aim
•CTWD/Arclength
•Workangle
•Travelangle
•TravelSpeed
•Whip(SMAW-Optional)
•Weave
6/<57<5 B63 A3BB7<5A 7<B63 B=:3@/<13327B=@ E7::
2@/;/B71/::G/4431B6=EB63AGAB3;@C<A7<1:C27<5
A1=@7<5 D7AC/: 1C3A /<2 27A1=<B7<C7B73A (/93
1/@37<16/<57<5B63A3BB7<5A=4B63B=:3@/<13327
B=@/A<=BB=@34:31BC<@3/:7AB71E3:27<5A7BC/B7=<A
##'(# &"'()$
Displays the list of all tolerance settings currently
storedontheunit.Allunitsshipwithdefaultsettings.
If the user creates multiple tolerance files, the file in
useisselectedbyselectingtheredicon.Thisaffects
thevisualcues,graphs,discontinuitiesandscore.The
currenttolerancesettingsinusearealsolistedonthis
screen.
""(# &" * '
Thefollowingstepsdescribetheproceduretochange
tolerancesfortheVRTEX
®
MOBILE:
1.Select(=:3@/<13A.
2.Select27B.
3.Select@3/B3"3E.
4.Enter a new tolerance name on the keyboard
screen.
5.Select=<B7<C3.
6.Scrollthrough“ChooseToleranceSetup”menu.
7.Select icon with desired name by touching the
namedisplayedinthefield.
"#( When desired tolerance name is properly
selected,thatnamewillbedisplayedatthetop
ofthescreennextto“CurrentTolerance”.
8.Select“Customize”.
9.Select white arrows and continue icon to scroll
throughtolerancesetupoptions.
##'(# &"(# #
This displays the list of all tolerance sets currently
storedontheUSBdevice.Filescanbetransferredto
and from a VRTEX
®
MOBILE with a USB memory
device.
*&(,
J
!# 
)&M (# &"'
)(#"