Manual


#$&(#")'&!#

(#"(&()'&'&"
'-'(!'()$"#&!(#"
Whensettingupthevirtualequipment,theusermust
set the weldingparameters (e.g.wire feed speedfor
VRGMAW)withintherangessetinthetoleranceedi-
tor.ThesystemshipswithLincolndefaulttolerances.
Lincolndefaulttolerancescanbereviewedinthetoler-
ance editor, or refer to the Default Weld Process
SettingsChart(ifusingthedefaultsettings)locatedat
theendofthisOPERATIONSECTION.
However,userscansetandusetheirowntolerances
for teaching beginner welders.  The tolerances also
determinehowtheuserisscoredonsuchparameters
asworkangle,travelangle,travelspeed,position,and
contacttiptoworkdistanceorarclength.Thesoftware
willsteptheuserthroughthefollowingsetupscreens:
•Login
•Jointconfigurationselection
•Processselection
•Standsetup
•Environment
•Gassetup
•Weldmachinesettings
•Instructor’sview
•Welder’sview
•LASER(LiveActionStudentEvaluationReport)
The key icon located at the lower left corner of the
screenallowstheusertoaccesstheInstructorMode
with additional information and set-up pages.  See
Operation (Instructor Mode).
•Weldometer™
•ToleranceEditor
•Options
•Update
•LicenseInformation
"#( Iftheloginscreendoesnotappear,touchthe
back icon repeatedly until the login screen
appears.SeeFigureB.20.
#"'&"
#*&*+
Thispageallowstheuserto:(SeeFigureB.20):
•EnterUsername
•SelectLanguagePreference“OrangeIcon”
•SelectImperialorMetricUnits“BlueIcon”
•ShutdownSystem“RedMenuIcon”
•ContinuetothenextSetupScreen“GreenIcon”
•Theory“YellowIcon”
#<'1@33<3G0=/@2
Theuserenterstheirnamebyusingtheonscreenkey-
board.Theusercanselectshiftorlock(equivalentto
capslockonastandardkeyboard)atanytime.Ifthe
usermakesamistake,theycanselectthebackarrow
todeletethelastcharacterentered.
 /<5C/53
Selecting the orange language menu icon brings up
thelistoflanguagesthesoftwaresupports.Touchthe
desiredicon.
*&(,
J
!# 
)&M ")'&"
)&M #"'&"