Manual


#$&(#")'&!#

#"(#")&(#"
' (#"'&"
#*&*+
Theuserselectswhichjointconfigurationtheywantto
virtuallyweld.First,theuserselectsthejointandposi-
tion.Arotatingviewofthehighlightedcouponshows
intheupperarea.Forsomeconfigurations,theuser
willbegiventhechoiceofmaterialthicknesstochoose
from.SeeFigureB.23.

Selecting /19 takes the user back to the previous
screen.
$&#''' (#"'&"
#*&*+
This screen allows the user to select the welding
processes.SeeFigure B.24. Tochange amongVR
GMAW,VRFCAW,andVRSMAW(optional),theuser
touchesthedesiredprocesses.Ifaprocessisnotsup-
portedfortheselectedmaterial/thickness,itisgrayed
outonthisscreenandcannotbeselected.Tochoose
amongdifferentsub-processes,touchtheappropriate
icon.
Atthetopofthescreen,theusercanseethecoupon
positionandthicknessselected.Astheusercontinues
tosetupthesimulation,additionalinformationwillbe
addedtotherightofthisreadout,sothattheusercan
referencewhathaspreviouslybeenselected.
!")#"
Selecting =5=CB brings the user back to the login
screen,withtheuser’snameremoved.
"#)$#"(-$
Selecting 6/<53 =C>=< (G>3 goes back to the
configurationselectionscreen.

Selecting/19 takestheusertothepreviousscreen.
*&(,
J
!# 
)&M #"(#")&(#"'&"
)&M $&#''' (#"'&"