Manual


#$&(#")'&!#

*') )'
Visual cues areaids to helpusers learn faster. The
travelspeed,CTWD,arclength,andtravel/workangle
cuesindicatewhethertheuseriswithinthetolerances
setinthetoleranceseditor.Generally,thesecuesare
colorcodedaswellassymbolic.Whencuesarered,
theyindicatebeingoutoftolerance.Yellowcuesindi-
cateclose to tolerance,butnot optimal. Greencues
indicatebeingwithintoleranceandclosetooptimal.
TheN63/B3@O 3<A magnifiestheimageasseenby
theuserinthehelmetandinthewelder’sview.The
usercan toggle betweenOff,1.25X, 1.5X,1.75X,2X
selecttheiroptionwiththeredselecticon.
(@/D3: '>332 turns on the travel speed visual cue.
This cue is located on the side of the VR
GMAW/FCAW Gun or VR SMAW (optional) device.
SeeFigureB.33.Thiscueusesthecolorcodingposi-
tiontoindicatetravelspeed.
"#( Thegoalistokeepthearrowinthecenterof
thegraphwhichwillalsokeepitgreen.
The(+ (ContactTipToWorkDistance)cueisonly
available for VR GMAW and VR FCAW processes.
This cue uses color and position to indicate proper
CTWD.SeeFigureB.34.Thegoalistogetthetipof
thegreenarrowonthelineofthe“H”barandkeepthe
arrowcolorgreen.
The (@/D3:+=@9 <5:3 cue can be used with the
SMAW (optional), GMAWor FCAW processes.  See
FigureB.35.Thegoalofthiscueistocenterthecircle
inthecrosshairandkeepthecolorgreen.
The7; cuecanbeusedwiththeVRSMAW(option-
al),VRGMAWor VRFCAW processes.SeeFigure
B.36. The goal of this cue is to position the VR
GMAW/FCAWGunorVR SMAW(optional)deviceso
theaimcueisathingreenline.Thisindicatedthatthe
weldisbeingmadeinthecorrectlocationorposition.
*&(,
J
!# 
)&M (&* '$*') )
)&M (+#"((($
(#+#&'("
)&M (&* +#&" 
)&M !