User Manual

ManualsBrandsLincoln Electric ManualsSafetyIM10170 VIKING 5X4 SHADE 11 HELMET

• Sales and Service through Subsidiaries and Distributors Worldwide •

Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

• World's Leader in Welding and Cutting Products •

VIKING™ 5X4 SHADE 11 HELMET

4.50

5.25 STANDARD REPLACEMENT LENS

OPERATOR’S MANUAL

IM10170

August 2013

TABLE OF CONTENTS Page

SAFETY WARNINGS – READ BEFORE USING 1

OPERATING INSTRUCTIONS 2

HELMET CARE AND MAINTENANCE 3

SHADE GUIDE SETTINGS AND LENS REPLACEMENT

WARRANTY INFORMATION 5

REPLACEMENT PARTS 5

RETURN TO MAIN MENU

Summary of content (8 pages)

PAGE 1
RETURN TO MAIN MENU IM10170 VIKING™ 5X4 SHADE 11 HELMET August 2013 4.50 x 5.25 STANDARD REPLACEMENT LENS OPERATOR’S MANUAL Copyright © Lincoln Global Inc. • World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.
PAGE 2
IM10170 VIKING™ 5X4 SHADE 11 HELMET August 2013 4.50 x 5.25 STANDARD REPLACEMENT LENS OPERATOR’S MANUAL Copyright © Lincoln Global Inc. • World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.
PAGE 3
OPERATING INSTRUCTIONS SAFETY WARNINGS – READ BEFORE USING Headgear Adjustment WARNING Crown Adjustment ARC Rays can injure eyes and burn skin • Before welding, always inspect helmet and filter lens to be sure they are fitted properly, in good condition and not damaged. • Check to see that the clear lens is clean and securely attached to the helmet. • Always wear safety glasses or goggles under the welding helmet and protective clothing to protect your skin from radiation, burns and spatter.
PAGE 4
OPERATING INSTRUCTIONS SAFETY WARNINGS – READ BEFORE USING Headgear Adjustment WARNING Crown Adjustment ARC Rays can injure eyes and burn skin • Before welding, always inspect helmet and filter lens to be sure they are fitted properly, in good condition and not damaged. • Check to see that the clear lens is clean and securely attached to the helmet. • Always wear safety glasses or goggles under the welding helmet and protective clothing to protect your skin from radiation, burns and spatter.
PAGE 5
HELMET CARE AND MAINTENANCE FILTER PLATE AND LENS REPLACEMENT • Periodic cleaning with soapy water solution or standard glass cleaner is suggested. Air dry or use soft cloth to dry. * Change or clean polycarbonate impact resistant clear lens when it becomes dirty or cloudy Storage: Store in a clean, dry location. SHADE GUIDE SETTINGS GUIDE FOR SHADE NUMBERS ELECTRODE SIZE 1/32 in. (mm) ARC CURRENT (A) MINIMUM PROTECTIVE SHADE SUGGESTED(1) SHADE NO. (COMFORT) Less than 3 (2.5) 3-5 (2.5–4) 5-8 (4–6.
PAGE 6
HELMET CARE AND MAINTENANCE FILTER PLATE AND LENS REPLACEMENT • Periodic cleaning with soapy water solution or standard glass cleaner is suggested. Air dry or use soft cloth to dry. * Change or clean polycarbonate impact resistant clear lens when it becomes dirty or cloudy Storage: Store in a clean, dry location. SHADE GUIDE SETTINGS GUIDE FOR SHADE NUMBERS ELECTRODE SIZE 1/32 in. (mm) ARC CURRENT (A) MINIMUM PROTECTIVE SHADE SUGGESTED(1) SHADE NO. (COMFORT) Less than 3 (2.5) 3-5 (2.5–4) 5-8 (4–6.
PAGE 7
WARRANTY INFORMATION WARRANTY INFORMATION: Reference IMWS1 included in Literature. SPATTER DAMAGE IS NOT COVERED BY WARRANTY: Do not use this product without the correct protective outside clear lens installed. The outside clear lens supplied with this helmet is properly sized to work with this product and substitutions from other suppliers should be avoided. REPLACEMENT PARTS 4 1 7 3 2 8 6 ITEM 1 2 3 4 5* 6 7 8 PART NO.
PAGE 8
WARRANTY INFORMATION WARRANTY INFORMATION: Reference IMWS1 included in Literature. SPATTER DAMAGE IS NOT COVERED BY WARRANTY: Do not use this product without the correct protective outside clear lens installed. The outside clear lens supplied with this helmet is properly sized to work with this product and substitutions from other suppliers should be avoided. REPLACEMENT PARTS 4 1 7 3 2 8 6 ITEM 1 2 3 4 5* 6 7 8 PART NO.