RETURN TO MAIN MENU IM547 X-Tractor 2G For use with equipment having Code Number: July, 1999 8357 Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... and thoughtful operation on your part. DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL AND THE SAFETY PRECAUTIONS CONTAINED THROUGHOUT. And, most importantly, think before you act and be careful.
i i SAFETY WARNING CALIFORNIA PROPOSITION 65 WARNINGS Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm. The Above For Diesel Engines The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. The Above For Gasoline Engines ARC WELDING CAN BE HAZARDOUS.
ii ii SAFETY ELECTRIC SHOCK can kill. 3.a. The electrode and work (or ground) circuits are electrically “hot” when the welder is on. Do not touch these “hot” parts with your bare skin or wet clothing. Wear dry, hole-free gloves to insulate hands. 3.b. Insulate yourself from work and ground using dry insulation. Make certain the insulation is large enough to cover your full area of physical contact with work and ground.
iii iii SAFETY WELDING SPARKS can cause fire or explosion. 6.a. Remove fire hazards from the welding area. If this is not possible, cover them to prevent the welding sparks from starting a fire. Remember that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas. Avoid welding near hydraulic lines. Have a fire extinguisher readily available. 6.b.
iv iv SAFETY PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suivantes: Sûreté Pour Soudage A L’Arc 1. Protegez-vous contre la secousse électrique: a. Les circuits à l’électrode et à la piéce sont sous tension quand la machine à souder est en marche.
v v Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! Please Examine Carton and Equipment For Damage Immediately When this equipment is shipped, title passes to the purchaser upon receipt by the carrier.
TABLE OF CONTENTS Safety Page .......................................................................................................................................i-iv Installation.......................................................................................................................Section A Technical Specifications .......................................................................................................A-1 Safety Precautions ................................................
A-1 A-1 INSTALLATION Technical Specifications- X-tractor 2G INPUT Sales Spec Input Voltage K184 Input Current 230/460 3 Ph. 60 Hz 220/440 3 Ph. 50 Hz 11.0/5.5 9.4/4.7 VACUUM SPECIFICATIONS Air Flow 110 C.F.M. @ 43” WG (187 m3 / h @ 1100 mm WG) FILTER TYPE Polyester Sateen - Manually Cleaned with shaker handle OPERATING SOUND LEVEL 74 dB(A) @ 3.0 Ft. AUTOMATIC PROTECTION CIRCUIT Thermal Protection is provided for vacuum motor PHYSICAL DIMENSIONS HEIGHT 50.
A-2 INSTALLATION Read this entire installation section before you start installation. SAFETY PRECAUTIONS Do not attempt to use this equipment until you have thoroughly read all installation, operating and maintenance information supplied with your equipment. They include important safety precautions and detailed operating and maintenance instructions. WARNING ELECTRIC SHOCK can kill. • Do not touch electrically live parts such as internal wiring.
A-3 Input Hertz Voltage 230 60 460 60 220 50* 440 50* A-3 INSTALLATION Input Fuse Size 15 7 15 7 Power input cable copper wire size 3 wires in conduit or 3 conductor cable #14 #14 #14 #14 Ground Wire #14 #14 #14 #14 *Note On 50 hertz operation the vacuum ratings of the motors will be reduced due to change in motor speed. On 50 hertz power, X-tractor 2G will provide enough vacuum for operation of one gun or marginal smoke pickup if two guns are used.
B-1 OPERATION & MAINTENANCE B-1 Read and understand this entire section before operating your X-Tractor 2G. Only qualified personnel should operate this equipment. SAFETY INSTRUCTIONS ADDITIONAL SAFETY PRECAUTIONS Do not attempt to use this equipment until you have thoroughly read all operating and maintenance manuals supplied with your equipment and any related welding machine it will be used with. They include important safety precautions, operating and maintenance instructions and parts lists.
C-1 C-1 DIAGRAMS A.N.S.I. ELECTRICAL SYMBOLS PER E1537 NOTE: SEE INPUT CONNECTION INSTRUCTIONS FOR PROPER VOLTAGE CONNECTIONS. TO SUPPLY LINES PILOT TRANSFORMER H1 H3 H2 LINE L1 L2 L3 STARTER T1 T2 T3 X2 GREEN X1 TRANSFORMER MTG. SCREW 500 CONTROL BOX GND STUD 501 503 R 504 VACCUM MOTOR 502 MOTOR THERMOSTAT THE LINCOLN ELECTRIC CO. CLEVELAND, OHIO U.S.A.
1 PARTS 1 PARTS MANUAL MAGNUM X-TRACTOR 2G Code:8357 This parts list is provided as an informative guide only. This information was accurate at the time of printing. However, since these pages are regularly updated in Lincoln Electric’s official Parts Book (BK-34), always check with your Lincoln parts supplier for the latest parts information.
2 2 PARTS P-112-C P-112-C GENERAL ASSEMBLY 16 3 6 15 5 7 11 1 8 12 13 L6464 10-10-80N 1-96 X-TRACTOR 2G
3 3 PARTS P-112-C.1 P-112-C.1 Use only the parts marked “X” in the column under the heading number called for in the model index page.
NOTES X-TRACTOR 2G
Now Available...12th Edition The Procedure Handbook of Arc Welding New Lessons in Arc Welding This printing will go fast so don’t delay. Place your order now using the coupon below. Lessons, simply written, cover manipulatory techniques; machine and electrode characteristics; related subjects, such as distortion; and supplemental information on arc welding applications, speeds and costs. Practice materials, exercises, questions and answers are suggested for each lesson.
● Do not touch electrically live parts or WARNING Spanish AVISO DE PRECAUCION French ATTENTION German WARNUNG Portuguese ATENÇÃO ● Keep flammable materials away. ● Wear eye, ear and body protection. ● Mantenga el material combustible ● Protéjase los ojos, los oídos y el electrode with skin or wet clothing. ● Insulate yourself from work and ground. ● No toque las partes o los electrodos bajo carga con la piel o ropa mojada. ● Aislese del trabajo y de la tierra.
● Keep your head out of fumes. ● Use ventilation or exhaust to ● Turn power off before servicing. ● Do not operate with panel open or guards off. remove fumes from breathing zone. ● Los humos fuera de la zona de res- piración. ● Mantenga la cabeza fuera de los humos. Utilice ventilación o aspiración para gases. ● Gardez la tête à l’écart des fumées. ● Utilisez un ventilateur ou un aspira- ● Desconectar el cable de ali- mentación de poder de la máquina antes de iniciar cualquier servicio.