Instruction Manual

Chapter 8. Summary Tab – Power Source Level Last 7 Days
8.10 CheckPoint™ User Manual IM8000
WeldScore™ (Last 24 Hours)
The WeldScore (Last 24 Hours) graph (Figure 8.11) displays the number of welds scored on the Welding
Power Source (meaning that a Weld Profile was selected when creating the weld) and the number of welds
not scored (meaning that a Weld Profile was not selected when creating the weld), as well as the average
WeldScore™ per hour on the Welding Power Source.
Figure 8.11 WeldScore™ (Last 24 Hours)
Last 7 Days
On the Summary tab, you can also view a week’s worth of information about your welding operations. The
widgets under Last 7 Days provide a breakdown of utilization and production over the past seven days,
similar to the 24-hour Today widgets. In addition, you can review the Average True Energy™ for the
Welding Power Source over the last seven days.
Utilization (Last 7 Days)
The Utilization (Last 7 Days) pie chart shows the total arc-on time compared to idle, disconnected and
faulted time (Figure 8.12). It reflects the amount of time that the Welding Power Source was in use (or not
in use) over the last seven days. The pie chart breaks that information down into the percentage of the last
seven days and displays how much of the total time the Welding Power Sources spent in each of the
statuses: Welding, Idle, Faulted and Disconnected. The bar graph shows the utilization in hours for each of
the seven days. These are both rolling seven-day graph.