Instruction Manual

Chapter 10. Assembly Listing Tab By Assembly
10.6 CheckPoint™ User Manual IM8000
Table 11.2 on page 11.4 explains each of the columns on this report. This is the same as a Weld Listing
report, just for this instance of the Weld Sequence. From here, you can click the link in the Start of Weld
column for each weld and review the in-depth details of the weld (Figure 11.3 on page 11.5). Table 11.3 on
page 11.6 explains the information in detail.
By Assembly
If you want to view a list of all assemblies (i.e., instances of Weld Sequences), the By Assembly tab provides
this history with the most recent one listed first. From this report you can drill down to the list of individual
welds in the assembly and then into each individual weld record details, just like with the Overview reports.
You can also use the Criteria link to specify a date range and specific assembly.
Figure 10.4 By Assembly Tab
See Table 10.2 on page 10.4 for details on the columns of this report. When you click the link in the Start
Time column, CheckPoint™ displays the list of individual welds for that instance of the Weld Sequence
(similar to Figure 11.1 on page 11.1). Table 11.1 on page 11.2 explains the columns in detail.
From there you can click the Start of Weld column to displays the in-depth details of the individual weld
(Figure 11.3 on page 11.5). Table 11.3 on page 11.6 explains the information in detail.
TIP | For details on the colored indicators at the beginning of
each row, please refer to page 10.3.