RETURN TO MAIN MENU IM294-C August, 2006 LN-9 SEMIAUTOMATIC WIRE FEEDER June, 2010 For Submerged Arc, Innershield® and Other Open Arc Semiautomatic Arc Welding Processes For Operation with Appropriate Lincoln Power Sources Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... and thoughtful operation on your part.
i i SAFETY WARNING CALIFORNIA PROPOSITION 65 WARNINGS Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm. The Above For Diesel Engines The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. The Above For Gasoline Engines ARC WELDING CAN BE HAZARDOUS.
ii ii SAFETY ELECTRIC SHOCK can kill. 3.a. The electrode and work (or ground) circuits are electrically “hot” when the welder is on. Do not touch these “hot” parts with your bare skin or wet clothing. Wear dry, hole-free gloves to insulate hands. 3.b. Insulate yourself from work and ground using dry insulation. Make certain the insulation is large enough to cover your full area of physical contact with work and ground.
SAFETY iii WELDING and CUTTING SPARKS can cause fire or explosion. 6.a. Remove fire hazards from the welding area. If this is not possible, cover them to prevent the welding sparks from starting a fire. Remember that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas. Avoid welding near hydraulic lines. Have a fire extinguisher readily available. 6.b.
iv SAFETY PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suivantes: Sûreté Pour Soudage A L’Arc 1. Protegez-vous contre la secousse électrique: a. Les circuits à l’électrode et à la piéce sont sous tension quand la machine à souder est en marche.
v v Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! CUSTOMER ASSISTANCE POLICY The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their expectations.
Input Power (115VAC, 4.5A) is supplied by the power souce.
Sec. N2.3.2 (continue) 9. Actual Value Push Button: This button us used to allow the meter to be changed from a preset readout to a reading of actual arc voltage or wire feed speed. 10. Direct Work Lead Jack (below code 8200): This jack permits connection of the direct work clip lead to the LN-9 to more accurately monitor arc voltage. See Sec. N4.4.4 for direct work lead connection of later LN-9 models. 11. Duty Cycle: The amount of welding performed in a 10 minute period, expressed as a percentage.
P-127-B.2 P-127-B.2 MISCELLANEOUS ITEMS (These Items Are Not Illustrated) # Indicates a Change This Printing ITEM DESCRIPTION PART NO.
NOTES LN9 AND LN9 GMA
P-127-C P-127-C Part Numbers CONTROL BOX LN9 & LN9 GMA (2-Roll & 4-Roll) 4 5A Part Numbers 6A 6B 1 2 5D 10 Part Numbers 9C 9B 7 8 3 9A 13 12 11 Part Numbers 12 LN9 AND LN9 GMA 1-28-2002
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-C.1 P-127-C.1 # Indicates a Change This Printing ITEM 1 1 1 1 2 3 4 5A 5B 5C 5D 5E 6A 6A 6A 6A 6B 7 8 9 9A 9B 9C 9D 10 11 12 13 Use Column 1 for LN9, LN9H, LN9 GMA (2 Roll Drive) Use Column 2 for LN9, and LN9 GMA (4 Roll Drive) Use only the parts marked “X” in the column under the heading number called for in the model index page. DESCRIPTION PART NO.
P-127-D P-127-D Part Numbers HINGED DOOR ASSEMBLY LN9 & LN9 GMA (2-Roll & 4-Roll) 1 Part Numbers 5 2 8C 3 8A 8B 4A 4B Part Numbers 7 6 9 Part Numbers 10 LN9 AND LN9 GMA 1-96
Sub Assembly Illustration P-127-D.1 P-127-D.1 Use Column 1 for LN9, LN9H, LN9 GMA (2 Roll Drive) Use Column 2 for LN9, and LN9 GMA (4 Roll Drive) # Indicates a Change This Printing ITEM Sub Assembly Illustration 1 2 2 2 3 4A 4A 4A 4A 4A 4B 5 6 PART NO.
P-127-E P-127-E Part Numbers BASE PLATFORM LN9 & LN9 GMA (2-Roll & 4-Roll) 13B Part Numbers 5 Part of 13A 10A 11A 10B 12 6 4 1 2 3 13A 11B 7C 16A 16B 7A 8 Part Numbers Part of 13B 9B 15 16A 16B 8 9C 9A 7B 9D 9E 9F Part Numbers 9C LN9 AND LN9 GMA 1-28-2002
Sub Assembly Illustration P-127-E.1 Sub Assembly Illustration Sub Assembly Illustration Use Column one for (2 Roll). Use Column two for (4 Roll) # Indicates a Change This Printing ITEM 1 1 1 1 1 2 2 3 4 5 6 7A 7B 7C 8 9A 9B 9C 9D 9E 9F 10A 10B 11A 11B 11C 12 13 13 13 13A 13B 13B 13C Sub Assembly Illustration P-127-E.1 14 15 16A 16B DESCRIPTION PART NO.
P-127-F P-127-F Part Numbers CONTROL PANEL INSTRUMENT ASSEMBLY LN9 & LN9 GMA (2-Roll & 4-Roll) 1A 1B 1C Part Numbers 1D 8C 8B 8B Not Sold 2 8C 10C 3 8C 8B 4 3 8B 13 Part Numbers 9 11 6 10B 5B 7B 5C 5A 8C 7A 5D 12 7D 8A 8A 15 Part Numbers 10A LN9 AND LN9 GMA 1-96
Sub Assembly Illustration Sub Assembly Illustration P-127-F.1 # Indicates a Change This Printing ITEM 1A 1B 1B 1C 1D 1D 2 3 4 5A 5A 5A 5B 5B 5C 5D 6 6 7A 7A 7B 7B Sub Assembly Illustration Sub Assembly Illustration P-127-F.1 7B 7C 7D 8A 8B 8C 9 10A 10B 10C 11 12 13 14 14 15 DESCRIPTION PART NO. Self Tapping Screw Trigger P.C. Board Trigger P.C. Board (Above Code 8000)(GMA) Plastic Expansion Nut P.C. Board Insulation (Below Code 8000) P.C.
P-127-G P-127-G Part Numbers METER PANEL ASSEMBLY 3 4 7D 7C 16 15 2C Part Numbers 10A 6 9B 7A 13 10B 7B 10C 17 9A 14 1 9C 9D 8 2A 5 12 10C 11B Part Numbers Part Numbers 11A 2B LN9 AND LN9 GMA 1-96
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-G.1 P-127-G.1 For Codes Below 8000, use parts marked “X” in Column 1. For Codes 8000 to 8700, use parts marked “X” in Column 2. For Codes Above 8700, use parts marked “X” in Column 3. # Indicates a Change This Printing ITEM 1 1 2A 2B 2C 3 4 5 5 5 5 6 6 7A 7A 7A 7B 7C 7D 8 8 9A 9B 9C 9D 10A 10B 10C 11A 11B 12 13 14 15 16 16 17 17 17 18A 18B 18C 19A 19B 19C DESCRIPTION PART NO.
P-127-H P-127-H Part Numbers WIRE DRIVE LN9, LN9H, LN9F, LN9FH 1A 1B 2 3A 3C 3B 6 4A 5 4B Part Numbers 7 9 8 11A 10 11B 12A 12E 32 12C 12D 31 12K 22 26 33 15C 36 34 12B 23 15B 16 Part Numbers 14B 35 21 14A 23 20 39 24 23 30 25 37 15A 13 23 12H 12F 25 12K 22 18 12G 19 20 21 12J Part Numbers 27 28 29B 29C 29A LN9 AND LN9 GMA 12-22-2009
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-H.1 P-127-H.1 For For For For # Indicates a Change This Printing ITEM 1A 1B 2 3A 3B 3C 4A 4B 4C 5 6 7 8 9 10 11A 11B 12 12A 12 12A 12 12A 12 12A 12B 12B 12C 12D 12D 12D 12D 12E 12E 12E 12E 12F 12G 12H 12J 12K 12L 12M DESCRIPTION PART NO.
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-H.2 P-127-H.2 For For For For # Indicates a Change This Printing ITEM 13 13 14A 14A 14A 14A 14A 14B 14C 15A 15A 15B 15C 16 18 19 20 21 22 23 24 25 26 27 28 29A 29B 29C 30 30 31 32 33 34 35 36 37 38 38 39 40 41 42 43 DESCRIPTION LN9, use parts marked “X” in Column 1. LN9F, use parts marked “X” in Column 2. LN9H, use parts marked “X” in Column 3. LN9FH, use parts marked “X” in Column 4.
NOTES LN9 AND LN9 GMA
P-127-J P-127-J Part Numbers WIRE DRIVE, MOTOR & GEAR BOX ASSEMBLY LN9 GMA & LN9F GMA (4-Roll) 22D 1A 1B Part Numbers 1F 22F 25 1C 1E 22G 22H 22K 22J 7A 23 18D 22E 22N 7B 2 18B 5 14 22A 6 13 7C 16B 18C 10 17 16A 8 9B 15 9C 11 3A 9A 12B 3B 12D Part Numbers 12C 3C 12C 12B 12A 3D 19 20 21 Part Numbers 18A LN9 AND LN9 GMA 1-28-2002
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-J.1 ITEM 1 1 1A 1B 1B 1B 1C 1C 1C 1D 1E 1F 1G 2 3A 3B 3C 3D 5 6 7A 7B 7B 7C 8 8 9A 9B 9C 10 11 12A 12B 12C 12D 13 14 15 16A 16A 16B 17 18A 18B 18C 18C 18D 19 ø P-127-J.
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-J.2 ITEM 20 21 22 22A 22B 22C 22D 22E 22F 22G 22H 22J 22K 22L 22M 22N 23 24 25 P-127-J.2 DESCRIPTION Gear Box Mounting Plate 1/4-20x.
NOTES LN9 AND LN9 GMA
P-127-K P-127-K Part Numbers WIRE DRIVE, MOTOR & GEAR BOX ASSEMBLY LN9 GMA & LN9F GMA (2-Roll) Old Style 10 10A 7 1A 10B 8 1B 9 Part Numbers 1C 12D 1E 1F 12C 12E 12B 2 12A 11A 6 11B 11C 15D 15B 15C 5 4 19 17 13B 14 Part Numbers 13A 23 24B 24C 24A 16 20 3A 3B 3C 25 18A 18B 18C 3D 21 Part Numbers 15A 22A 22B 22C LN9 AND LN9 GMA 10-26-2007
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-K.1 P-127-K.
P-127-K.2 # Indicates a Change This Printing ITEM 20 21 22A 22B 22C 23 24A 24B 24C 25 26 27 28 DESCRIPTION PART NO. Gear Box Insulation Gear Box Mounting Plate 1/4-20x.75 HHCS Lock Washer Plain Washer Switch Mounting Housing Assembly #10-24x1.00 RHS Lock Washer Plain Washer Sems Screw Connection Bolt Insulation (Not Shown) Hall Effect Switch, (Not Shown) Gas Solenoid & Support (Not Shown) T15049 S17979 CF000014 E106A-2 S9262-98 S21227 CF000038 E106A-1 S9262-27 T10082-4 S18169 S18160-1 M15095-1 QTY.
NOTES LN9 AND LN9 GMA
Part Numbers P-127-L P-127-L WIRE DRIVE, MOTOR & GEAR BOX ASSEMBLY LN9 & LN9F (4-Roll Drive) 1A 2 1B 3A 3B 4A 3C 4B 5 6 7 Part Numbers 8 9 11A 14B 14A 10 11B 14H 14D 12A 15 12E 14A 12D 19B 12C 19A 12K 14C Part Numbers 12B 16 19C 14E 14F 14G 17E 17A 13 17F 17C 17G 12F 17D 12G 17H 12H 17B 17D 12J 21B 21G 23 20A 20B 21E 21A Part Numbers 21D 21H 22A 21C LN9 AND LN9 GMA 1-17-97
Sub Assembly Illustration P-127-L.1 # Indicates a Change This Printing ITEM Sub Assembly Illustration 1A 1B 2 3A 3B 3C 4A 4B 4C 5 6 7 8 9 10 11A 11B 12A 12A 12B 12C 12D 12D 12E 12E 12F 12G 12H 12J 12K 12L 12M 13 14A 14B 14C 14D 14E 14F 14G 14H 15A 15B 16 Sub Assembly Illustration Sub Assembly Illustration P-127-L.1 ø DESCRIPTION PART NO. Wire Drive and Gear Box Assembly (LN9F, 4-Roll), includes: Wire Drive and Gear Box Assembly (LN9, 4-Roll), includes: #6-32x.
Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-L.2 P-127-L.2 # Indicates a Change This Printing ITEM 17A 17B 17C 17D 17E 17F 17G 17H 18 19A 19A 19B 19C 20A 20B 21A 21B 21C 21D 21E 21F 21G 21H 22A 22B 22C 22D 23 DESCRIPTION PART NO. Conductor Block S19830 1/4-20x1.
NOTES LN9 AND LN9 GMA
Part Numbers P-127-M P-127-M CONTROL BOX LN9F, LN9FH & LN9F GMA 33 1 2 29 Part Numbers 30 3 5 9 10 25 11 14 Part Numbers 23 26 22 17 Part Numbers 18 19 L7201 6-28-85M LN9 AND LN9 GMA 1-96
Sub Assembly Illustration P-127-M.1 P-127-M.1 # Indicates a Change This Printing ITEM 1 1 1 2 Sub Assembly Illustration 3 4 5 9 9 10 11 14 17 18 19 22 23 Sub Assembly Illustration 23 25 26 27 29 30 33 DESCRIPTION PART NO. Control Box Welded Assembly (LN-9F Above Code 9100) Control Box Welded Assembly (LN9F & 9FH Below Code 9100) Control Box Welded Assembly (LN-9F GMA) Resistor #10-24 x 5.
P-127-N P-127-N Part Numbers DOOR ASSEMBLY LN9F, LN9FH, & LN9F GMA 1 2 7 8 3 Part Numbers 9 4 5 6 A 13 14 15 FRONT VIEW Part Numbers A 21 22 20 17 18 19 Part Numbers REAR VIEW L7091 2-1-85B LN9 AND LN9 GMA 1-96
P-127-N.1 For For For For # Indicates a Change This Printing ITEM 1 1 1 2 2 3 3 3 3 3 3 4 4 4 4 4 5 6 6 7 8 8 9 13 14 15 17 17 17 Sub Assembly Illustration Sub Assembly Illustration Sub Assembly Illustration P-127-N.1 Sub Assembly Illustration 18 18 19 20 20 21 22 Codes Below 8000, use parts marked “X” in Column 1. Codes 8000 to 8700, use parts marked “X” in Column 2. Codes Above 8700, use parts marked “X” in Column 3. LN9F GMA, use parts marked “X” in Column 4. DESCRIPTION PART NO.
P-127-P P-127-P Part Numbers K317 DUAL PROCESS KIT 1 2 3 16 17 4 14 15 Part Numbers 5 13 6 12 7 10 8 Part Numbers Part Numbers M13524 10-8-82G LN9 AND LN9 GMA 1-96
P-127-P.1 # Indicates a Change This Printing ITEM 1 2 3 4 5 6 7 8 10 12 13 14 15 16 17 DESCRIPTION Mounting Bracket Toggle Switch Caution Decal Nameplate Number Plate Cover Case Welded Assembly Control Cable Box Connector Terminal Strip Number Plate Relay (1CR) I.D. Sticker Relay (2CR) I.D. Sticker PART NO. M13696 T13381 T13470 S16391 T10726-125 M13692 S16191 S16190 T9639-1 S8542-1 T10726-126 T13845-3 T12286-1 S14293-7 T12286-2 QTY.
P-127-R P-127-R Part Numbers K319 DUAL PROCEDURE KIT 1 2 3 15 10 Part Numbers 9 6 5 Part Numbers Part Numbers 7 L6055 11-5-82M LN9 AND LN9 GMA 1-96
P-127-R.1 # Indicates a Change This Printing ITEM 1 2 3 4 5 6 7 9 10 DESCRIPTION PART NO. QTY. 1 2 3 4 5 6 7 8 9 Control Box Rheostat Knob Cover Insulation P.C.
P-127-S P-127-S Part Numbers INSTRUMENT PANEL LN9F, LN9FH & LN9F GMA 3 2 Part Numbers 1 6 4 Part Numbers 5 Part Numbers M13647 2-10-95D LN9 AND LN9 GMA 1-96
Sub Assembly Illustration P-127-S.1 # Indicates a Change This Printing ITEM 1 2 2 Sub Assembly Illustration P-127-S.1 2 3 3 4 4 PART NO.
P-127-T P-127-T Conversion Kit Chart LN9 GMA (2 Roll Drive) CONVERSION KIT WIRE .068”-5/64 Cored (.062) 1/16 Cored or Solid* .045 & .052” .045” -.052” Cored .023” -.035” Solid .030 Solid .035 Cored .035 Solid 7/64 Cored .120 Cored 1/16A 3/64A .
NOTES LN9 AND LN9 GMA
LN9 AND LN9 GMA 9 33 Part Numbers 11 8 6 12 31 20 5 36 4 Part Numbers 14 A 1 15 16 2 3 17 A 18 19 35 32 Part Numbers 21 29 22 30 28 26 24 23 27 25 Part Numbers P-127-U P-127-U K318 DUAL PROCESS CONTACTOR KIT L6224 10-8-82G 1-96
Sub Assembly Illustration P-127-U.1 P-127-U.1 For Code 8002, use parts marked “X” in Column 1. For all other Codes, use parts marked”X” in Column 2.
P-127-V P-127-V Conversion Kit Chart LN9 (4 Roll Drive) WIRE 7/64”-.120 & 2.8-3.0 mmCored .068 & 3/32 1.7-2.4 mm Cored & Solid 1/16” & 1.6mm Solid 1/16 & 1.6mm Cored or Solid .045”-.052” & 1.0-1.4 mm Solid .045”-.052” & 1.0-1.4mm Cored .030”-.035” & 0.8-0.9mm Solid 1/16” & 1.6mm 3/64” & 1.2mm .035” & 0.
P-125-N P-125-N Par t Number s STAND ASSEMBLY FOR READI-REEL (K377) CURRENT MOLDED PLASTIC 14 OBSOLETE ALUMINUM SPINDLE ASSEMBLY 2 8 Par t Number s 4 5 2 6 9 9 8 7 WIRE WHEEL SUPPORT WIRE WHEEL SUPPORT OBSOLETE MOLDED PLASTIC SPINDLE ASSEMBLY 5 2 8 1 9 Par t Number s 3 15 13 WIRE WHEEL SUPPORT Par t Number s 10 L6940 12-19-85G 11-25-97
Sub Assembl y I l l ust r at i on P-125-N.1 # Indicates a Change This Printing ITEM DESCRIPTION For Obsolete Molded Plastic Spindle Assembly Use Column 1. For Obsolete Aluminum Spindle Assembly Use Column 2. For Current Molded Plastic Assembly Use Column 3. 1 2 3 4 5 6 7 8 9 PART NO. QTY. L6831-3 ø M14511 M14935 K363-P S10773-52 T14816 T14844 T12967-1 S9262-14 E106A-15 1/2-13 x 1.00 1/2-13 x 1.
P-125-O P-125-O Par t Number s STAND ASSEMBLY FOR 14 POUND REEL (K378) 9 12 Par t Number s 10 14 3 4 24 8 5 2 Par t Number s 13 1 7 6 11 21 20 Par t Number s 22 1-28-2002
Sub Assembl y I l l ust r at i on P-125-O.1 # Indicates a Change This Printing ITEM 1 2 Sub Assembl y I l l ust r at i on 3 4 5 6 7 8 9 10 11 12 13 14 20 21 22 Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on P-125-O.
P-107-M P-107-M INPUT CABLE AND EXTENSION CABLE ASSEMBLIES # Indicates a Change This Printing ITEM DESCRIPTION PART NO. QTY.
P-107-O P-107-O Par t Number s 50 AND 60# WIRE REEL SUPPORT 3 2 Par t Number s 1 Par t Number s 10 4 5 6 7 8 13 4 5 6 7 8 9 11 Par t Number s 12 L4699 07-26-2005
For LN-6N, 6S, 7, 8N, 8S, 9HN and 9S (K303 Wire Reel Open Shroud), use Column 1. For Enclosed LN-6NE, 8NE, 9NE and 9SE, use Column 2. For LN-7 (K376 Wire Reel, No Shroud), use Column 3. For lightweight LN-6NE, 6SE, 8NE, 9NE and 9SE, use Column 4. For LN-22 use Column 5. For K445 use Column 6. 1 2 3 4 5 6 7 8 9 ITEM DESCRIPTION PART NO. QTY.
P-107-P WIRE REEL SHAFT Par t Number s Par t Number s P-107-P 5 1 7 8 9 10 2 4 M12460 # Indicates a Change This Printing Par t Number s Par t Number s ITEM 1 2 4 4 5 5 7 8 9 9 10 11 * 11 For All LN-6, LN-7, LN-8S, 8N, 8SE, LN-9S, 9N, 9SE, 9NE, 9NH and LN-22, use Column 1. For LN-8F, LN-9F and LN-9FH, use Column 2. For SP-200, use Column 3. DESCRIPTION PART NO. QTY.
P-107-R P-107-R Par t Number s HAND CRANK ASSEMBLY LN-6, LN-7, LN-8 and LN-9 9 8 11 10 7 12 13 14 3 17 4 18 1 26 2 15 19 25 22 Par t Number s 27 6 24 5 23 21 20 L4703 # Indicates a Change This Printing ITEM Par t Number s Par t Number s 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 ø DESCRIPTION Hand Crank Assembly, Includes: Plain Washer Hex head Screw Bracket Assembly Lever Arm Stop pin Drive Screw Tension Spring Guide Tube Spacer Washer Conductor Block
P-107-S P-107-S Par t Number s FLUX TANK (LN-6, LN-7, LN-8 and LN-9) 9 3 10 6 5 12 40 7 15 8 22 11 4 13 Par t Number s 11 2 28 25 24 21 11 23 29 N.E.
# Indicates a Change This Printing t ITEM 1 1 2 3 4 5 6 7 8 9 9 10 10 11 12 13 14 15 16 17 18 20 21 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 37 37 37 38 40 Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on P-107-S.1 ø P-107-S.1 Use Column 1 for Flux Tanks with Safety Valve on Outlet Assembly. Use Column 2 for Flux Tanks with Safety Valve on Pressure Regulator.
P-107-T P-107-T Par t Number s UNDERCARRIAGE: K163 Standard with LN-6S, LN-6SE, LN-8S, LN-8SE, LN-9S and LN-9SE Par t Number s 2 9 3 4 6 # Indicates a Change This Printing ITEM 2 3 4 4 6 7 12 DESCRIPTION Undercarriage, Includes: Undercarriage, Includes: Handle Casters Base, Platform Type (Discontinued) Base, Open Frame Type Wheels Axle Flux Tank Support For optional K163 use parts marked “X” in Column 1. For LN-6S, 6SE, 8S, 8SE, 9S, and parts marked “X” in Column 2. PART NO. QTY.
NOTES
P-107-V.a P-107-V.
Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on P-107-V.b P-107-V.
P-107-W.2.a P-107-W.2.
ITEM 1 2 3 4 5 6 7 10 10 11 11 12 12 13 13 14 16 17 18 19 20 21 22 23 24 25 Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on P-107-W.2.b # Indicates a Change This Printing Sub Assembl y I l l ust r at i on Sub Assembl y I l l ust r at i on P-107-W.2.
P-107-X P-107-X Par t Number s MECHANIZED HAND TRAVEL UNIT: K110 14 NOTE: FOR PROPER LEAD CONNECTIONS SEE WIRING DIAGRAM 16 17 3 19 20 26 1 2 5 27 22 6 7 8 Par t Number s 11 15 9 23 21 28 L3865 4-3-81E METHOD OF MOUNTING EXTENSION Par t Number s Par t Number s # Indicates a Change This Printing ITEM t 1 2 3 5 6 7 8 9 11 14 15 16 17 19 20 21 22 23 26 27 28 DESCRIPTION Gun Drive Unit Assembly, Includes: Mounting Clamp Thumb Screw Control Cable and Plug Grommet Truss Head Screw Insulato
P-107-Y P-107-Y Par t Number s GEAR BOX FOR K110 4 3 Par t Number s 2 2 3 1 Par t Number s 5 6 3 2 7 # Indicates a Change This Printing Par t Number s ITEM 1 2 3 4 5 6 7 DESCRIPTION Gun Drive Gear Case Assembly, Includes: Gear Box Needle Bearing Retaining Ring Vertical Shaft Assembly Cross Shaft Assembly Shaft Cap Output Shaft Assembly Use only the parts marked “X” in the column under the heading number called for in the model index page. PART NO.
• World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.