Welder User Manual

C-1
ACCESSORIES
C-1
PIPELINER 200D
OPTIONAL FEATURES (Field Installed)
Accessory Set (K704) - Includes electrode and work
cables, headshield, work clamp and electrode holder.
Remote Control Kit (K924-5) - Contains a remote
control rheostat and 100 ft (30.5m) cable for adjusting
the OCV at the welding site.
Remote Control Kit (K2464-1) - Contains a remote
control rheostat (for adjusting CC “STICK” OCV),
remote control potentiometer (for adjusting CV
“STICK” OCV) and 100ft. (30.5m) cable.
(See Wiring/Connection Diagram Section)
Trailer (K957-1) - Two-wheeled trailer for in-plant and
yard towing at speeds under 20 mph only.
Trailer (K953-1) - Two-wheeled trailer with optional
fender and light package. For highway use, consult
applicable federal, state, and local laws regarding
possible additional requirements. Choice of 2 hitches
and add on fender & light package. Order: K953-1
Trailer, K958-1 Ball Hitch, K958-2 Lunette Eye
Hitch, K959-1 Fender & Light Kit.
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc
welder for pipe thawing is not approved by the
CSA, nor is it recommended or supported by
Lincoln Electric.
------------------------------------------------------------------------
Wire Feed Module (K623-1) - Provides constant
voltage (CV) output with improved arc stability for
Innershield welding. Excellent for MIG welding.
Recommended wire feeders are the LN-7, LN-23P
and LN-25.
Spark Arrestor Kit (K903-1) - Includes a heavy gage
steel, approved spark arrestor, clamp and adapter for
mounting to the muffler exhaust pipe.
Oil Drain Kit (K1586-1) - Includes ball valve, hose
and clamp.
WARNING