DESIGNER IM649 User guide

3.2.2.2 TOOLS MENU
The Tools menu includes waveform display
options and other tools required to operate
Wave Designer. The Tools menu options
include the following:
Pulse Editor Ctrl+P
Display the Pulse Waveform Editor screen.
STT Editor Ctrl+E
Display the STT Waveform Editor screen.
Simplify Editor
Display the primary wave shaping parameters
only. (See page A-1.)
ArcScope Ctrl+A
(Wave Designer Pro option only)
Display the Scope Trace screen for the currently displayed waveform.
Flash Custom Waveform Ctrl+F
Transmit selected waveforms to the welding
machine. This option requires that the
equipment interconnections are made and
that the welding machine is on-line
(communicating).
Browse Mode Directory Ctrl+B
Display the Weld Mode Directory screen. The
Weld Mode Directory lists the waveforms that
are presently downloaded into the welding
machine controller memory. You can
download up to ten custom waveforms to the
weld mode directory, memory slots (Modes)
155 through 164.
Upgrade Firmware
Use this option when installing new firmware on your welding machine. The new firmware is
required to run this Wave Designer software release. When later software releases are issued,
they may or may not include firmware upgrades. If firmware upgrades are included, you will use
the Upgrade Firmware option to install the upgrades.
Go Offline
Use the Go Offline option to temporarily interrupt and re-establish communications between the
welding machine / wire feeder and Wave Designer.
Section 3 3-5
SOFTWARE OPERATION
WAVE DESIGNER
27850011
Wave Designer Pro Off Line - pulse.swf
Search Weld Mode Directory
Off Line
Upload from Machine
0% done
Stand by
Status
weldfile uploaded
Adaptive
File Tools Print Help
Search for:
Mode 12: NST3510C.SWG: Steel Pulse, .035 Steel, Argon CO2 Blends
Mode 20: N45ST00C.SWG: Mig 3, .045 Steel, CO2
Mode 21: N45ST10C.SWG: Mig 3, .045 Steel, Argon CO2 Blends
Mode 22: NST4510C.SWG: Steel Pulse, .045 Steel, Argon CO2 Blends
Mode 24: N52ST00C.SWG: Mig 3, .052 Steel, CO2
Mode 25: N52ST10C.SWG: Mig 3, .052 Steel, Argon CO2 Blends
Mode 26: NST5210C.SWG: Steel Pulse, .052 Steel, Argon CO2 Blends
Mode 31: N35SS02.SWG: Mig 3, .035 Stainless, Argon Oxy Blends
Mode 32: NSS3502.SWG: Stainless Pulse2, .035 Stainless, Argon Oxy Blends
Mode 41: N45SS02.SWG: Mig 3, .045 Stainless, Argon Oxy Blends
Mode 42: NSS4502.SWG: Stainless Pulse2, .045 Stainless, Argon Oxy Blends
Mode 71: N48AL43.SWG: MIG 1, 3/64 4043, 100% Argon
Mode 72: NAL4843.SWG: Aluminum Pulse, 3/64 4043, 100% ARGON
Mode 73: N62AL43.SWGL MIG 1, 1/16 4043, 100% Argon
Mode 74: NAL6243.SWG: Aluminum Pulse, 1/16 4043, 100% Argon
Mode 75: N48AL56.SWG: MIG 1, 3/64 5356, 100% Argon
Mode 76: NAL4856.SWG: Aluminum Pulse, 3/64 5356, 100% Argon
Mode 77: N62AL56.SWG: MIG 1, 1/16 5356, 100% Argon
Mode 78: NAL6256.SWG: Aluminum Pulse, 1/16 5356, 100% Argon
Mode 81: N45MC10C.SWG: FCAW_GS, .045 MC-710, Argon CO2 Blends
Mode 82: NMC4510C.SWG: Pulse Metal Core, .045 MC-710, Argon CO2 Blends
Mode 90: N45OS00C.SWG: FCAW_GS, .045 FCAW-GS, 100% CO2
Mode 91: N45OS20C.SWG: FCAW_GS, .045 FCAW-GS, Argon CO2 Blends
Mode 200: mode200.SWG: CC TEST USING WP, 25A-600A,
Mode 201: MODE201.SWG: CV TEST USING WP, 10V-35V,
Mode 202: MODE202.SWG: CC TEST, NO WP, FIXED AT 10A,
Mode 203: MODE203.SWG: CC TEST, NO WP, FIXED AT 355A,
Mode 204: MODE204.SWG: CC TEST, NO WP, FIXED AT 455A,
Mode 205: MODE205.SWG: CC TEST, NO WP, FIXED AT 550A,
Mode 206: MODE206.SWG: CV TEST, NO WP, FIXED AT 30V,
Search Browse All
Tools Print
Pulse Editor Ctrl+P
Ctrl+E
Ctrl+A
Ctrl+F
Ctrl+B
STT Editor
ArcScope
Flash Custom Waveform
Browse Mode Directory
Upgrade Firmware
Go Offline
27850010
Simplify Editor
Help