2014 NAVIGATOR 2014 NAVIGATOR O w n e r ’s M a n u a l lincolnowner.com EL7J 19A321 AA O w n e r ’s M a n u a l March 2014 Second Printing Owner’s Manual Lincoln Navigator Litho in U.S.A. lincolncanada.
Table of Contents 1 Introduction Child Safety Child seat positioning . Booster seats . . . . . . . Installing child seats . . Child safety locks . . . . 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 .19 .21 .24 .
2 Table of Contents Locks 67 Locking and unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 SecuriCode™ keyless entry keypad . . . . . . . . . . . . . . . . . . . . . . . . .75 Security 77 SecuriLock® passive anti-theft system. . . . . . . . . . . . . . . . . . . . . . .77 Anti-theft alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Steering Wheel 81 Adjusting the steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents 3 Instrument Cluster 100 Gauges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Warning lamps and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . .101 Audible warnings and indicators . . . . . . . . . . . . . . . . . . . . . . . . . .106 Information Displays 107 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 Information messages . . . . . . . . . . . . . . . . . . . . . . . .
4 Table of Contents Fuel and Refueling 163 Fuel quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164 Refueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 Fuel consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169 Transmission 174 Four-Wheel Drive (If Equipped) 179 Four wheel drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179 Brakes Brakes . . . . . . .
Table of Contents 5 Load Carrying 202 Roof racks and load carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202 Vehicle loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203 Cargo management system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 Towing 213 Trailer towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213 Wrecker towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Table of Contents Maintenance General information . . . . . . . . . . . Opening and closing the hood . . . . Under hood overview . . . . . . . . . . Engine oil dipstick . . . . . . . . . . . . Engine oil check . . . . . . . . . . . . . . Engine coolant check . . . . . . . . . . Automatic transmission fluid check Brake fluid check . . . . . . . . . . . . . Fuel filter. . . . . . . . . . . . . . . . . . . Washer fluid check . . . . . . . . . . . . Battery . . . . . . . . . . . . . . . . . . . .
Table of Contents Wheels and Tires Tire care . . . . . . . . . . . . . . . . . . . . . . . . Tire Pressure Monitoring System (TPMS) Changing a road wheel . . . . . . . . . . . . . . Technical specifications. . . . . . . . . . . . . . Wheel lug nut torque . . . . . . . . . . . . . . . Capacities and Specifications Engine specifications . . . . . . . Part numbers . . . . . . . . . . . . . Vehicle identification number . Vehicle certification label . . . . Transmission code designation. . . . . . . . . . .
8 Table of Contents Navigation System (If Equipped) Status bars. . . . . . . . . . . . . . . . . . . . . . . Loading pictures. . . . . . . . . . . . . . . . . . . Voice recognition . . . . . . . . . . . . . . . . . . Accessing media features . . . . . . . . . . . . Jukebox features . . . . . . . . . . . . . . . . . . Recording (saving) music to your jukebox Accessing the music in your jukebox . . . . Creating a playlist. . . . . . . . . . . . . . . . . . Where am I?. . . . . . . . . . . . . . . . . . . .
Introduction 9 ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it. WARNING: Always drive with due care and attention when using and operating the controls and features on your vehicle.
10 Introduction SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle.
Introduction Symbol Description Fuel pump reset Heated rear window Lighting control Panic alarm Power steering fluid Service engine soon Windshield defrost and demist Symbol Description Symbol Fuse compartment Interior luggage compartment release Low tire pressure warning Parking aid system Power windows front and rear Side airbag Windshield washer and wiper 2014 Navigator (nav) Owners Guide gf, 2nd Printing, February 2014 USA (fus) 11 Description Hazard warning flasher Jack Maintain correct fluid
12 Introduction DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems.
Introduction 13 Note: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driving conditions and no personal data or information (e.g., name, gender, age, and crash location) is recorded (see limitations regarding 911 Assist and Traffic, Directions and Information privacy below).
14 Introduction CALIFORNIA PROPOSITION 65 WARNING: Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. PERCHLORATE MATERIAL Note: Certain components in your vehicle, such as airbag modules, safety belt pretensioners, and remote control batteries, may contain perchlorate material.
Introduction 15 Collision Repairs We hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. During vehicle development, we validate that these parts deliver the intended level of protection as a whole system. A great way to know for sure you are getting this level of protection is to use genuine Ford replacement collision parts.
16 Introduction MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits.
Child Safety 17 GENERAL INFORMATION See the following sections for directions on how to properly use safety restraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle. Failure to follow these instructions and guidelines may result in an increased risk of serious injury or death to your child. WARNING: All children are shaped differently.
18 Child Safety Recommendations for Safety Restraints for Children Child size, height, weight, or Recommended age restraint type Infants or Children weighing 40 lb (18 kg) Use a child safety seat toddlers or less (generally age four or (sometimes called an younger). infant carrier, convertible seat, or toddler seat). Small Children who have outgrown or no Use a belt-positioning children longer properly fit in a child safety booster seat. seat (generally children who are less than 4 ft. 9 in. (1.
Child Safety 19 CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back. When possible, all children age 12 and under should be properly restrained in a rear seating position.
20 Child Safety WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. WARNING: To avoid risk of injury, do not leave children or pets unattended in your vehicle. Recommendations for attaching child safety restraints for children Use any attachment method as indicated below by X.
Child Safety 21 BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. Use a belt-positioning booster seat for children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 feet 9 inches (1.
22 Child Safety Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat. In this case, move the backless booster to another seating position with a higher seat back or head restraint and lap and shoulder belts, or consider using a high back booster seat.
Child Safety 23 Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder. The following drawings compare the ideal fit (center) to a shoulder belt uncomfortably close to the neck and a shoulder belt that could slip off the shoulder.
24 Child Safety INSTALLING CHILD SEATS Child Seats Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.
Child Safety 25 • Place the vehicle seat upon which the child seat will be installed in the upright position. • Put the safety belt in the automatic locking mode. See Step 5. This vehicle does not require the use of a locking clip. Perform the following steps when installing the child seat with combination lap and shoulder belts: Note: Although the child seat illustrated is a forward facing child seat, the steps are the same for installing a rear facing child seat. 1.
26 Child Safety 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it. 5. To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is pulled out. Note: The automatic locking mode is available on the front passenger and rear seats.
Child Safety 27 This is necessary to remove the remaining slack that will exist once the extra weight of the child is added to the child restraint. It also helps to achieve the proper snugness of the child seat to your vehicle. Sometimes, a slight lean toward the buckle will provide extra help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped). See Using Tether Straps in this chapter. 10.
28 Child Safety LATCH compatible child safety seats have two rigid or webbing mounted attachments that connect to the two lower anchors at the LATCH equipped seating positions in your vehicle. This type of attachment method eliminates the need to use safety belts to attach the child seat, however the safety belt can still be used to attach the child seat.
Child Safety 29 The locator symbols are on round plastic buttons for the center seat and on rectangular tags for the outboard seats. Follow the instructions on attaching child safety seats with tether straps. See Using Tether Straps in this chapter. Attach LATCH lower attachments of the child seat only to the anchors shown. Each time you use the safety seat, check that the seat is properly attached to the lower anchors and tether anchor, if applicable.
30 Child Safety Some of the rear seats of your vehicle are equipped with built-in tether strap anchors located behind the seats as described below. In the third row center seating position, the tether anchor is a loop at the bottom of the seat back. The tether strap anchors in your vehicle are in the following positions (shown from top view). • Second row bench seat • Second row bucket seats Attach the tether strap only to the appropriate tether anchor as shown.
Child Safety 31 Perform the following steps to install a child safety seat with tether anchors: Second row seating positions 1. For center seating positions, route the child safety seat tether strap over the back of the seat. For outboard seating positions, route the tether strap under the head restraint and between the head restraint posts. If the top of the safety seat hits the head restraint, recline the seat back slightly to obtain proper fit. 2.
32 Child Safety 3. Grasp the tether strap and position it to the seat frame. 4. Rotate the tether strap, and clip the tether strap to the anchor on the seat frame. 5. Rotate the tether strap clip. 6. Tighten the child safety seat tether strap according to the manufacturer’s instructions.
Child Safety Third row center seating position 1. Route the child safety seat tether strap over the back of the seat. 2. Locate the anchor webbing loop for the seating position. • You may need to pull back the top of the hinged panel along the bottom of the seat back to access the tether anchor.
34 Child Safety 3. Clip the tether strap through the anchor loop as shown. If the tether strap is clipped incorrectly, the child safety seat may not be retained properly in the event of a crash. 4. Tighten the child safety seat tether strap according to the manufacturer’s instructions. If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases.
Child Safety 35 CHILD SAFETY LOCKS When these locks are set, the rear doors cannot be opened from the inside. The childproof locks are located on the rear edge of each rear door and must be set separately for each door. Move the lock control up to engage the childproof lock. Move it down to disengage the lock.
36 Safety Belts PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a crash.
Safety Belts 37 WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a child anywhere near them.
38 Safety Belts FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. 2. To unfasten, press the release button and remove the tongue from the buckle.
Safety Belts 39 Pregnant women should always wear their safety belts. The lap belt portion of a combination lap and shoulder belt should be positioned low across the hips below the belly and worn as tight as comfort will allow. The shoulder belt should be positioned to cross the middle of the shoulder and the center of the chest.
40 Safety Belts Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions.
Safety Belts 41 SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a crash. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder. To adjust the shoulder belt height: 1. Squeeze the side release buttons and slide the height adjuster up or down. 2.
42 Safety Belts To adjust the comfort guide: 1. Slip the shoulder belt into the belt guide (the portion of the belt between the latch tongue and the D-ring, not the portion where the belt exits from the quarter trim panel). 2. Slide the guide up or down along the webbing so that the belt is centered on the occupant’s shoulder.
Safety Belts 43 SAFETY BELT-MINDER™ This feature supplements the safety belt warning function by providing additional reminders by intermittently sounding a chime and illuminating the safety belt warning light when the driver seat is occupied and the safety belt is unbuckled. If... The driver safety belt is buckled before the ignition switch is turned to the on position or less than 1-2 minutes have elapsed since the ignition switch has been turned to on...
44 Safety Belts Deactivating and Activating the Belt-Minder™ Feature WARNING: While the design allows you to deactivate your Belt-Minder, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the Belt-Minder system activated for yourself and others who may use the vehicle. To reduce the risk of injury, do not deactivate or activate the Belt-Minder feature while driving the vehicle.
Safety Belts 45 CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child seat safety belts to make sure there are no nicks, tears or cuts. Replace if necessary.
46 Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.
Supplementary Restraints System 47 WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash. The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.
48 Supplementary Restraints System Your vehicle’s Restraint Safety System consists of: • Driver and passenger dual-stage airbag supplemental restraints. • Front outboard safety belts with pretensioners, energy management retractors (first row only), and safety belt usage sensors. • Driver’s seat position sensor. • Front crash severity sensors. • Restraints control module with impact and safing sensors. • Restraint system warning light and backup tone.
Supplementary Restraints System 49 DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury. WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag.
50 Supplementary Restraints System Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbag module. Failure to follow this could seriously increase the risk of injury or death. To properly position yourself away from the airbag: • Move your seat to the rear as far as you can while still reaching the pedals comfortably.
Supplementary Restraints System 51 SIDE AIRBAGS WARNING: Do not place objects or mount equipment on or near the airbag cover, on the side of the seat backs (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash. WARNING: Do not use accessory seat covers.
52 Supplementary Restraints System The system consists of the following: • A label or embossed side panel indicating that side airbags are found on your vehicle. • Side airbags located inside the seat back of the driver and front passenger seats. • Crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag Indicator later in this chapter.
Supplementary Restraints System 53 WARNING: All occupants of your vehicle including the driver should always wear their safety belts even when an airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death. WARNING: To reduce risk of injury, do not obstruct or place objects in the deployment path of the curtain airbag.
54 Supplementary Restraints System Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.
Supplementary Restraints System 55 If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash.
56 Keys and Remote Control GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Keys and Remote Control 57 REMOTE CONTROL Integrated Keyhead Transmitters Your vehicle may be equipped with two integrated keyhead transmitters. The key blade is used to start the vehicle and unlock or lock the driver’s door from outside the vehicle. The transmitter portion functions as the remote control. Note: Your vehicle’s keys were issued with a security label that provides important vehicle key cut information. Keep the label in a safe place for future reference.
58 Keys and Remote Control Integrated Keyhead Transmitter 1. Twist a thin coin in the slot near the key 1 ring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2) 2 from the transmitter if it does not come off with the battery cover. 3 3. Remove the old battery (3). 4. Insert the new battery. Refer to the instructions inside the integrated keyhead transmitter for the correct orientation of the battery.
Keys and Remote Control 1 2 59 3. Press and hold memory button 1 on the side of the driver seat for five seconds. You will hear two tones. 4. Within three seconds press the lock button on the remote control. Repeat this procedure for memory button 2 and a second remote control if desired. Deactivating Memory from the Remote Control 1. Switch on the ignition. 2. Press and hold the desired memory button for five seconds. You will hear two tones. 3.
60 MyKey PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. You can use all but one of the keys programmed to your vehicle with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys. These can be used to: • create a restricted key • program optional MyKey settings • clear all MyKey features.
MyKey 61 • Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. • Always on setting. When this is selected, you will not be able to turn off AdvanceTrac (if your vehicle is equipped with this feature). CREATING A MYKEY Use the information display to create a MyKey. 1. Insert the key you want to program into the ignition. 2. Switch the ignition on. 3.
62 MyKey CLEARING ALL MYKEYS You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys. Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once. To clear all MyKeys of all MyKey settings, use the information display to do the following: 1. Press SETUP until you see PRESS RESET TO CLEAR MYKEY in the display. 2.
MyKey 63 USING MYKEY WITH REMOTE START SYSTEMS MyKey is not compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see your Ford authorized dealer for a Ford-approved remote start system. Vehicles With Ford-approved Aftermarket Remote Start Systems When using a Ford-approved aftermarket remote start system, the vehicle recognizes the remote start system as an additional admin key. It is the vehicle’s default setting.
64 MyKey Vehicles With Non-Ford-approved Aftermarket Remote Start Systems MyKey is not compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see a Ford authorized dealer for a Ford-approved system. The following information may help customers who choose to install a non-Ford-approved remote start system.
MyKey 65 MYKEY TROUBLESHOOTING Condition I cannot create a MyKey. I cannot program the configurable settings. I cannot clear the MyKeys. I lost the only admin key. I lost a key. Potential causes • The key to start the vehicle does not have admin privileges. • The key used to start the vehicle is the only admin key (there always has to be at least one admin key). • SecuriLock passive anti-theft system is disabled or in unlimited mode.
66 MyKey Condition I accidentally programmed all keys as MyKeys. Potential causes • The vehicle has a remote start system that is recognized as an admin key. Clear all MyKeys by using remote start. See Using MyKey With Remote Start Systems. • Your vehicle’s system does not recognize any MyKeys. See Creating a MyKey. MyKey total includes • An unknown key has been created as a one additional key. MyKey. • The vehicle has a remote start system. See Using MyKey With Remote Start Systems.
Locks 67 LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A. Unlock B. Lock A B Remote Control You can use the remote control anytime your vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Press the button to unlock the driver’s door. Press the button again within three seconds to unlock all doors.
68 Locks Power Liftgate WARNING: Make sure all persons are clear of the liftgate area before using power liftgate control. WARNING: Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury.
Locks 69 • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 12 mph (20 km/h). If the vehicle was autolocked, the autounlock feature will unlock all doors when the driver’s door is opened within 10 minutes of switching the ignition off. Enabling or Disabling Autolock and Autounlock These features can be enabled or disabled: • by your authorized dealer • through the information display • using the power door lock procedure.
70 Locks Illuminated Entry The interior lamps and parking lamps illuminate when the remote entry system is used to unlock the door(s). The system will turn off the lights if: • the ignition is turned on • the lock button on the remote control is pressed • the vehicle is locked using the keyless entry keypad • after 25 seconds of illumination. The dome lamp control (if equipped) must not be set to the off position for the illuminated entry system to operate.
Locks 71 Power Liftgate WARNING: Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury. WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control.
72 Locks If the liftgate reverses and starts to close after a open request, a fast continuous chime indicates excessive load on the liftgate or a possible strut failure. If any excessive load is removed and you still have a faster chime, have the system serviced immediately by your authorized dealer. Do not attempt to manually force the liftgate to travel faster than the power system will permit. This will activate the obstacle detection feature.
Locks 73 Press and release the control on the left rear quarter panel. A chime will beep once if conditions are not correct to start an operation (i.e., the vehicle is out of park). In a normal close, the chime will begin just before the gate starts to move and continue for a total of three seconds. To manually operate the liftgate: Note: Manual operation is suggested on extreme inclines or in extreme cold -40°F (-40°C).
74 Locks Resetting the Power Liftgate If any of these conditions occur, the power liftgate may not operate and must be reset: • A low voltage or dead battery • Disconnected battery • The liftgate is manually closed and left ajar (unlatched) To reset the power liftgate: 1. Disconnect the battery for 20 seconds then, reconnect the battery. 2. Manually close and fully latch the liftgate. 3. Power open the liftgate by using the remote entry transmitter or instrument panel button.
Locks 75 SECURICODE™ KEYLESS ENTRY KEYPAD You can use the keyless entry keypad to lock or unlock the doors or release the liftgate glass without using a key. The keypad can be operated with the factory-set 5-digit entry code; this code is located on the owner’s wallet card in the glove box and is available from your authorized dealer. You can also create up to five of your own 5-digit personal entry codes. Programming a Personal Entry Code You can store up to three personal entry codes.
76 Locks Programming Memory to a Personal Entry Code To program a personal entry code to recall a driver memory setting, repeat Steps 1–4 above. • Pressing 1•2 on the keypad in Step 4 will program the code to driver memory setting 1. • Pressing 3•4 in Step 4 will program the code to driver memory setting 2. Note: Pressing 5•6, 7•8, or 9•0 keypad numbers in Step 4 will not program the code to recall a driver memory setting. Note: The factory-set code cannot be associated with a memory setting.
Security 77 SECURILOCK® PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting your vehicle. Prevent these objects from touching the coded key while starting the engine.
78 Security Automatic Disarming Your vehicle disarms when you switch the ignition on with a coded key. Replacement Keys Note: Your vehicle may come with two integrated keyhead transmitters. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts the vehicle, as well as a remote control.
Security 79 5. Turn the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds. 6. Turn the ignition off and remove the second previously programmed coded key from the ignition. 7. After three seconds but within 20 seconds of turning the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition. 8. Turn the ignition from off to on. Keep the ignition on for at least six seconds. 9.
80 Security Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armed mode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. • Turn the ignition on with a valid key. • Press the panic button on the remote control. The alarm system will still be armed, but this shuts off the horn and turn lamps when the alarm is sounding.
Steering Wheel 81 ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting in the Correct Position in the Seats chapter. Use the control on the side of the steering column to tilt the position. Memory Feature The steering column positions are saved and recalled with the memory feature. Refer to the Seats chapter.
82 Steering Wheel AUDIO CONTROL E - VOL + D A B MEDIA C A. Volume up B. Seek up or next C. Media D. Seek down or previous E. Volume down OK Media Press the media button repeatedly to scroll through available audio modes. Seek, Next or Previous Press the seek button to: • tune the radio to the next or previous stored preset • play the next or previous track. Press and hold the seek button to: • tune the radio to the next station up or down the frequency band • seek through a track.
Steering Wheel VOICE CONTROL (IF EQUIPPED) A. Voice recognition B. Phone mode C. Confirm selection See the SYNC or Navigation System chapter. - VOL + A MEDIA B OK C CRUISE CONTROL See the Cruise Control chapter.
84 Pedals ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located to the left of the steering column. Press and hold the appropriate control to move the pedals. A. Closer B. Farther A B The pedal positions are saved and recalled with the memory feature (if equipped). Refer to the Seats chapter. The pedals should only be adjusted when the vehicle is parked.
Wipers and Washers 85 WINDSHIELD WIPERS Note: Fully defrost the windshield before turning on the windshield wipers. Note: Make sure the windshield wipers are turned off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades. Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to bun out.
86 Wipers and Washers Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washer before wiping a dry windshield. Note: Do not operate the washer when the washer reservoir is empty.
Lighting 87 LIGHTING CONTROL Rotate the control clockwise to the first position to turn on the parking lamps. Rotate the control clockwise to the second position to turn on the headlamps. Rotate the control to the vertical position to turn the headlamps off. High Beams 0 2 1 • Push the lever toward the instrument panel to switch on the high beams. • Pull the lever toward you to switch of the high beams. Headlamp Flasher Pull the lever toward you slightly and release it to flash the headlamps.
88 Lighting AUTOLAMPS The autolamp system provides light sensitive automatic on/off control of the exterior lights normally controlled by the headlamp control. The autolamp system also keeps the lights on for approximately 20 seconds or, if equipped with a message center, you can select a delay from 0–180 seconds after the ignition switch is turned off. See Message center in the Instrument Cluster chapter. • To turn autolamps on, rotate the control counterclockwise one position.
Lighting 89 DAYTIME RUNNING LAMPS (DRL) (IF EQUIPPED) WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision. Turns the fog lamps on at full intensity output.
90 Lighting INTERIOR LAMPS Front Row Map Lamps To turn on the map lamps, press the outer edge of the clear lens. The front row map lamp lights when: • any door is opened. • the instrument panel dimmer switch is rotated until the courtesy lamps come on. • the remote entry controls are pressed and the ignition is off. Second Row Map Lamps The second row map lamps are located in the headliner above the second row seats.
Lighting 91 Rear Cargo Lamp The rear cargo lamp lights when: • any door is opened, and the switch is in the middle position. • the instrument panel dimmer switch is rotated until the courtesy lamps come on. • any of the remote entry controls are pressed and ignition is off (and switch is in the middle position). With the ignition key in the accessory or on position, the rear cargo lamp can be turned on or off by sliding the control.
92 Windows and Mirrors POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings. Note: You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise.
Windows and Mirrors 93 Pull up the window switch and hold within two seconds of the window reaching the bounce-back position. The window will travel up with no bounce-back protection. The window will stop if your release the switch before the window is fully closed. Window Lock A. Unlock B. Lock A B Press the control to lock or unlock the rear window controls. Accessory Delay You can use the window switches for several minutes after you switch the ignition off, or until you open either front door.
94 Windows and Mirrors Power-Folding Mirrors Note: Activating the mirrors 10 or more times within one minute, or repeated folding and unfolding of the mirrors while holding the control down during full travel, may disable the system to protect motors from overheating. Wait approximately three minutes with the vehicle running, and up to 10 minutes with the vehicle off, for the system to reset and for function to return to normal. Pull the control back to fold the mirrors in or out.
Windows and Mirrors 95 Integrated Blind Spot Mirrors WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors. They are designed to assist you by increasing visibility along the side of your vehicle. Check the main mirror first before a lane change, then check the blind spot mirror.
96 Windows and Mirrors INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point. This lets you move the mirror head up or down and from side to side. Auto-Dimming Mirror Note: Do not block the sensors on the front and back of the mirror.
Windows and Mirrors 97 REAR QUARTER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power rear quarter windows. They may seriously injure themselves. WARNING: When closing the power rear quarter windows, you should verify that it is free of obstructions and ensure that children and/or pets are not in the proximity of the window opening. Press and hold the VENT control to open the windows. Pull and hold the VENT control to close the windows.
98 Windows and Mirrors Illuminated Visor Vanity Mirror Lift the cover to switch on the lamp. MOONROOF (IF EQUIPPED) WARNING: Do not let children play with the moonroof or leave children unattended in the vehicle. They may seriously hurt themselves. WARNING: When closing the moonroof, you should verify that it is free of obstructions and ensure that children and/or pets are not in the proximity of the moonroof opening. The sliding shade can be manually opened or closed when the moonroof is closed.
Windows and Mirrors 99 Opening and Closing the Moonroof Press and release the SLIDE control to open the moonroof. The moonroof will stop short of the fully opened position. Note: This position helps to reduce rumbling wind noise which may happen with the moonroof fully open. Press and release the control again to fully open the moonroof. Pull and release the SLIDE control to close the moonroof.
100 Instrument Cluster GAUGES A G B C D F E Cluster shown in standard measure. Metric similar. A. Battery voltage gauge B. Fuel gauge C. Engine coolant temperature gauge D. Engine oil pressure gauge E. Speedometer F. Information display. See Information displays for more information. G. Tachometer Battery Voltage Gauge Indicates the battery voltage when the ignition is in the on position.
Instrument Cluster 101 Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on). The fuel gauge may vary slightly when the vehicle is in motion or on a grade. The fuel icon and arrow indicates which side of the vehicle the fuel filler door is located. Engine Coolant Temperature Gauge Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range.
102 Instrument Cluster Airbag – Front If it fails to illuminate on startup, continues to flash or remains on, it indicates a malfunction. Have the system checked by your authorized dealer. A chime will sound when there is a malfunction in the indicator light. Anti-Lock Braking System If it illuminates when you are driving, this indicates a malfunction. You will continue to have the normal braking system (without ABS) unless the brake warning lamp is also illuminated.
Instrument Cluster 103 Check 4X4 Displays with the message CHECK 4X4 when a four-wheel drive fault is present. Refer to the Information Displays chapter for more information. Cruise Control It will illuminate when you switch this feature on. Direction Indicator Illuminates when the left or right turn signal or the hazard warning flasher is switched on. If the indicators stay on or flash faster, check for a burned out bulb. Door Ajar Displays when the ignition is on and any door is not completely closed.
104 Instrument Cluster Low Fuel Level It will illuminate when the fuel level is low or near empty. Refuel as soon as possible. Low Tire Pressure Warning It will illuminate when your tire pressure is low. If the lamp remains on with the engine running or when driving, check your tire pressure as soon as possible. The lamp also illuminates momentarily when you switch the ignition on to confirm the lamp is functional.
Instrument Cluster 105 Solid illumination after the engine is started indicates the on-board diagnostics system (OBD-II) has detected a malfunction. Refer to On-board diagnostics (OBD-II) in the Fuel and Refueling chapter. If the light is blinking, engine misfire is occurring which could damage your catalytic converter. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced immediately by your authorized dealer.
106 Instrument Cluster AUDIBLE WARNINGS AND INDICATORS Key In Ignition Warning Chime Sounds when the key is left in the ignition in the off or accessory position and the driver’s door is opened. Headlamps On Warning Chime Sounds when the headlamps or parking lamps are on, the ignition is off (the key is not in the ignition) and the driver’s door is opened. Parking Brake On Warning Chime Sounds when you have left the parking brake on and drive your vehicle.
Information Displays 107 GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any handheld device while driving and encourage the use of voice-operated systems when possible.
108 Information Displays INFO MPG (L/km) TBC GAIN = XX.X (if equipped) TIMER • TRIP A/B: Registers the distance of individual journeys. Press and release INFO button until the A or B trip appears in the display (this represents the trip mode). Press the RESET button to reset. Refer to UNITS later in this section to switch the display from metric to English. • MYKEY MILES (km) (if programmed): For more information, refer to the MyKey® chapter.
Information Displays 109 System Check and Vehicle Feature Customization Press the SETUP button repeatedly to cycle the message center through the following features: INFO SETUP RESET FOR SYSTEM CHECK RESET SETUP press the OIL LIFE RESET button CHARGING SYSTEM WASHER FLUID LEVEL DOOR AJAR STATUS LIFTGATE/GLASS AJAR STATUS BRAKE SYSTEM MYKEY MILES (if programmed) MYKEY(S) PROGRAMMED ADMIN KEYS PROGRAMMED MILES TO EMPTY TBC GAIN = XX.
110 Information Displays SETUP UNITS press the English or Metric RESET button 0 to 180 seconds AUTOLAMP (SEC) AUTOLOCK On or Off AUTOUNLOCK On or Off RUNNING BOARDS Auto / Off / Out (if equipped) POWER LIFTGATE On or Off (if equipped) EASY ENTRY On or Off REAR PARK AID On or Off (if equipped) FRONT PARK AID On or Off (if equipped) TRAILER SWAY On or Off (if equipped) TBC MODE (if equipped) CREATE MYKEY / MYKEY SETUP / CLEAR MYKEY COMPASS ENGLISH / FRENCH / press the English / Spanish / French SPANISH RESE
Information Displays 111 To reset the oil monitoring system to 100% after each oil change, perform the following: 1. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”. 2. Press and hold the RESET button for two seconds and release to reset the oil life to 100%. Note: To change oil life 100% value (if equipped with this feature) to another value, proceed to Step 3. 3.
112 Information Displays • EASY ENTRY / EXIT: This feature automatically moves the driver’s seat rearward and adjusts the steering column for easy exit/entry from the vehicle. • REAR PARK AID (if equipped): This feature sounds a tone to warn the driver of obstacles near the rear bumper, and functions only when R (Reverse) gear is selected. • FRONT PARK AID (if equipped): This feature sounds a warning tone to warn the driver of obstacles near the front bumper.
Information Displays 113 6. Press and release the RESET button repeatedly until the correct zone setting for your geographic location is displayed on the message center. 7. Press and release SETUP and allow the setup timer to expire to exit the procedure or press INFO to exit. Compass calibration adjustment Note: For optimum calibration, drive to an open, level location away from large metallic objects or structures.
114 Information Displays AdvanceTrac® / Traction Control Messages SERVICE ADVANCETRAC Battery and Charging System Messages CHECK CHARGING SYSTEM Brake System Messages BRAKE FLUID LEVEL LOW Action / Description Displayed when the AdvanceTrac® system has detected a condition that requires service. Contact your authorized dealer as soon as possible. Action / Description Displayed when the charging system needs servicing.
Information Displays Fuel Messages CHECK FUEL FILL INLET XXX MILES TO E FUEL LEVEL LOW Maintenance Messages ENGINE OIL CHANGE SOON OIL CHANGE REQUIRED WASHER FLUID LEVEL LOW MyKey® Messages MYKEY ACTIVE DRIVE SAFELY VEHICLE NEAR TOP SPEED 115 Action / Description Displayed when the fuel fill inlet may not be properly closed. Displayed as an early reminder of a low fuel condition. Action / Description Displayed when the engine oil life is nearing its end. Displayed when the oil life left reaches 0%.
116 Information Displays MyKey® Messages CHECK SPEED DRIVE SAFELY BUCKLE UP TO UNMUTE AUDIO KEY COULD NOT PROGRAM ADVTRAC ON MYKEY SETTING Action / Description Displayed when a MyKey® is in use and the optional setting is on and the vehicle exceeds a preselected speed. Displayed when a MyKey® is in use and Belt-Minder® is activated. Displayed when an attempt is made to program a spare key using two existing MyKeys.
Information Displays 117 Trailer Messages TRAILER SWAY REDUCE SPEED Action / Description Displayed when the trailer sway control has detected trailer sway. 4WD Messages 4X4 SHIFT IN PROGRESS Action / Description Displayed when the 4X4 system is making a shift. CLOCK Press A to move the time display backwards. Press B to move the time display forwards.
118 Climate Control DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM WITHOUT HEATED AND COOLED SEATS A B C D AUTO R E F R OFF R R EXT REAR Q G A/C F P N M L O K J R I H A. AUTO: Press to turn on fully automatic operation. Select the desired temperature using the temperature control. The system automatically determines fan speed, air distribution, air conditioning operation, and outside or recirculated air, to heat or cool the vehicle to maintain the selected temperature. B.
Climate Control 119 When this button is pressed, the display only shows the rear temperature setting. After the rear setting changes are completed on the front control, the display automatically shows both climate settings. F. Passenger temperature control: Press and turn to increase or decrease the air temperature on the passenger side of the vehicle. G. Rear defrost: Press to turn the heated windows and mirrors off and on. See Heated windows and mirrors later in this chapter for more information. H.
120 Climate Control DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM WITH HEATED AND COOLED SEATS A B C D E AUTO R F G R OFF R R A/C EXT Q H REAR F P O N M L R K J I A. AUTO: Press to turn on fully automatic operation. Select the desired temperature using the temperature control. The system automatically determines fan speed, air distribution, air conditioning operation, and outside or recirculated air, to heat or cool the vehicle to maintain the selected temperature. B.
Climate Control 121 only the center rear temperature bar is lit. The rear temperature is different from the front temperature when more than one rear temperature bar is lit. When this button is pressed, the display only shows the rear temperature setting. After the rear setting changes are completed on the front control, the display automatically shows both climate settings. G. Passenger temperature control: Press and turn to increase or decrease the air temperature on the passenger side of the vehicle.
122 Climate Control N. Driver heated seat control: Press to switch the driver heated seat off and on. See Heated seats in the Seats chapter for more information. O. Driver cooled seat control: Press to switch the driver cooled seat off and on. See Heated and cooled seats in the Seats chapter for more information. P. Front fan speed control: Controls the volume of air circulated in your vehicle. Press to increase or decrease fan speed. Q. OFF: Turn the climate control system off.
Climate Control 123 GENERAL OPERATING TIPS • To reduce fog build-up on the windshield during humid weather, select Defrost. Temperature and fan speed can also be increased to improve clearing. • To reduce humidity build-up inside the vehicle, do not drive with the system off or with recirculated air engaged. • Do not put objects under the front seats that will interfere with the airflow to the back seats. • Remove any snow, ice or leaves from the air intake area at the base of the windshield.
124 Climate Control HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The vehicle must be running to use this feature. Press the control to clear the rear window of thin ice and fog. Press the control again within 15 minutes to switch it off. It turns off automatically after approximately 15 minutes, or when you switch off the ignition. Do not use razor blades or other sharp objects to clean the inside of the rear window or to remove decals from the inside of the rear window.
Seats 125 SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seatback, with your feet on the floor. WARNING: Do not recline the seatback as this can cause the occupant to slide under the seat’s safety belt, resulting in severe personal injury in the event of a crash.
126 Seats HEAD RESTRAINTS WARNING: To minimize the risk of neck injury in the event of a crash, you and the passenger occupants should not sit in or operate the vehicle, until the head restraint is placed in its proper position. Never adjust the head restraint while the vehicle is in motion. WARNING: The adjustable head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied.
Seats 127 3. Pull up the head restraint. Reinstall Align the steel stems into the guide sleeves and push the head restraint down until it locks. Second row outboard seat head restraints – The outboard head restraints are non-adjustable, but you can fold them. The non-adjustable head restraints consist of: A • A trimmed energy absorbing foam and structure (A). • A fold strap (B). B 1. Pull the fold strap to fold the outboard head restraint. 2.
128 Seats POWER SEATS WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. WARNING: Never adjust the driver seat or seatback when the vehicle is moving. The control is located on the outboard side of the seat. Move the switch in the direction of the arrow to raise or lower the seat cushion or to move the seat forward, backward, up or down. Power Recline Move the switch to recline the seat back forward or rearward.
Seats 129 Power Lumbar The control is located on the outboard side of the seat. Press the forward or rearward side of the control for more or less support. MEMORY FUNCTION This feature will save and recall the positions of the driver seat, power mirrors, adjustable pedals, and steering column. The memory seat control is located on left side of the driver’s seat. 1 2 Programming Memory Positions 1. Turn the ignition on. 2.
130 Seats Recalling Saved Memory Positions To recall position 1 settings, press and release memory button 1. The memory features will move to the saved memory 1 position. You can also recall the memory positions when you: • Press your remote control transmitter unlock button (if the remote control is programmed to a memory position) or, • Enter a valid Securicode personal entry code that is programmed to a memory position.
Seats 131 Climate Controlled Seats (If Equipped) Heated Seats WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
132 Seats Heated and Cooled Seats Air Filter Replacement (If Equipped) The heated and cooled seat system includes air filters. You must replace them periodically. See scheduled maintenance information for more information. There is a filter located under each front seat. You can access the filter from the second row seat. Move the front seats all the way forward and up to ease access. To remove a filter: 1. Remove the key from the ignition. 2.
Seats 133 REAR SEATS Folding Down the Second Row 40% Seat System WARNING: Use caution when folding the seatback to the flat back position as the system will move forward when you lift the release handle. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, pull on the seatback to make sure that it has fully latched.
134 Seats To return the seat to the upright position: 1. Lift the seatback toward the rear of the vehicle. 2. Rotate the seatback until you hear a click, locking it in the upright position. 3. Lift up on the head restraint until it locks into its original position. Placing the Second Row Outboard 40% Seats in Cargo Mode WARNING: Use caution when folding the seatback to the flat back position as the system will move forward when you lift the release handle.
Seats 135 To place the seats in the cargo mode: 1. Fold down the second row seat. 2. Pull the cargo mode lever up to release the seat into a kneel down load floor position. Returning to the upright position from full lowered load floor position You cannot return the seatback to the upright position until the seat is returned from the kneel down position. To return the seat to the upright position: 1. Push the seat rearward until the latch is engaged. 2. Return the seatback to the upright position.
136 Seats Adjusting the Second Row Outboard 40% Seat for E-Z Entry WARNING: Always latch the vehicle seat to the floor, whether the seat is occupied or empty. If not latched, the seat may cause injury during a sudden stop. WARNING: After using the E-Z Entry feature make sure there are not any objects, cargo or the feet of a third row occupant under the second row seat when latching the seat to the floor. Injury to the third row occupants feet or damage to the seat may occur.
Seats 137 To return the seat to a seating position: 1. Push the seat down and latch to the floor. 2. Bring the seatback to an upright position. The seatback should lock into position. Note: If the seatback will not return to the upright position, tumble the seat again and re-latch it to the floor. Be sure that cargo or other objects are not trapped underneath the seatback. Note: If a squeak is heard from the latch area, the latch striker pin should be wiped clean of dust or debris.
138 Seats Reclining the Second-Row Outboard 40% Seat Back WARNING: Reclining the seat back can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a crash. The release handle is located on the outboard side of the seat cushion. Lift it to allow the seat back to be adjusted to the desired location.
Seats 139 2. With the latch released the seatback can be lowered into the load floor position. 3. To return the seat to the upright position, lift the seat back until the latch is fully engaged. Adjusting the Second-Row Center 20% Seat (If Equipped) Note: Move this seat forward to keep a child in a child restraint close to the front seat occupants. Move the seat to the full rearward position when it is occupied by older children or adults, including children in booster seats.
140 Seats Rear Heated Seats (If Equipped) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
Seats 141 Folding Down the Third Row Seats to the Load Floor WARNING: To prevent possible damage to the seat or safety belts, make sure that the safety belts are not buckled when moving the seat to the load floor position. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seat back to its original position, pull on the seatback to make sure that it has fully latched.
142 Seats PowerFold™ Third-Row Seat (If Equipped) Note: The power fold down seats will operate for 10 minutes after the ignition switch is in off. The transmission must be in park (P) and the liftgate, or liftgate glass must be open. Similar to the battery saver feature, the power third row seat will be disabled 10 minutes after turning the vehicle off. Note: Be sure that the head restraints are folded down before powering the third row seat down.
Universal Garage Door Opener (If Equipped) 143 UNIVERSAL GARAGE DOOR OPENER The appearance of your vehicle’s universal garage door opener will vary according to your option package. Before programing, make sure you identify which transmitter you have by comparing it to the graphics below. HomeLink® Car2U® Home Automation System Note: The programming of the two types of universal garage door openers are different and have different instructions.
144 Universal Garage Door Opener (If Equipped) Note: Before you begin the programming process, park your vehicle in front of the garage door opener motor or other device you want to program. Note: Make sure you keep the original remote control transmitter for use in other vehicles as well as for future system programming. Note: We recommend that upon the sale or lease termination of your vehicle, you erase the programmed function buttons for security reasons.
Universal Garage Door Opener (If Equipped) 145 Rolling Code Programming Note: If you do not follow the time-sensitive instructions, the device will time out and you will have to repeat the complete procedure. Note: It may be helpful to have another person assist you in programming the transmitter. 1. Switch the ignition on. 2. Press and hold the outer two buttons for 1–2 seconds, then release. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens.
146 Universal Garage Door Opener (If Equipped) Fixed Code Programming Note: It may be helpful to have another person assist you in programming the transmitter. To program units with fixed code DIP switches, you will need the garage door hand-held transmitter, paper and a pen or pencil. 1. Switch the ignition on. 2. Open the battery cover and note all the switch settings from left to right. When the switch is in the up, on, or + position, mark down “left button”.
Universal Garage Door Opener (If Equipped) 147 7. When the garage door moves, release the button within one second. When the button is released, the LED lamp will flash slowly. 8. The LED lamp will begin to flash rapidly until programming is complete. If your garage door does not operate, repeat the previous steps. Otherwise, call the toll-free help line at 1-866-572-2728. The LED lamp above the selected button will illuminate to confirm that the system is responding to the button command.
148 Universal Garage Door Opener (If Equipped) Note: Make sure you keep the original remote control transmitter for use in other vehicles as well as for future system programming. Note: We recommend that upon the sale or lease termination of your vehicle, you erase the programmed function buttons for security reasons. See Erasing the function button codes later in this section. Note: You can program a maximum of three devices.
Universal Garage Door Opener (If Equipped) 149 rapidly. When the indicator light flashes rapidly, both buttons may be released. The rapid flashing indicates successful training. 4. Press and hold the HomeLink button you programmed for five seconds, then release. You may need to do this twice to activate the door. If your garage door does not operate, watch the HomeLink indicator light. If the indicator light stays on, the programming is complete.
150 Universal Garage Door Opener (If Equipped) Erasing the Function Button Codes Note: You cannot erase individual buttons. 1. Press and hold the outer two function buttons simultaneously for approximately 20 seconds until the indicator lights above the buttons flash rapidly. 2. When the indicator lights flash, release the buttons. The codes for all buttons are erased. Reprogramming a single button To program a device to a previously trained button, follow these steps: 1. Press and hold the desired button.
Universal Garage Door Opener (If Equipped) 151 2. Press the same button twice to confirm the change to Programming mode. If done properly the LED light will appear red. 3. Hold the transmitter within 1–3 inches (2–8 centimeters) of the button on the sun visor you want to program. 4. Press and hold both the programmed Genie button on the hand-held transmitter and the button on the sun visor you want to program. The indicator light on the sun visor will flash rapidly when the programming is successful.
152 Universal Garage Door Opener (If Equipped) Note: The next two steps must be completed in 30 seconds. 4. Press and release the Genie Intellicode 2 hand-held transmitter’s previously programmed button. Both indicator lights on the garage door opener motor unit should now flash purple. 5. Press and hold the previously programmed button on the sun visor for two seconds. Repeat this step up to 3 times until the garage door moves. Programming is now complete.
Auxiliary Power Points 153 AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fire or serious injury. Note: If used when the engine is not running, the battery will discharge. There may be insufficient power to restart your engine. Note: Do not insert objects other than an accessory plug into the power point.
154 Auxiliary Power Points Locations Power points may be found: • By the passenger’s ankle near the floor on the front console. • In the console bin. • On the rear of the center console. • On the right rear quarter panel. 110 Volt AC Power Point (If Equipped) WARNING: Do not keep electrical devices plugged in the power point whenever the device is not in use. Do not use any extension cord with the 110 volt AC power point, since it will defeat the safety protection design.
Auxiliary Power Points 155 The power point is not designed for the following electric appliances; they may not work properly: • Cathode-ray, tube-type televisions • Motor loads, such as vacuum cleaners, electric saws and other electric power tools, compressor-driven refrigerators, etc. • Measuring devices that process precise data, such as medical equipment, measuring equipment, etc.
156 Storage Compartments CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. Available console features include: A. Cupholders A B. Utility compartment, coin holder B slots, tissue box holder, audio input jack and USB port E C. Power point, rear climate controls, rear audio controls, rear D heated seat controls and 110-volt AC power point C D. Rear cupholders E.
Starting and Stopping the Engine 157 GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Do not start your vehicle in a closed garage or in other enclosed areas.
158 Starting and Stopping the Engine IGNITION SWITCH Note: Do not store the key in the ignition after the vehicle is turned off and you have left the vehicle. This could cause a drain on the battery. C B D A A. Off: The ignition is off. B. Accessory: Allows the electrical accessories, such as the radio, to operate while the engine is not running. C. On: All the electrical circuits are operational. Warning lights are illuminated. This is the key position when driving. D. Start: Cranks the engine.
Starting and Stopping the Engine 159 Note: Do not touch the accelerator pedal. 1. Fully press the brake pedal. 2. Turn the key to the start position to start the engine. Release the key when the engine starts. Note: The engine may continue cranking for up to 15 seconds or until it starts. Note: If you cannot start the engine on the first try, wait for a short period and try again.
160 Starting and Stopping the Engine Cold Weather Starting (Flexible Fuel Vehicles Only) The starting characteristics of all grades of E-85 ethanol make it unsuitable for use when ambient temperatures fall below 0°F (-18°C). Consult your fuel distributor for the availability of winter grade ethanol. As the outside temperature approaches freezing, ethanol fuel distributors should supply winter grade ethanol (same as with unleaded gasoline).
Starting and Stopping the Engine 161 Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Take precautions to avoid its dangerous effects. Important Ventilating Information If you stop your vehicle and leave the engine idling for long periods, we recommend that you do one of the following: • Open the windows at least 1 inch (2.5 centimeters).
162 Starting and Stopping the Engine We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified by Underwriter’s Laboratory or Canadian Standards Association. This extension cord must be suitable for use outdoors, in cold temperatures, and be clearly marked Suitable for Use with Outdoor Appliances. Never use an indoor extension cord outdoors; it could result in an electric shock or become a fire hazard.
Fuel and Refueling 163 SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury. WARNING: Automotive fuels can cause serious injury or death if misused or mishandled.
164 Fuel and Refueling • Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kind can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of fuel vapor can cause serious illness and permanent injury. • Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury.
Fuel and Refueling 165 Note: Use of any fuel other than recommended fuel can cause powertrain damage, impair the emission control system or cause loss of vehicle performance. Any damage to the vehicle that is caused by the use of fuel not recommended will not be covered under warranty. Choosing the Right Fuel With a Flex Fuel Vehicle (If Equipped) Use only UNLEADED gasoline or UNLEADED gasoline blended with a maximum of 85% ethanol (E-85) in your Flex Fuel Vehicle (FFV).
166 Fuel and Refueling RUNNING OUT OF FUEL Avoid running out of fuel because this situation may have an adverse effect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from off to on several times after refueling to allow the fuel system to pump the fuel from the tank to the engine. On restarting, cranking time will take a few seconds longer than normal. • Normally, adding 1 gallon (3.8L) of fuel is enough to restart the engine.
Fuel and Refueling 167 With the Easy Fuel® “no cap” fuel system, use the following directions when filling from a portable fuel container: When filling the vehicle’s fuel tank from a portable fuel container, use the funnel included with the vehicle. 1. The white plastic funnel is located under the spare tire tool panel located in the floor compartment behind the rear seat. 2. Unlatch and remove the spare tire tool panel. Remove the white plastic funnel. 3.
168 Fuel and Refueling Use the following guidelines to avoid electrostatic charge build-up when filling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in the vehicle (including the cargo area). • Keep the fuel pump nozzle in contact with the fuel container while filling. • DO NOT use a device that would hold the fuel pump handle in the fill position. Easy Fuel® “No Cap” Fuel System WARNING: The fuel system may be under pressure.
Fuel and Refueling 169 At the next opportunity, do the following: 1. Safely pull off the road. 2. Turn off the engine. 3. Open the fuel filler door and remove any visible debris from the fuel fill opening. 4. Insert either the fuel fill nozzle or the fuel fill funnel provided with the vehicle several times to dislodge any debris and/or allow the inlet to close properly. If this action corrects the problem, the message may not reset immediately.
170 Fuel and Refueling Calculating Fuel Economy Do not measure fuel economy during the first 1000 miles (1600 kilometers) of driving (this is your engine’s break-in period); a more accurate measurement is obtained after 2000 miles–3000 miles (3200 kilometers–4800 kilometers). Also, fuel expense, frequency of fill-ups or fuel gauge readings are not accurate ways to measure fuel economy. 1. Fill the fuel tank completely and record the initial odometer reading. 2.
Fuel and Refueling 171 Your vehicle is equipped with various emission control components and a catalytic converter which will enable your vehicle to comply with applicable exhaust emission standards. To make sure that the catalytic converter and other emission control components continue to work properly: • Use only the specified fuel listed. • Avoid running out of fuel. • Do not turn off the ignition while your vehicle is moving, especially at high speeds.
172 Fuel and Refueling On-board Diagnostics (OBD-II) Your vehicle is equipped with a computer that monitors the engine’s emission control system. This system is commonly known as the on-board diagnostics system (OBD-II). The OBD-II system protects the environment by ensuring that your vehicle continues to meet government emission standards. The OBD-II system also assists your authorized dealer in properly servicing your vehicle.
Fuel and Refueling 173 Readiness for Inspection/Maintenance (I/M) Testing Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced. See On-board Diagnostics (OBD-II) in this chapter.
174 Transmission AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the LOCK position and remove the key whenever you leave your vehicle. WARNING: Do not use the Tow/Haul feature when driving in icy or slippery conditions as the increased engine braking can cause the rear wheels to slide and the vehicle to swing around with the possible loss of vehicle control.
Transmission 175 To put your vehicle in gear: • Press the brake pedal • Start the engine • Move the gearshift lever into the desired gear. If your vehicle is equipped with a floor-shift transmission, press the gearshift lever release button (on the front of the lever) while shifting into the desired gear.
176 Transmission The TOW HAUL indicator light will illuminate in the instrument cluster. Tow/Haul delays upshifts to reduce frequency of transmission shifting. Tow/Haul also provides engine braking in all forward gears when the transmission is in the D (Drive with Overdrive) position; this engine braking will slow the vehicle and assist the driver in controlling the vehicle when descending a grade.
Transmission 177 Forced downshifts • Allowed in D (Drive) only. • Press the accelerator to the floor. • Allows transmission to select an appropriate gear. Automatic Transmission Adaptive Learning This feature is designed to increase durability and provide consistent shift feel over the life of the vehicle. A new vehicle or transmission may have firm shifts, soft shifts or both. This operation is considered normal and will not affect function or durability of the transmission.
178 Transmission If the fuse is not blown and the brake lamps are working properly, the following procedure will allow you to move the gearshift lever from P (Park): 1. Apply the parking brake, turn the 1 ignition key to the off position, and remove the key. 2. Using a screwdriver (or similar tool), carefully pry off and remove the chrome trim ring (1) from the shifter bezel base. 3.
Four-Wheel Drive (If Equipped) 179 USING FOUR-WHEEL DRIVE (4WD) (if equipped) WARNING: For important information regarding safe operation of this type of vehicle, see General Information in the Wheels and Tires chapter. Note: Do not use 4X4 mode on dry, hard surfaced roads. Doing so will produce excessive noise, increase tire wear and may damage drive components. 4X4 mode is only intended for consistently slippery or loose surfaces.
180 Four-Wheel Drive (If Equipped) 4WD switch positions WARNING: Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions. Avoid sharp turns or abrupt maneuvers in these vehicles. Note: The AdvanceTrac® with RSC® stability enhancement system can be turned off manually by pressing the AdvanceTrac button, see the Traction Control chapter for more information.
Four-Wheel Drive (If Equipped) 181 How Your Vehicle Differs From Other Vehicles WARNING: Vehicles with a higher center of gravity such as utility and four-wheel drive vehicles handle differently than vehicles with a lower center of gravity. Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions.
182 Four-Wheel Drive (If Equipped) Power is supplied to all four wheels through a transfer case. On 4WD vehicles, the transfer case allows you to select 4WD when necessary. Information on transfer case operation and shifting procedures can be found in this chapter. Information on transfer case maintenance can be found in the Maintenance chapter. You should become thoroughly familiar with this information before you operate your vehicle.
Four-Wheel Drive (If Equipped) 183 Note: Do not rock the vehicle for more than a few minutes or damage to the transmission and tires may occur or the engine may overheat. If your vehicle gets stuck in mud or snow it may be rocked out by shifting between forward and reverse gears, stopping between shifts, in a steady pattern. Press lightly on the accelerator in each gear.
184 Four-Wheel Drive (If Equipped) Once through water, always try the brakes. Wet brakes do not stop the vehicle as effectively as dry brakes. Drying can be improved by moving your vehicle slowly while applying light pressure on the brake pedal. Be cautious of sudden changes in vehicle speed or direction when you are driving in mud. Even 4WD vehicles can lose traction in slick mud. As when you are driving over sand, apply the accelerator slowly and avoid spinning your wheels.
Four-Wheel Drive (If Equipped) 185 If you do stall out, do not try to turn around because you might roll over. It is better to back down to a safe location. Apply just enough power to the wheels to climb the hill. Too much power will cause the tires to slip, spin or lose traction, resulting in loss of vehicle control. Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating.
186 Four-Wheel Drive (If Equipped) Avoid sudden braking as well. Although a 4WD vehicle may accelerate better than a two-wheel drive vehicle in snow and ice, it won’t stop any faster, because as in other vehicles, braking occurs at all four wheels. Do not become overconfident as to road conditions. Make sure you allow sufficient distance between you and other vehicles for stopping. Drive slower than usual and consider using one of the lower gears.
Brakes 187 GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out. Have them inspected by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, have your vehicle inspected by an authorized dealer. Note: Brake dust may accumulate on the wheels, even under normal driving conditions.
188 Brakes HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal. The anti-lock braking system will not eliminate the dangers inherent when: • You drive too closely to the vehicle in front of you. • Your vehicle is hydroplaning. • You take corners too fast. • The road surface is poor.
Traction Control 189 PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
190 Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac® system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac® system.
Stability Control 191 A Vehicle without AdvanceTrac® with RSC® skidding off its intended route. B Vehicle with AdvanceTrac® with RSC® maintaining control on a slippery surface. USING ADVANCETRAC® WITH RSC® The system automatically activates when you start your engine. The AdvanceTrac with RSC system cannot be completely turned off, but the electronic stability control and roll stability control portions of the system are disabled when the transmission is in reverse (R).
192 Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system; this may include reduced performance or a false activation.
Parking Aids 193 Using the Front and Rear Sensing System Rear Sensing System The rear sensors are only active when the transmission is in R (Reverse). As the vehicle moves closer to the obstacle, the rate of the audible warning increases. When the obstacle is fewer than 10 inches (25 centimeters) away, the warning sounds continuously. If a stationary or receding object is detected farther than 10 inches (25 centimeters) from the side of the vehicle, the tone sounds for only three seconds.
194 Parking Aids Front Sensing System The front sensors are active when the gearshift is in any position other than P (Park) or N (Neutral) and the vehicle speed is below 8 mph (13 km/h). A. Coverage area of up to 27 inches (70 centimeters) from the front of the vehicle and about 6–9 inches (15–23 centimeters) to the side of the front end of the vehicle. Refer A to the reverse sensing section for details on coverage area.
Parking Aids 195 REAR VIEW CAMERA SYSTEM (IF EQUIPPED) WARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
196 Parking Aids Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R (Reverse). The system uses two types of guides to help you see what is behind your vehicle: 1. Fixed guidelines: Show the actual path the vehicle is moving in while reversing in a straight line, which can be helpful when backing into a parking space or aligning the vehicle with another object behind the vehicle. 2.
Parking Aids 197 Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone D C. Fixed guideline: Yellow zone C E D. Fixed guideline: Green zone E. Centerline A B The fixed guidelines fade in and out depending on the steering wheel position. Always use caution while reversing.
198 Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death. WARNING: When you are going downhill, your vehicle speed may increase above the set speed. The system will not apply the brakes.
Cruise Control 199 Setting a Speed 1. Accelerate to the desired speed. 2. Press and release SET+. 3. Take your foot off the accelerator pedal. The indicator will turn on in the instrument cluster. Changing the Set Speed • Press and hold SET+ or SET–. Release the button when you reach the desired speed. • Press and release SET+ or SET–. The set speed will change in approximately 1 mph (2 km/h) increments. • Press the accelerator pedal or brake pedal until you reach the desired speed.
200 Driving Aids STEERING Your vehicle is equipped with power steering. Power steering uses energy from the engine to decrease the driver’s effort in steering the vehicle. To help prevent damage to the power steering pump: • Never hold the steering wheel to the extreme right or the extreme left for more than a few seconds when the engine is running. • Do not operate the vehicle with the power steering pump fluid level below the MIN mark on the reservoir. • Some noise is normal during operation.
Driving Aids 201 AUTO LEVELING SUSPENSION SYSTEM (if equipped) The automatic leveling suspension system is designed to improve ride, handling and general vehicle performance during: • Certain road conditions • Steering maneuvers • Braking • Acceleration • Towing This system keeps the rear of your vehicle at a constant level through a hydraulic pump inside each rear shock. Depending on the payload or road surface conditions it will take approximately 2 miles (3.2 km) for the leveling to complete.
202 Load Carrying ROOF RACKS AND LOAD CARRIERS WARNING: When loading the roof rail crossbars, it is recommended to evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity, may handle differently than unloaded vehicles. Extra precautions, such as slower speeds and increased stopping distance, should be taken when driving a heavily loaded vehicle.
Load Carrying 203 LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle will provide maximum return of vehicle design performance.
204 Load Carrying WARNING: The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available. Overloading or improperly loading your vehicle can contribute to loss of vehicle control and vehicle rollover.
Load Carrying 205 Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear).
206 Load Carrying GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position. The GVW must never exceed the GVWR.
Load Carrying 207 WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer.
208 Load Carrying WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with a higher limit than the original tires do not increase the GVWR and GAWR limitations. WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1.
Load Carrying 209 • Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb. (45 kg) bags of cement. Do you have enough load capacity to transport the cement to your home? If you and your friend each weigh 220 lb.
210 Load Carrying CARGO MANAGEMENT SYSTEM (IF EQUIPPED) A storage compartment is located in the floor of the rear cargo area. Lift up on the handle to open the cover. To close, lower the cover and press down on the handle until the latch clicks. Cargo Shelf and Divider (If Equipped) WARNING: Do not load any objects on the shelf that may obstruct your vision or strike occupants of the vehicle in the case of a sudden stop or collision. WARNING: Do not place people or pets on or under the parcel shelf.
Load Carrying 211 To move the shelf to the divider position: Pull up and pivot the shelf over the channels on the side trim panels and snap vertically in place. POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED) WARNING: In extreme climates, excessive ice buildup may occur, causing the running boards not to deploy. Be sure that the running boards have deployed, and have finished moving before attempting to step on them. The running boards will resume normal function once the blockage is cleared.
212 Load Carrying The running boards automatically move when the doors are opened to assist entering and exiting the vehicle. Automatic Power Deploy The running boards will extend down and out when the doors are opened. Automatic Power Stow The running boards will return to the stowed position after a two second delay when the doors are closed. Manual Power Deploy To manually operate the running boards, refer to the Information Displays chapter.
Towing 213 TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury. Note: For information on electrical items such as fuses or relays, see the Fuses chapter.
214 Towing TRAILER SWAY CONTROL WARNING: Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation. Note: This feature does not prevent trailer sway, but reduces it once it begins.
Towing 215 Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specified weight. The maximum trailer weights listed may be limited to this specified weight, as your vehicle’s electrical system may not include the wiring connector needed to use electric trailer brakes.
216 Towing ESSENTIAL TOWING CHECKS Follow these guidelines for safe towing: • Do not tow a trailer until you drive your vehicle at least 1000 miles (1600 kilometers). • Consult your local motor vehicle laws for towing a trailer. • See the instructions included with towing accessories for the proper installation and adjustment specifications. • Service your vehicle more frequently if you tow a trailer. See your scheduled maintenance information.
Towing 217 Trailer Hitch Cover Your vehicle is equipped with a removable trailer hitch trim cover. To remove the trim cover: 1. Loosen the two quarter-turn fasteners in the bottom of the cover by turning them counterclockwise. Pull the cover downward to remove it. The fasteners remain attached to the cover. 2. To reinstall the cover, insert the four plastic tabs on top of the cover into the corresponding slots, as shown in the illustration and push the cover up into the bumper trim. 3.
218 Towing Integrated Hitch Rating WARNING: Towing trailers beyond the maximum tongue weight exceeds the limit of the towing system and could result in vehicle structural damage, loss of vehicle control and personal injury. The standard integrated hitch has two ratings depending on mode of operation: • Weight-carrying mode requires a draw bar and hitch ball. The draw bar supports all the vertical tongue load of the trailer.
Towing 219 5. Install and adjust the tension in the weight distributing bars so that the height of the front fender is approximately halfway between H1 and H2. 6. Check that the trailer is level or slightly nose down toward your vehicle. If not, adjust the ball height accordingly and repeat Steps 2–6. Once the trailer is level or slightly nose down toward the vehicle: • Lock the bar tension adjuster in place. • Check that the trailer tongue securely attaches and locks onto the hitch.
220 Towing 6. Make sure you securely attach and lock the trailer tongue to the hitch. 7. Install safety chains, lighting, and trailer brake controls as required by law or the trailer manufacturer. 8. Drive the vehicle and trailer at 20–25 mph (32–40 km/h) for approximately 2 miles (3 kilometers) to re-level the suspension. 9. Park your vehicle and trailer on a level surface. 10. Measure the height to the top of your vehicles front wheel opening on the fender a second time. This is H2. 11.
Towing 221 The rating for the tow vehicle’s braking system operation is at the gross vehicle weight rating, not the gross combined weight rating. Separate functioning brake systems are required for safe control of towed vehicles and trailers weighing more than 1500 pounds (680 kilograms) when loaded. Trailer Lamps WARNING: Never connect any trailer lamp wiring to the vehicle’s tail lamp wiring; this may damage the electrical system resulting in a fire.
222 Towing • If your vehicle is equipped with AdvanceTrac™ with RSC, this system may turn on during typical cornering maneuvers with a heavily loaded trailer. This is normal. Turning the corner at a slower speed while towing may reduce this tendency. • If you are towing a trailer frequently in hot weather, hilly conditions, at the gross combined weight rating (or any combination of these factors), consider refilling your rear axle with synthetic gear lubricant (if the axle is not already filled with it).
Towing 223 TRANSPORTING THE VEHICLE If you need to have your vehicle towed, contact a professional towing service or, if you are a member of a roadside assistance program, your roadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
224 Driving Hints TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing If your vehicle becomes inoperable (without access to wheel dollies, car-hauling trailer, or flatbed transport vehicle), it can be flat-towed (all wheels on the ground, regardless of the powertrain and transmission configuration) under the following conditions: • Your vehicle is facing forward for towing in a forward direction. • Place the transmission in position N.
Driving Hints 225 ECONOMICAL DRIVING Fuel economy is affected by several things, such as how you drive, the conditions you drive under and how you maintain your vehicle. There are some things to keep in mind that may improve your fuel economy: • Accelerate and slow down in a smooth, moderate fashion. • Drive at steady speeds without stopping. • Anticipate stops; slowing down may eliminate the need to stop. • Combine errands and minimize stop-and-go driving. • Close the windows for high-speed driving.
226 Driving Hints DRIVING THROUGH WATER Note: Driving through deep water may allow water into the transmission and engine causing internal damage. If you drove through deep water, check the transmission and engine fluid. If water is found, see your authorized dealer immediately for fluid replacement. Do not drive quickly through standing water, especially if the depth is unknown. Traction or brake capability may be limited and if the ignition system gets wet, your engine may stall.
Driving Hints 227 FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle, leaving the pedal area unobstructed, and which can be firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. • Incorrectly fitted floor mats can cause the accelerator pedal to become stuck in the open position. This can cause loss of vehicle control.
228 Roadside Emergencies ROADSIDE ASSISTANCE Vehicles Sold in the United States: Getting Roadside Assistance To fully assist, if you have a vehicle concern, Ford Motor Company offers a complimentary Roadside Assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: • 24 hours a day, seven days a week. • Throughout the life of the vehicle for original owners.
Roadside Emergencies 229 Vehicles sold in the United States: Using roadside assistance United States Lincoln vehicle clients who require Roadside Assistance, call 1-800-521-4140. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest Lincoln dealership within 100 miles (161 kilometers). To obtain reimbursement information, United States Lincoln vehicle clients, call 1-800-521-4140.
230 Roadside Emergencies FUEL PUMP SHUT-OFF SWITCH The fuel pump shut-off switch is a device intended to stop the electric fuel pump when your vehicle has been involved in a substantial jolt. After a collision, if the engine cranks but does not start, the fuel pump shut-off switch may have been activated. WARNING: Failure to inspect and, if necessary, repair fuel leaks after a collision may increase the risk of fire and serious injury.
Roadside Emergencies 231 JUMP-STARTING THE VEHICLE WARNING: The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. WARNING: Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted. Do not attempt to push-start your automatic transmission vehicle. Automatic transmissions do not have push-start capability.
232 Roadside Emergencies Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1.
Roadside Emergencies 233 Jump Starting 1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables. Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery.
234 Customer Assistance GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repairs require special training, equipment or both, so not all authorized dealers are authorized to perform all warranty repairs.
Customer Assistance 235 In Canada: Mailing address Lincoln Customer Relationship Centre Ford Motor Company of Canada, Limited P.O. Box 2000 Oakville, Ontario L6K 1C8 Telephone 1-800-387-9333 Online www.lincolncanada.com Additional assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or Service Advisor at your selling/servicing authorized dealer. 2.
236 Customer Assistance IN CALIFORNIA (U.S. ONLY) California Civil Code Section 1793.
Customer Assistance 237 THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Your satisfaction is important to Ford Motor Company and to your dealer. If a warranty concern has not been resolved using the three-step procedure outlined earlier in this chapter in the Getting the Services You Need section, you may be eligible to participate in the BBB AUTO LINE program. The BBB AUTO LINE program consists of two parts – mediation and arbitration.
238 Customer Assistance UTILIZING THE MEDIATION or ARBITRATION PROGRAM (CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation or arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
Customer Assistance 239 If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 U.S.A. Telephone: (313) 594-4857 FAX: (313) 390-0804 Email: expcac@ford.
240 Customer Assistance If your vehicle must be serviced while you are traveling or living in the Middle East, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 Telephone: +971 4 3326084 Toll-Free Number of the Kingdom of Saudi Arabia: 800 8971409 Local Telephone Number of Kuwait: 24810575 FAX: +971 4 3327299 Email: menacac@ford.com www.me.ford.
Customer Assistance 241 Obtaining a French Owner’s Manual A French owner’s manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company.
242 Fuses CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.
Fuses 243 FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power distribution box is located in the engine compartment. It has high-current fuses that protect your vehicle’s main electrical systems from overloads.
244 Fuses Fuse or relay location 4 5 6 7 Fuse amp rating — — — — 8 9 10 11 12 13 14 15 — — — 40A** 40A** 30A ** 40A** 20A** 16 17 40A** 20A** 18 19 20 21 22 23 24 25 30A** — — 30A** 30A** — — — 26 27 28 29 — 20A* 25A* 20A* 30 10A* Protected circuits Trailer tow battery charge relay Fuel pump relay Electronic fan 1 relay Rear window defroster, heated mirror relay Electronic fan 3 relay Run/start relay Not used Power running boards Run/start relay Starter relay Electronic fan Right hand high int
Fuses Fuse or relay location 31 32 33 34 35 36 37 Fuse amp rating — 40A** 40A** 30A** 30A** 30A** — 38 — 39 40 41 — — 10A* 42 43 44 45 46 47 48 49 50 51 — 5A* 20A* 25A* — — — — 30A** 40A** 52 10A* 53 54 55 — — 5A* 245 Protected circuits Not used Blower motor relay 110–volt AC power point Auxiliary blower motor Powertrain control module relay Power liftgate Trailer tow left hand stop/turn relay Trailer tow right hand stop/ turn relay Backup lamps relay Electronic fan 2 relay Powertrain control m
246 Fuses Fuse or relay location 56 Fuse amp rating 30A* 57 58 59 60 61 62 10A* 15A* 15A* — — — 63 64 65 25A** 30A** 20A** 66 20A** 67 40A** 68 69 70 71 60A** 60A** 30A** 20A** 72 20A** 73 74 75 — 30A** 20A* 76 20A* 77 15A* Protected circuits Passenger compartment fuse panel run/start feed Blower motor relay coil Trailer tow backup lamps Heated mirrors Not used Fuel pump diode Left high intensity discharge headlamp relay Electronic fan Moonroof Auxiliary power point (instrument panel)
Fuses Fuse or relay location 78 79 Fuse amp rating — 20A* 80 81 82 83 84 85 * Mini Fuses ** Cartridge — — — — — — Fuses 247 Protected circuits Not used Vehicle power 3 – powertrain control module Not used Not used Not used Not used Not used Wiper motor relay Passenger Compartment Fuse Panel The fuse panel is located under the right-hand side of the instrument panel. To remove the trim panel for access to the fuse box, pull the panel toward you and swing it out away from the side and remove it.
248 Fuses The fuses are coded as follows: Fuse or relay location 1 2 3 Fuse amp rating 30A 15A 15A 4 5 30A 10A 6 7 8 20A 10A 10A Protective circuits Driver window Driver side memory module Audio rear seat controls, Satellite radio, SYNC Passenger window Keypad illumination, 3rd row seat enable, Brake-shift interlock, Smart fuse panel logic power Turn signals Low beam headlamps (left) Low beam headlamps (right) 2014 Navigator (nav) Owners Guide gf, 2nd Printing, February 2014 USA (fus)
Fuses Fuse or relay location 9 10 11 12 Fuse amp rating 15A 15A 10A 7.
250 Fuses Fuse or relay location 35 Fuse amp rating 10A 36 37 38 39 40 41 5A 10A 20A 20A 20A 15A 42 43 44 45 46 10A 10A 10A 5A 7.
Maintenance 251 GENERAL INFORMATION WARNING: Turn off the power running boards, if equipped, before working under the vehicle, jacking or placing any object under the vehicle. Never place your hand between the extended running board and the vehicle. A moving running board may cause injury. Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers that are there to help you with their professional servicing expertise.
252 Maintenance Working with the Engine Off 1. Set the parking brake and shift to P (Park). 2. Turn off the engine and remove the key (if equipped). 3. Block the wheels. Working with the Engine On WARNING: To reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 1. Set the parking brake and shift to position P (Park). 2. Block the wheels. OPENING AND CLOSING THE HOOD 1.
Maintenance 253 UNDER HOOD OVERVIEW 5.4L V8 A A W B C D ER FLUID SH ONLY I H G F A. Windshield washer fluid reservoir B. Engine oil dipstick C. Brake fluid reservoir D. Engine coolant reservoir E. Air filter assembly F. Power steering fluid reservoir G. Power distribution box H. Engine oil filler cap I.
254 Maintenance ENGINE OIL DIPSTICK A. – MIN B. – MAX A B ENGINE OIL CHECK Refer to the scheduled maintenance information for the appropriate intervals for checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait 15 minutes for the oil to drain into the oil pan. 3. Set the parking brake and ensure the gearshift is securely latched in P (Park). 4. Open the hood. Protect yourself from engine heat. 5. Locate and carefully remove the engine oil level dipstick.
Maintenance 255 Adding Engine Oil Note: Do not remove the engine oil level dipstick or the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by the American Petroleum Institute (API).
256 Maintenance The coolant concentration should be maintained within 48% to 50%, which equates to a freeze point between -30°F (-34°C) and -34°F (-37°C). Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool 300-ROB75240 available from your dealer. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations.
Maintenance 257 Note: During normal vehicle operation, the engine coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it require the engine coolant to be drained, the system to be flushed, or the engine coolant to be replaced. • DO NOT MIX different colors or types of coolant in your vehicle. Make sure the correct coolant is used.
258 Maintenance Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the coolant concentration above 50%. • A coolant concentration of 60% will provide improved freeze point protection. Engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage.
Maintenance 259 When this occurs the vehicle will still operate. However: • The engine power will be limited. • The air conditioning system will be disabled. Continued operation will increase the engine temperature and the engine will completely shut down, causing steering and braking effort to increase. Once the engine temperature cools, the engine can be restarted. Take your vehicle to an authorized dealer as soon as possible to minimize engine damage.
260 Maintenance AUTOMATIC TRANSMISSION FLUID CHECK Note: Transmission fluid should be checked by an authorized dealer. If required, fluid should be added by an authorized dealer. The automatic transmission does not have a transmission fluid dipstick. Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes. Your transmission does not consume fluid. However, the fluid level should be checked if the transmission is not working properly, (i.e.
Maintenance 261 FUEL FILTER Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. WASHER FLUID CHECK WARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
262 Maintenance WARNING: Keep batteries out of reach of children. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention. If acid is swallowed, call a physician immediately.
Maintenance 263 Because your vehicle’s engine is electronically controlled by a computer, some control conditions are maintained by power from the battery. When the battery is disconnected or a new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum driveability and performance. To begin this process: 1. With the vehicle at a complete stop, set the parking brake. 2. Put the gearshift in P (Park), turn off all accessories and start the engine. 3.
264 Maintenance CHANGING THE WIPER BLADES Replace wiper blades at least once per year for optimum performance. To replace the wiper blades: 1. Fold back the wiper arm and position the wiper blade at a right angle to the wiper arm. 2. To remove the wiper blade, press the retaining clip (A) to disengage the wiper blade, then pull the blade A down toward the windshield to remove it from the arm. 3. Install the new wiper blade on the arm and press it into place until a click is heard.
Maintenance 265 4. To attach the new wiper to the wiper arm, align the cross pin and keyway (denoted with the arrows) and firmly press the wiper blade into the wiper arm until an audible snap is heard. If you find this procedure too difficult, please see your dealer. AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running.
266 Maintenance Changing the Air Filter Element 1. Locate the mass air flow sensor electrical connector on the air outlet tube. This connector will need to be unplugged. 2. Unlock the locking clip on the connector (connector shown from below for clarity), then squeeze and pull the connector off of the air outlet tube. 3.
Maintenance 267 5. Release the three clamps that secure the cover to the air filter housing. Push the air filter cover toward the center of the vehicle and up slightly to release it. 6. Remove the air filter element from the air filter housing. 7. Install a new air filter element. 8. Replace the air filter housing cover and secure the clamps. Be careful not to crimp the filter element edges between the air filter housing and cover and ensure that the tabs on the edge are properly aligned into the slots.
268 Maintenance ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, an authorized dealer should check the alignment of your headlamps. Vertical Aim Adjustment Before aim adjustment, disable the air suspension system. Refer to Message center in the Driver Controls chapter. 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away. • (A) 8 feet (2.
Maintenance 269 5. Locate the vertical adjuster on each headlamp, then use a Phillips #2 screwdriver to turn the adjuster either counterclockwise or clockwise in order to adjust the vertical aim of the headlamp. The upper edge of the light pattern should touch the horizontal reference line. 6. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NOT ADJUSTABLE. 7. Repeat Steps 3–5 for the other headlamp. 8. Close the hood and turn off the lamps.
270 Maintenance Replacing HID Headlamp Bulbs The low/high beam headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. For bulb replacement, see your authorized dealer. Replacing Front Parking Lamp, Turn Signal, and Side Marker Bulbs The front parking lamp, turn signal, and side marker bulbs are located in the headlamp assembly. Follow the same steps to replace any of these bulbs. 1. Make sure the headlamp control is in the off position. 2. Open the hood.
Maintenance 271 Replacing Fog Lamp Bulbs 1. From underneath the vehicle, rotate the harness/bulb assembly counterclockwise to remove it from the fog lamp assembly. 2. Carefully disconnect the bulb from the harness assembly via the two snap clips. Install the new bulb in reverse order. Replacing Tail, Stop, Turn Signal, and Backup Lamp Bulbs The tail, stop, turn signal, and backup lamp bulbs are located in the same portion of the tail lamp assembly, one just below the other.
272 Maintenance Replacing Supplemental Tail Lamp Bulbs 1. Make sure the headlamp switch is in the off position. 2. Open the liftgate and remove interior trim panel. 3. Remove four nuts from the lamp assembly. 4. Carefully pry the lamp assembly away from the vehicle by pulling the assembly directly straight out to expose the bulb socket. DO NOT TIP THE LAMP ASSEMBLY SIDEWAYS. 5. Rotate the bulb socket counterclockwise and remove from lamp assembly. 6.
Maintenance 273 Replacing the High-Mount Brake Lamp Bulbs To change the high-mount brake lamp bulbs: 1. Remove the two screws holding the lamp assembly in place. 2. Pull the lamp assembly straight out. 3. Disconnect the wire harness. 4. Press the four tabs that hold the light assembly on, one at a time, and pull the black bulb carrier away from the lamp. 5. Pull the old bulb out and replace with the new bulb. 6. Snap the black bulb carrier into the lamp assembly. 7. Connect the wire harness. 8.
274 Maintenance BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
Vehicle Care 275 GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes.
276 Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any painted surface; if these substances come in contact with your vehicle, wash it off as soon as possible. • Remove any exterior accessories before entering a car wash.
Vehicle Care 277 WAXING Regular waxing is necessary to protect the paint on your car from the elements. We recommend that you wash and wax the painted surface once or twice a year. When washing and waxing, park your vehicle in a shaded area out of direct sunlight. Always wash your vehicle before applying wax. • Use a quality wax that does not contain abrasives. • Follow the manufacturer’s instructions to apply and remove the wax. • Apply a small amount of wax in a back-and-forth motion, not in circles.
278 Vehicle Care • Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage. • Never wash or rinse any ignition coil, spark plug wire or spark plug well, or the area in and around these locations.
Vehicle Care 279 CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side airbag system and affect performance of the side airbag in a collision.
280 Vehicle Care CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS WARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. Clean the instrument panel and cluster lens with a clean, damp, white, cotton cloth, then use a clean and dry, white, cotton cloth to dry these areas. • Avoid cleaners or polishes that increase the gloss of the upper portion of the instrument panel.
Vehicle Care 281 CLEANING LEATHER SEATS (IF EQUIPPED) • Remove dust and loose dirt with a vacuum cleaner. • Clean spills and stains as quickly as possible. • For routine cleaning, wipe the surface with a soft, damp cloth. For more thorough cleaning, wipe the surface with a mild soap and water solution. Dry the area with a soft cloth.
282 Vehicle Care VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time (30 days or more), read the following maintenance recommendations to make sure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested for reliable, regular driving. Long-term storage under various conditions may lead to component degradation or failure unless specific precautions are taken to preserve the components.
Vehicle Care 283 • When removing vehicle from storage, check coolant fluid level. Confirm there are no cooling system leaks, and fluid is at the recommended level. Battery • Check and recharge as necessary. Keep connections clean. • If storing your vehicle for more than 30 days without recharging the battery, it may be advisable to disconnect the battery cables to ensure battery charge is maintained for quick starting.
284 Wheels and Tires GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: • Avoid sharp turns and abrupt maneuvers; • Drive at safe speeds for the conditions; • Keep tires properly inflated; • Never overload or improperly load your vehicle; and • Make sure every passenger is properly restrained.
Wheels and Tires 285 A vehicle equipped with four-wheel drive (when selected) has the ability to use all four wheels to power itself. This increases traction which may enable you to safely drive over terrain and road conditions that a conventional two-wheel drive vehicle cannot. Power is supplied to all four wheels through a transfer case or power transfer unit. Four-wheel drive vehicles allow you to select different drive modes as necessary.
286 Wheels and Tires • Narrower – to provide greater maneuverability in tight spaces, particularly in off-road use. As a result of the above dimensional differences, sport-utility vehicles, vans and trucks often will have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition. These differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car.
Wheels and Tires 287 Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear 11⁄2 times as well on the government course as a tire graded 100.
288 Wheels and Tires Glossary of Tire Terminology • Tire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry. • Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of manufacture. Also referred to as DOT code. • Inflation pressure: A measure of the amount of air in a tire.
Wheels and Tires 289 INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall.
290 Wheels and Tires F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in your owner’s manual. If not, contact a local tire dealer. Note: You may not find this information on all tires because it is not required by federal law. G. H: Indicates the tire’s speed rating.
Wheels and Tires 291 I. M+S or M/S: Mud and Snow, or AT: All Terrain, or AS: All Season. J. Tire Ply Composition and Material Used: Indicates the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. Tire manufacturers also must indicate the ply materials in the tire and the sidewall, which include steel, nylon, polyester, and others. K. Maximum Load: Indicates the maximum load in kilograms and pounds that can be carried by the tire.
292 Wheels and Tires Additional Information Contained on the Tire Sidewall for LT Type Tires LT type tires have some additional B information beyond those of P type C tires. These differences are A described below. Note: Tire Quality Grades do not apply to this type of tire. D B A. LT: Indicates a tire, designated by the Tire and Rim Association, that is intended for service on light trucks. B. Load Range/Load Inflation Limits: Indicates the tire’s load-carrying capabilities and its inflation limits.
Wheels and Tires 293 Information on T Type Tires B A C D E T type tires have some additional information beyond those of P type tires. These differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example. Tire Quality Grades do not apply to this type of tire. A.
294 Wheels and Tires Location of the Tire Label You will find a Tire Label containing tire inflation pressure by tire size and other important information located on the B-Pillar or the edge of the driver’s door. See the payload description and graphic in the Load Carrying chapter. INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat.
Wheels and Tires 295 on the B-Pillar or the edge of the driver’s door. Failure to follow the tire pressure recommendations can cause uneven treadwear patterns and adversely affect the way your vehicle handles. Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire.
296 Wheels and Tires Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type mini-spare tires, see the Dissimilar Spare Tire and Wheel Assembly Information section. Store and maintain at 60 psi (4.15 bar). For full-size and dissimilar spare tires, see Dissimilar Spare Tire and Wheel Assembly Information under Changing a Road Wheel in this chapter. Store and maintain at the higher of the front and rear inflation pressure as shown on the Tire Label. 6.
Wheels and Tires 297 Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended.
298 Wheels and Tires Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford.
Wheels and Tires 299 Your vehicle is equipped with tires designed to provide a safe ride and handling capability. Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as a pair. The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels.
300 Wheels and Tires Highway Hazards No matter how carefully you drive, there is always the possibility that you may eventually have a flat tire on the highway. Drive slowly to the closest safe area out of traffic. This may further damage the flat tire, but your safety is more important. If you feel a sudden vibration or ride disturbance while driving, or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road.
Wheels and Tires 301 Note: After having your tires rotated, inflation pressure must be checked and adjusted to the vehicle requirements. Rotating your tires at the recommended interval (as indicated in your scheduled maintenance information) will help your tires wear more evenly, providing better tire performance and longer tire life. • Rear-wheel drive vehicles/Four-wheel drive vehicles (front tires at left of diagram) Sometimes irregular tire wear can be corrected by rotating the tires.
302 Wheels and Tires Follow these guidelines when using snow tires and chains: • If possible, avoid fully loading your vehicle. • Use only cable type chains or chains offered by Ford as an accessory or equivalent. Other conventional link type chains may contact and cause damage to the vehicle’s wheel house and/or body. • Do not install chains on the front wheels as this may interfere with suspension components. • Chains are not recommended for use on the P275/55R20 tire.
Wheels and Tires 303 As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
304 Wheels and Tires Changing Tires with a Tire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor located inside the tire and wheel assembly cavity. The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed. Take care when changing the tire to avoid damaging the sensor. You should always have your tires serviced by an authorized dealer.
Wheels and Tires 305 When you believe your system is not operating properly The main function of the tire pressure monitoring system is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended. See the following chart for information concerning your tire pressure monitoring system: Low tire pressure warning light Solid warning light Possible cause Customer action required Tire(s) under-inflated 1.
306 Low tire pressure warning light Flashing warning light Wheels and Tires Possible cause Customer action required Spare tire in use Repair the damaged road wheel and tire and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When your temporary spare tire is installed in this section.
Wheels and Tires 307 CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, have an authorized dealer install a new tire pressure monitoring system sensor and valve stem. WARNING: See Tire Pressure Monitoring System in this chapter for important information. If the tire pressure monitoring sensor becomes damaged, it will no longer function.
308 Wheels and Tires A dissimilar spare tire and wheel assembly is defined as a spare tire or wheel that is different in brand, size or appearance from the road tires and wheels and can be one of three types: 1. T-type mini-spare: This spare tire begins with the letter T for tire size and may have Temporary Use Only molded in the sidewall. 2.
Wheels and Tires 309 The usage of a full-size dissimilar spare tire and wheel assembly can lead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly, additional caution should be given to: • to
310 Wheels and Tires WARNING: Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
Wheels and Tires 311 Removing the jack and tools 1. Open the liftgate, then locate the access panel on the floor behind the third row seat. Unlatch and remove the panel. 2. Remove the jack and tools assembly tray from the compartment by turning the wing-nut counterclockwise to relieve tension against the jack assembly tray. Remove the bag from the jack and tool assembly tray by loosening the strap.
312 Wheels and Tires 6. Block the wheels (both front or both rear) on the opposite end of the vehicle from the wheel being changed. If on a grade, block both wheels on the downward side of the hill. 7. Turn off the deployable running boards. See the Driving Aids chapter. 8. Obtain the spare tire and jack tools from their storage locations. 9. Use the tip of the jack handle to remove any wheel trim. 10.
Wheels and Tires 313 • Rear • Note: Jack at the specified locations to avoid damage to the vehicle. 13. Remove the lug nuts with the lug wrench. 14. Replace the flat tire with the spare tire, making sure the valve stem is facing outward. 15. Reinstall the lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. 16. Lower the wheel by turning the jack handle counterclockwise. 17.
314 Wheels and Tires Stowing the Spare Tire 1. Lay the tire on the ground, near the rear of the vehicle, with the valve stem side facing up. 2. Slide the wheel partially under the vehicle and install the retainer through the wheel center. If equipped, you may have to remove the wheel center cap prior to pushing the retainer through the center of the wheel. To remove the center cap, press it off with the jack tool from the inner side of the wheel.
Wheels and Tires 315 TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel.
316 Capacities and Specifications ENGINE SPECIFICATIONS Engine Cubic inches Fuel Firing order Ignition system Spark plug gap Compression ratio 5.4L V8 Engine 330 Minimum 87 octane or (E-85) 1-3-7-2-6-5-4-8 Coil on plug 0.039–0.043 inch (1.05 +/– 0.05 mm) 9.
1 Motorcraft Orange Antifreeze/Coolant Prediluted Base radiator without auxiliary rear heat 16.4 qt (15.5L) Heavy duty trailer tow radiator without auxiliary rear heat 16.9 qt (16.0L) Base radiator with auxiliary rear heat 19.0 quarts (18.0L) Heavy duty trailer tow radiator with auxiliary rear heat 19.5 qt (18.
Motorcraft MERCON LV ATF Motorcraft MERCON LV ATF 13.1 qt (12.4L) Fill between MIN and MAX lines on reservoir 3.5 pt (1.7L) 4.5 pt(2.1L) Four Wheel Drive Electronic Shift On Fly 1.6 - 1.8 qt (1.5 - 1.7L) Four Wheel Drive Torque On Demand 1.5 qt (1.4L) Automatic transmission fluid (6R80)6,7 Power steering fluid Front axle fluid (Four Wheel Drive) Rear axle fluid (9.
Fill as required Standard 28.0 gal (106.0L) Navigator L 33.5 gal (126.8L) 2.25 lb (1.
Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
Capacities and Specifications 321 MOTORCRAFT® PART NUMBERS Component Air filter element Battery Oil filter Spark plugs1 Seat filter (if equipped) Windshield wiper blade 5.4L V8 engine FA-1883 BXT-65-650 or BXT-65-750 (if equipped) FL-820-S HJFS24FP/SP-509 FS-104 WW-2201-PF WW-1601-PF (rear) 1 Refer to scheduled maintenance information for the appropriate intervals for changing the spark plugs.
322 Capacities and Specifications The Vehicle Identification Number (VIN) contains the following information: A. World manufacturer identifier B. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint Devices and their location C. Make, vehicle line, series, body type D. Engine type E. Check digit F. Model year G. Assembly plant H. Production sequence number.
Capacities and Specifications 323 TRANSMISSION CODE DESIGNATION You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents.
324 Accessories ACCESSORIES For a complete listing of the accessories that are available for your vehicle, please contact an authorized dealer or visit our online store at: www.Accessories.Lincoln.com (United States only). Lincoln Motor Company will repair or replace any properly authorized dealer-installed Lincoln Genuine Accessories found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories.
Accessories 325 *The accessory manufacturer designs, develops and therefore warrants Lincoln Licensed Accessories, and does not design or test these accessories to Lincoln Motor Company engineering requirements. Contact an authorized Lincoln dealer for the manufacturer’s limited warranty details, and request a copy of the Lincoln Licensed Accessories product limited warranty from the accessory manufacturer.
326 Extended Service Plan Extended Service Plan (ESP) PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRS WITH A LINCOLN EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. Only) Lincoln owners have discovered the powerful protection of Lincoln Extended Service Plan. It is the only extended service plan backed by Lincoln Motor Company, and provides peace of mind protection beyond the New Vehicle Limited Warranty coverage.
Extended Service Plan 327 Roadside Assistance Exclusive 24/7 roadside assistance, including: • Towing, flat-tire change and battery jump starts. • Out of fuel and lock-out assistance. • Travel expense reimbursement for lodging, meals and rental car. • Destination assistance for taxi, shuttle, rental car coverage and emergency transportation. Transferable Coverage If you sell your vehicle before your Lincoln Extended Service Plan coverage expires, you can transfer any remaining coverage to the new owner.
328 Extended Service Plan SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a Lincoln Extended Service Plan. Lincoln Extended Service Plan is the only service contract backed by Lincoln Motor Company of Canada, Limited. Depending on the plan you purchase, Lincoln Extended Service Plan provides benefits such as: • Rental reimbursement. • Coverage for certain maintenance and wear items.
Audio System 329 GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Distance and strength Terrain Station overload Radio reception factors The further you travel from an FM station, the weaker the signal and the weaker the reception.
330 Audio System MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the MP3 disc. The player numbers each MP3 track on the disc (noted by the .mp3 file extension) from T001 to a maximum of T255.
Audio System 331 AM/FM/CD WITH SYNC® A R 1 2 3 B 4 5 6 LOAD Q P VOL PUSH O AUX CD N TUNE MENU AM/FM M REV SHUFFLE L K J I D OK FWD E TEXT SCAN SEEK C SEEK H G F WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
332 Audio System • In satellite radio mode, press the SEEK buttons to tune to the next or previous channel. • In category mode, turn the control to scroll through the list of available satellite radio categories. • In phone mode, press this button to access the phone features of the SYNC system. See the SYNC® chapter for more information. D. MENU: Press this button to access different audio system features.
Audio System 333 G. SEEK: • In radio mode, press and release this button to go to the next preset radio station or disc track. • In CD and MP3 modes, press this button to select the next track, or press and hold to advance within the same track. H. FWD: Press this button to manually fast forward in a CD track or MP3 file. I. TEXT/SCAN: • In radio and CD/MP3 mode, press and hold to hear a brief sampling of radio stations, CD tracks or MP3 files.
334 Audio System REAR AUDIO CONTROLS Your vehicle is equipped with rear seat audio controls. This allows front and middle seat passengers to listen to different media sources (radio, CD or SYNC) simultaneously. Note: The front and middle seat passengers cannot listen to two different radio stations at the same time. A B MEDIA J VOLUME I H G F E D C A. Headphone/Speaker Press this button to turn the rear speakers on (Single Play mode) or off (Dual Play mode). B.
Audio System 335 E. Left arrow button • In radio mode, press and release this button to scroll through memory presets. Press and hold to go to the previous station • In CD and SYNC modes, press and release this button to advance to the previous track. Press and hold to rewind within that track. F. Auxiliary audio input jacks: Plug in and play auxiliary audio sources. G. VOLUME Press the up and down arrow buttons to increase or decrease the headphone volume level.
336 Audio System Switching Dual Play Mode On You can switch Dual Play mode on by simultaneously pressing the 2 and 4 memory preset buttons on the audio or by doing the following: 1. Press the headphone/speaker control. The headphone icon illuminates in both front and rear audio displays indicating the rear seat speakers are off and the headphones are on. 2. Press MEDIA to change audio sources (as heard in the headphones only). 3. Use the other controls to adjust the playing media.
Audio System 337 SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels Sirius broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of Sirius satellite radio channels, visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call Sirius at 1–888–539–7474. Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License.
338 Audio System Sirius Satellite Radio Service Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes. Sirius satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming.
Audio System Radio display Invalid Channel Condition The channel is no longer available. Unsubscribed Channel Your subscription does not include this channel. No Signal Updating Call SIRIUS 1–888–539–7474 None Found. Check Channel Guide. Subscription Updated The signal is lost from the Sirius satellite or Sirius tower to your vehicle antenna. Update of channel programming in progress. Your satellite service is no longer available.
340 Audio System AUXILIARY INPUT JACK WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
Audio System 341 3. Switch the radio on. Select either a tuned FM station or a CD. 4. Adjust the volume as desired. 5. Switch your portable music player on and adjust its volume to half its maximum level. 6. Press AUX until LINE or LINE IN appears in the display. You should hear music from your device even if it is low. 7. Adjust the volume on your portable music player until it reaches the volume level of the FM station or CD. Do this by switching back and forth between the AUX and FM or CD controls.
342 Audio System REAR SEAT ENTERTAINMENT SYSTEM (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
Audio System 343 Your system does not play the following types of discs: • Optical disc CD-1 • CD-ROM • DVD-ROM mini disc-CDG (audio only, not graphics) Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the driver while operating your vehicle.
344 Audio System Wired Headphones You can use any standard stereo headphones by plugging them into the 1/8–inch (3.5 millimeter) headphone jack on each of the headrest DVD systems. Remove and save the protective plastic cover to access the jacks. Remember to replace the cover when the jacks are not in use. A/V Input You can connect an external audio/video device that uses common RCA interface cables to the Ford DVD system, such as a video game device or VCR.
Audio System 345 Console Controls Note: Do not use any solvents or cleaning materials when cleaning the video device. Note: Do not use any abrasive cleaners, which may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Note: Lock the LCD screen in the fully closed position when not in use. Note: Do not put pressure on the screen. Note: Caution children against touching or scratching the screen, as it may become dirty or damaged.
346 Audio System D. STOP*: Press this button to stop playing the disc. E. PLAY*: Press this button to play the disc. F. Headphone jack: Plug in your wired headphones with a 1/8-inch (3.5 millimeter) stereo connector plug to listen to audio from the program. G. Video input jack (red): Connect an RCA cable to this port. H. Video input jack (white): Connect an RCA cable to this port. I. Video input jack (yellow): Connect an RCA cable to this port. J.
Audio System 347 Note: Different types of batteries have different characteristics. Do not mix different types. Note: Do not mix old and new batteries. Mixing old and new batteries can shorten battery life and cause chemical leaks from the old batteries. Note: Keep the batteries out of the reach of children. If someone swallows a battery, immediately consult a doctor. When you dispose of used batteries, keep to governmental regulations or environmental public institution rules that apply in your area.
348 Audio System 4. TV-Monitor A*: Press this button to control TV mode of Monitor A. 5. SOUND AROUND ON/OFF*: Press this button to turn the FM transmitter off and on. 6. MUTE: Press this button to turn off the sound sent to the headphones. The screen displays that the sound is muted. Pressing the button again restores sound to the previously set level. This feature is only functional in DVD mode. 7. MENU: Press this button to go to the disc’s root menu. 8.
Audio System 349 19. FF (Fast Forward): Press this button to search the disc forward continuously. There are five speed options to choose: 2X, 4X, 8X, 16X, and 32X. 20. SETUP: Press this button to navigate the Setup Menu. See How to use the DVD on-screen display (OSD) menu for more information. 21. EJECT: Press this button to eject or load a disc. 22. TV-Monitor B*: Press this button to control TV mode of Monitor B. 23. DVD-Monitor B: Press this button to control DVD mode of Monitor B. 24.
350 Audio System Turning the Device On and Off 1. Pivot the screen downward until you reach a comfortable viewing angle. 2. Press POWER on the lower-left corner of the front panel or on the remote control. The controls illuminate when the system is in use. 3. When the device is on and is displaying a picture, pivot the screen to change the viewing angle to optimize the picture quality. 4. Remember to turn the device off and pivot the LCD panel to the locked position when not in use.
Audio System 351 • Do not use any discs with labels or stickers attached. The following malfunctions may result from using such discs: • The system cannot eject a disc due to a label or sticker peeling off and jamming the eject mechanism. • The system cannot read audio data correctly, such as playback skipping or no playback at all, due to heat shrinking of a sticker or label causing the disc to warp. • Before playing a disc, clean it with a commercially available cleaning cloth.
352 Audio System Audio Setup Press SETUP on the remote control, and then use CH +, CH -, VOL + and VOL - to navigate the Setup Page. Press ENTER to make a selection, and then VOL - to return to the submenu. Speaker Setup Press SETUP on the remote control and then use VOL + to navigate to the Audio Setup Page. Press ENTER to navigate to the submenu. Use CH +, CH -, VOL + and VOL - to navigate the submenus. Press ENTER or VOL + to make a selection, and then VOL + and VOL - to see the selection items.
Audio System 353 • CONTRAST allows you to increase or decrease the picture contrast. The setting ranges from -16 to +16. • HUE allows you to increase or decrease the color hue. The setting ranges from -9 to +9. • SATURATION allows you to increase or decrease the color intensity. The setting ranges from -9 to +9. How to Use the Device On-screen Display Menus Press SETUP on the remote control, and then use CH +, CH -, VOL + and VOL - to navigate the Setup Page.
354 Audio System Password Press SETUP and navigate to the Password submenu under the Password Setup Page. 1. Press VOL +, and then press ENTER on the remote control to enter the submenu. 2. Input the old six-digit password or the default password. The default password is 136900. 3. Input a new six-digit password using the numeric buttons. 4. Confirm the new password by entering the same new password again. 5. Scroll to OK, and then press ENTER to finish.
Audio System 355 Selecting Folders and Songs When you insert an MP3 disc in the player, an MP3 audio-navigation screen appears automatically. You can change folders and songs by navigating the file system. The DVD player plays the songs in the order you burned them to the disc. 1. If a disc is playing, press DISPLAY on the remote control, and then press CH + and CH - to go through the folder list on the left side of the navigation screen. 2. Highlight the folder you want, and then press ENTER. 3.
356 Audio System Controls • MENU: Press this button to return to the menu structure. • CH + and CH -: Press these buttons to move the select bar up and down within the selected menu or file list. • VOL -: Press this button to move the menu up one level. Pressing this button in some menu functions returns you to the menu structure. • VOL +: Press this button to select a menu item. • ENTER: Press this button to make a selection or begin file playback. • PLAY: Press this button to play a file.
Audio System 357 Troubleshooting Symptom The device does not power on. Possible cause Your vehicle ignition is not on. The remote control does not have batteries installed. The infrared sensor is The batteries in the remote control are not inoperative. working. The remote sensor eye is blocked. The infrared transmitter is blocking the sensor eye of the component to be controlled The disc does not play. You inserted the disc backward. The disc is defective. Try another disc.
358 Audio System Symptom There is no sound, or there is distorted sound. Possible cause You did not connect the DVD player properly. You did not attach the cables securely into the appropriate jacks. If you are using the wireless headphones, make sure you turn them on. The headphone volume is too low. Something may be blocking the signal between the monitor and the headphones. The device feels warm. If the device is in use for a long time, it does become warm. This is normal.
Audio System 359 FCC Warning: To assure continued FCC compliance, the user must use the provided grounded power supply cord and the shielded video interface cable with bonded ferrite cores. Also, any unauthorized change or modifications to this device would void the user’s authority to operate this device. Macrovision Notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
360 Audio System This Warranty does not extend to the elimination of externally generated static or noise, correction of antenna problems, costs incurred for installation, removal or reinstallation of the product, or to damage to digital memory devices, media devices, gaming devices, discs, speakers, accessories, or vehicle electrical systems.
SYNC® 361 SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions & Information) (if equipped). • Use applications, such as Pandora and Stitcher, via SYNC AppLink™ (if applicable). • Access phonebook contacts and music via voice commands.
362 SYNC® GENERAL INFORMATION Make sure you review your device’s manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST. In the United States, call: 1–800–392–3673. In Canada, call: 1–800–565–3673. Times are subject to change due to holidays.
SYNC® 363 When using SYNC: • Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities. • Do not leave playing devices in your vehicle during extreme conditions as it could cause them damage. See your device’s manual for further information. • Do not attempt to service or repair the system. See your authorized dealer.
364 SYNC® USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display. Say any of the following: Say: If you want to: “Phone” “USB” Make calls. Access the device connected to your USB port. “Bluetooth Audio” Stream audio from your phone.
SYNC® 365 Adjusting the Interaction Level Push the voice icon; when prompted, say “Voice settings”, then any of the following: When you say: “Interaction mode standard” The system: Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts. The system defaults to the standard interaction mode.
366 SYNC® USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’s functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: • Answering an incoming call • Ending a call • Using privacy mode • Dialing a number • Redialing • Call waiting notification • Caller ID.
SYNC® 367 Pairing Subsequent Phones Note: To scroll through the menus, press the up and down arrows on your audio system. Note: Make sure the vehicle ignition and radio are turned on and that the transmission is in position P. 1. Press the phone button and scroll until System Settings is selected. 2. Press OK and scroll until Bluetooth Devices is selected and press OK. 3. Scroll until Add Bluetooth Device is selected and press OK. 4. When Find SYNC appears in the display, press OK. 5.
368 SYNC® “PHONE” “Dial”1,4 “Phone book ”2 “Phone book at work” OR “Phone book at office”2 “Call history incoming”2 “Connections”2 “Go to privacy” “Hold” 1 These commands do not require you to say “Phone” first. These commands are not available until phone information is completely downloaded using Bluetooth. 3 See “MENU” table below. 4 See “DIAL” table below.
SYNC® 369 Phone book commands: When you ask SYNC® to access a phone book name, number, etc., the requested information appears in the display to view. Press the phone button and say “Call” to call the contact.
370 SYNC® Phone Options during an Active Call During an active call, you have additional menu features which become available such as putting a call on hold, joining calls, etc. Use the arrow buttons to scroll through the menu options. To access: 1. Press MENU during an active call. 2. When Active Call Menu is selected, press OK. 3. Scroll to cycle through the following options: When you select: Mute Call? Privacy Call Hold Join Calls You can: Mute the call.
SYNC® When you select: Enter Tones Phonebook Call History Return 371 You can: Enter “tones” such as numbers for passwords. Scroll until the desired number appears in the display, then press OK; a tone sounds as confirmation. Repeat as necessary. Access your phonebook contacts. 1. Press OK to select, then scroll through your phonebook contacts. 2. Press OK again when the desired selection appears in the display. 3. Press the phone button. Access your call history log. 1.
372 SYNC® Accessing Features through the Phone Menu SYNC’s phone menu allows you to redial a number, access your call history and phone book and send text messages as well as access phone and system settings. You can also access advanced features, such as 911 Assist, Vehicle Health Report and SYNC Services. 1. Press the phone button to enter the Phone Menu. 2. Scroll to cycle through: When you select: Phone Redial Call History1 Phonebook1,2 You can: Redial the last number called (if available).
SYNC® When you select: Text Message1 Phone Settings1 SYNC Services3 911 Assist4 Vehicle Health Report3 Mobile Apps3 System Settings Exit Phone Menu 373 You can: Enables you to send, download and delete text messages. Allows you to view your phone’s status, set ring tones, select your message notification, change phone book entries and automatically download your cellular phone among other features.
374 SYNC® Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages.
SYNC® 375 Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. The display indicates when all your text messages have been deleted and SYNC returns you to the text message menu. Note: SYNC does not automatically download all of your unread text messages at every ignition cycle (as it does with call history and phonebook if automatic download is set to on). Return exits the current menu when you press OK.
376 SYNC® Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phone book and also set up automatic download. 1. Press the phone button. 2. Scroll until Phone Settings appears, then press OK. 3.
SYNC® When you select: Modify Phonebook Auto Download Return 377 You can: Modify the contents of your phone book (such as add, delete, download). Press OK to select and scroll between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone. See your phone’s user guide on how to push contacts. Delete Phonebook: Press OK to delete the current phone book and call history. When Delete Phonebook appears, press OK to confirm.
378 SYNC® System Settings System Settings provide access to your Bluetooth Devices and Advanced menu features. Use the arrow buttons to scroll through the menu options. The Bluetooth Devices menu allows you to add, connect, delete and set a phone as primary as well as turn your Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information.
SYNC® 379 If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. When the desired selection is chosen, press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates all Bluetooth features. Delete a paired phone. Delete Device Press OK and scroll to select the device. Press OK to confirm. Delete all previously paired phones (and all Delete All Devices information originally saved with those phones).
380 If you select: Languages Factory Defaults Master Reset Install Application System Info MAP Profile Return SYNC® You can: Choose between English, Espanol and Francais. Once selected, all of SYNC’s radio displays and prompts are in the selected language. 1. Press OK to select and then scroll through the languages. 2. Press OK when the desired selection appears in the display. If you change the language setting, the display indicates that the system is updating.
SYNC® 381 SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, United States only): Provides access to traffic, directions and information such as travel, horoscopes, stock prices and more. • 911 Assist: Can alert 911 in the event of an emergency.
382 SYNC® Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature. If a crash deploys an airbag (excludes knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone. For more information about 911 Assist, visit www.SYNCMyRide.com, www.SYNCMyRide.
SYNC® 383 In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would activate 911 Assist); however, if 911 Assist is triggered, SYNC tries to contact emergency services. If a connected phone is damaged or loses connection to SYNC, SYNC searches for, and tries to connect to, any available previously paired phone and tries to make the call to 911. Before making the call: • SYNC provides a short window of time (about 10 seconds) to cancel the call.
384 SYNC® Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems that are electronically monitored by the vehicle and will not monitor or report the status of any other system, (i.e., brake lining wear).
SYNC® 385 You can run a report (after the vehicle has been running a minimum of 60 seconds) by pressing the voice button and saying “Vehicle health report”, or pressing the phone button. To run a report using the phone button: 1. Press the phone button to enter Phone Menu. 2. Scroll until Vehicle Health is selected and press OK. 3. Scroll to select from the following options: Vehicle Health Report options User Preferences: Automatic Reports: Press OK and select on Press OK to select or off.
386 SYNC® SYNC Services: Traffic, Directions & Information (TDI) (If Equipped, United States Only) Note: SYNC Services varies by trim level and model year and may require a subscription. Traffic alerts and turn-by-turn directions available in select markets. Message and data rates may apply. Ford Motor Company reserves the right to change or discontinue this product service at any time without prior notification or incurring any future obligation. Note: SYNC Services requires activation prior to use.
SYNC® 387 reports, precise turn-by-turn directions, business search, news, sports, weather and more. For a complete list of services, or to learn more, please visit www.SYNCMyRide.com. Connecting to SYNC Services Using Voice Commands 1. Press the voice button. 2. When prompted, say “Services”. This initiates an outgoing call to SYNC Services using your paired and connected Bluetooth-enabled cellular phone. 3.
388 SYNC® If you miss a turn, SYNC automatically asks if you want the route updated. Just say, “Yes” when prompted and a new route will be delivered to your vehicle. Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel. 2. Say “Good-bye” from the SYNC Services main menu. Personalizing Push to interrupt Portable SYNC Services quick tips You can personalize your Services feature to provide quicker access to your most used or favorite information.
SYNC® 389 SYNC AppLink™ Note: This feature is only available in the United States. Note: Your smartphone must be paired and connected to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. It is recommended to lock your iPhone after starting an application. Note: The AppLink feature is not available if your vehicle is equipped with the MyFord Touch or MyLincoln Touch system.
390 SYNC® To Access Using the Navigation Screen (If Equipped) 1. Press the Phone button. 2. Press the SYNC Apps tab. 3. Press Mobile Apps. 4. Select the app to start it. To Access Using Voice Commands 1. Press the voice icon. 2. When prompted, say “Mobile Apps”. 3. Say the name of the application after the tone. 4. The app should start. While an app is running through SYNC, you can press the voice button and speak commands specific to the app, such as “Play Station Quickmix”.
SYNC® 391 5. Depending on how many digital media files are on your connected device, Indexing may appear in the radio display. When indexing is complete, the screen returns to the Play Menu. 6. Press OK and scroll through selections of: • Play All • Artists • Albums • Genres • Playlists • Tracks • Explore USB • Similar Music • Return When the desired selection appears in the display, press OK to build your desired music selection.
392 SYNC® “USB” “Play playlist ”1,3 “Play previous folder”2 “Play previous track” “Play song ”1,3 “Play track ”1,3 “Refine album ”1,3 “Refine artist ”1,3 “Refine song ”1,3 “Refine track ”1,3 “Repeat off” “Repeat on” “Search album ”1,3 “Search artist ”1,3 “Search genre ”1,3 “Search song ”1,3 “Search track ”1,3 “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” 1 “” is a dynamic listing, meaning that it could be the name
SYNC® 393 Voice command guide Turn on to listen to music which has already been randomly indexed during the indexing process. Turn off and the system does not begin to play any of your music until all media has all been indexed. Indexing times can vary from device to device and also with regard to the number of songs being indexed. “Search/Play Genre” The system searches all the data from your indexed music and, if available, begins to play the chosen type of music.
394 SYNC® Press the voice icon and when prompted say “Bluetooth Audio” and then any of the following: “BLUETOOTH AUDIO” “(Phone) (Media) (Bluetooth) Connections” “Pause” “Play” “Play next track ” “Play previous track ” Media Menu Features The media menu allows you to select your media source, how to play your music (by artist, genre, shuffle, repeat, etc.), and also to add, connect or delete devices. 1. Press AUX and then MENU to enter the Media Menu. 2.
SYNC® When you select: Select Source 395 You can: SYNC USB: Press OK to access music plugged into your USB port. You can also plug in devices to charge them (if supported by your device). Once connected, the system indexes any readable media files. (The time required to complete this depends on the size of the media content being indexed.) If Autoplay is on, you can access media files randomly as they are indexed. If turned off, indexed media is not available until the indexing process is complete.
396 When you select: Media Settings Mobile Apps System Settings Exit Media Menu SYNC® You can: Choose to shuffle or repeat your music and select your Autoplay settings. Once these selections are turned on, they remain on until turned off. Press SEEK to play the previous or next track. Note: Some digital media players require both USB and line in ports to stream data and music separately.
SYNC® 397 Accessing Your Play Menu This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. 1. Make sure that your device is plugged into the USB port and is turned on. 2. Press AUX and then MENU to enter the Media Menu. 3. Scroll to select the Play Menu and press OK. If there are no media files to access, the display indicates there is no media.
398 When you select: Albums Genres Playlists Tracks SYNC® You can: Sort all indexed media by albums. If there are less than 255 indexed albums, they are listed alphabetically in flat file mode. If there are more, they are organized into alphabetical categories. 1. Press OK to enter the album menu and select from playing all albums or from any individual indexed album. 2. Scroll until the desired album is chosen and press OK. Sort indexed music by genre (category) type.
SYNC® When you select: Explore USB Similar Music Return 399 You can: Explore all supported digital media on your media device connected to the USB port. You can only view media content which is compatible with SYNC; other files saved are not visible. Press OK to select. Then scroll to explore indexed media on your flash drive. Play music similar to what is currently playing from the USB port. The system uses the metadata information of each song to compile a playlist for you. Press OK to select.
400 SYNC® System Settings System settings provide access to your Bluetooth Devices and Advanced menu features. The Bluetooth Devices menu allows you to add, connect and delete a device as turn the Bluetooth feature on and off. Your Advanced menu allows you to access and set prompts, languages, defaults and perform a master reset. Bluetooth Devices Menu Options This menu allows you to add, connect and delete devices as well as turn Bluetooth on and off. 1. Press AUX and then MENU to enter the Media Menu.
SYNC® 401 When you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. When the desired selection is chosen, press OK. Turning Bluetooth off disconnects all Bluetooth devices and deactivates Bluetooth features. Delete a paired media device. Delete Device Press OK and scroll to select the device. Press OK to confirm. Delete all previously paired devices. Delete All Devices Press OK to select. Exit the current menu.
402 When you select: Languages Factory Defaults Master Reset Application Return SYNC® You can: Choose from English, Francais and Espanol. The displays and prompts are in the selected language. 1. Press OK to select and then scroll through the languages. 2. Press OK when the desired selection appears in the display. 3. If you change the language setting, the display indicates that the system is updating. When complete, SYNC takes you back to the Advanced menu. Return to the factory default settings.
SYNC® 403 TROUBLESHOOTING Your SYNC system is easy to use. However, should questions arise, see the tables below. Use the website at any time to check your phone’s compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours). Visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca for more information.
404 SYNC® Phone issues Possible Possible solution(s) cause(s) • Try pushing your phonebook The system says Limitations on contacts to SYNC by using the your phone’s Phonebook Add Contacts feature. Downloaded but capability. • If the missing contacts are my phonebook in stored on your SIM card, try SYNC is empty or moving them to the device is missing memory. contacts. • Remove any pictures or special ring tones associated with the missing contact.
SYNC® 405 Phone issues Possible Possible solution(s) cause(s) • Go to the website to review Text messaging is • This is a phone-dependent your phone’s compatibility. not working on • Try turning off the device, feature, OR SYNC. • Possible phone resetting the device or removing the device’s battery, then trying malfunction. again. Issue Issue I am having trouble connecting my device. SYNC does not recognize my device when I turn on the car.
406 SYNC® Issue Bluetooth audio does not stream. SYNC does not recognize music that is on my device. USB and media issues Possible Possible solution(s) cause(s) • This is a Make sure the device is phone-dependent connected to SYNC and that feature, OR you have pressed play on your • The device is device. not connected. • Your music files • Make sure that all song details may not contain are populated.
SYNC® 407 Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible Possible solution(s) cause(s) The preferred When you register your account, I am unable to dealer you must list a preferred dealer. retrieve the information did If one is already listed, try report on the not load correctly. selecting another dealer and website, or I logging out. Log back in and receive a system change it back to your preferred error. dealer and retrieve the report.
408 SYNC® Voice command issues Possible Possible solution(s) cause(s) SYNC does not • You may be • Review the Phone voice understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections. OR • You may be • Be aware that SYNC’s speaking too soon microphone is either in your or at the wrong rear view mirror or in the time. headliner just above the windshield.
SYNC® Issue SYNC does not understand or is calling the wrong contact when I want to make a call. Issue SYNC does not find any mobile apps that are on my phone. 409 Voice command issues Possible Possible solution(s) cause(s) • Review the phone voice • You may be using the wrong commands at the beginning of voice commands, the phone section. OR • Make sure you are saying the • You may not be contacts exactly as listed.
410 Navigation System (If Equipped) NAVIGATION CONTROLS WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible.
Navigation System (If Equipped) 411 A. Memory presets: • Store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns. • In radio and satellite radio mode, press a button to access your saved presets or channels. B. CD and DVD slot: Insert a CD or DVD, label side up. C. Eject: Press this button to eject a CD or DVD from the system. D.
412 Navigation System (If Equipped) L. MENU: • Press this button to access the system menu. • Press while the system menu is active to access the menu tabs of Display, Clock, Feedback Settings, System Settings and Valet Mode. M. SOUND: • Press this button to access the sound menu. • Press while the sound menu is active to access the menu tabs of Bass/Treble, Balance/Fade, SCV (Speed Compensated Volume), DSP (Digital Signal Processing) and Visualizer. N. MEDIA: • Press this button to access the media menu.
Navigation System (If Equipped) 413 Display mode voice commands “Day” “Night” “Auto” “Help” STATUS BARS The top status bar shows the current mode, exterior temperature, time and display icons if you have enabled Bluetooth or other options. The bottom status bar shows the Home icon and may show the Artist and Title of the currently playing CD, Artist and Title for Jukebox and radio.
414 Navigation System (If Equipped) Loading Photos Note: The system is not compatible with discs written in Packet Write mode. Your system allows you to upload and view up to 32 photos. Only the photograph(s), which meets the following conditions, display: • The file must be 1.5MB or smaller. • The file extension must be .jpe, .jpg or .jpeg. • The file path must be 255 characters or fewer. • Up to 256 files or folders can display in one folder.
Navigation System (If Equipped) 415 • Use your bare finger to touch the center of a touch-control graphic. Touching off-center of the graphic may affect operation of a nearby control. • Do not press hard on the controls. They are sensitive to light touch. • Keep metal and other conductive material away from the surface of the touchscreen as this may cause electronic interference (for example, inadvertently turning on a feature other than the one you meant to turn on).
416 Navigation System (If Equipped) You can say these commands at any time. “DVD” “User profile” “Jukebox” “Video CD” “Line in” “Voice settings” “Mobile apps” “Help” * See the SYNC chapter for more information on these features. To access a list of all available voice commands, press the I hard button. Select the Help tab on the touchscreen, then the Voice Commands tab and choose the desired category. Helpful Hints • Make sure the interior of your vehicle is as quiet as possible.
Navigation System (If Equipped) 417 SYSTEM MENU FEATURES Your system offers many menu features, such as allowing you to adjust the touchscreen brightness, time and language, feedback and system settings. You can access these options by pressing the MENU hard button. If you select: Display Clock You can: Brightness allows you to adjust screen brightness by touching + or -. Contrast allows you to adjust screen contrast by touching + or -.
418 Navigation System (If Equipped) If you select: Feedback Settings You can: Touch Screen Button Beep allows you to select when the system sounds an audible tone: All Buttons (whenever any system button is touched), Touch Screen (only when touchscreen selections are made) or Off (no audible tones at all). Voice Volume allows you to change navigation voice and audible tone volume by touching + or -. Satellite Radio Channel Name allows you to choose to display the satellite radio channel name.
Navigation System (If Equipped) If you select: System Settings Valet Mode Voice Control 419 You can: Language allows you to choose between English, Spanish and French. Units allows you to choose between English and Metric measurements. Keyboard Layout allows you to choose between an ABC and QWERTY keyboard. Delete Stored Items allows you to choose to delete all of the entries from Address Book, Previous Destinations, Avoid Areas, Saved Photos and Voice Recognition Profiles.
420 Navigation System (If Equipped) ENTERTAINMENT Your system offers many media options. You can access these options using the touchscreen or voice commands. AM/FM Radio Press the RADIO hard button. To change between AM, FM1 and FM2, touch the AM or FM tab. You can also access satellite radio by pressing this button. See Sirius satellite radio later in this section for more information. When you select: Show Options You can: Scan allows you to hear a brief sampling of all radio stations.
Navigation System (If Equipped) When you select: Show Presets Set PTY/All 421 You can: View the preset stations. Save a station by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the station. Sound returns when finished. Select a category of music you would like to search for and then choose to either seek or scan for the stations.** Note: The system scans the frequency band three times for the chosen program type.
422 Navigation System (If Equipped) If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart. * “<530–1710>” “<87.7–107.9>” “RADIO” “FM2” “FM2 preset <1–6>” “AM” “Off ” “AM <530–1710>” “On” “AM preset <1–6>” “FM <87.7–107.
Navigation System (If Equipped) 423 HD Radio™ Information (If Available) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion.
424 Navigation System (If Equipped) When you select: Tune Set PTY/All Multicast You can: Go up and down the frequency in individual increments. If the current station has multiple digital broadcasts, the multicast indicator appears. Press Tune repeatedly to advance through all available broadcasts. If you are on the last broadcast channel, press to advance to the next frequency on the band. Select a category of music you would like to search for and then choose to either seek or scan for the stations.
Navigation System (If Equipped) When you select: To save a multicast station as a preset 425 You can: When the channel is active on-screen, press and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when finished. When recalling a HD2 or HD3 memory preset, there is a mute before the digital audio plays, as the system must once again acquire the digital signal.
426 Navigation System (If Equipped) In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate. Issue Echo, stutter, skip or repeat in audio. Increase or decrease in audio volume. Sound fading or blending in and out.
Navigation System (If Equipped) Issue HD2-HD7 stations not found when Scan is pressed. 427 Potential Station Issues Cause Action Pressing Scan disables No action required. HD2-HD7 channel This is normal search. behavior. * http://www.ibiquity.com/automotive/report_radio_station_experiences HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp.
428 Navigation System (If Equipped) Sirius® Satellite Radio (If Activated) Press the RADIO hard button, then select SAT on the touchscreen. When you select: SAT123 Scan Scan Presets Channel Guide Direct Tune Set Genre You can: Press this button to access three different satellite radio modes (SAT1, SAT2 or SAT3). Press this button to hear a brief sampling of all satellite radio channels within the current genre. Press these buttons to hear a brief sampling of all channels stored in the memory presets.
Navigation System (If Equipped) When you select: Memo Show Presets 429 You can: Press this button to save a song title and artist to the system. When the saved song is playing on any satellite radio channel, the system alerts you with a pop-up in the lower status bar. You can either tune to the station or ignore the pop-up. When you are in the Memo screen, the following options are available: Refresh allows you to refresh the current artist and title information.
430 Navigation System (If Equipped) Sirius® Satellite Radio Voice Commands If you are listening to Sirius satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to Sirius satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
Navigation System (If Equipped) 431 Sirius® Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
432 Navigation System (If Equipped) Potential reception issues When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Satellite radio signal Your display may show ACQUIRING... to interference indicate the interference and the audio system may mute. Station overload Radio Display Acquiring...
Navigation System (If Equipped) Radio Display Updating. 433 Troubleshooting tips Condition Update of channel programming in progress. Your satellite service is no longer available. Possible Action No action required. The process may take up to three minutes. Call Sirius Contact Sirius at 1–888–539–7474. 1-888-539-7474 to resolve subscription issues. No Channels Available. All the channels in the Use the channel guide selected channels are to turn off the Lock either skipped or or Skip function on locked.
434 Navigation System (If Equipped) CD Voice Commands If you are listening to a CD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a CD, press the voice button and, after the tone, say “CD”, then any of the commands in the following chart.
Navigation System (If Equipped) 435 DVD Note: Your system only plays NTSC formatted discs. The system does not support PAL format. Your system allows you to play DVD audio and video discs. Make sure your vehicle is in position P (vehicles equipped with an automatic transmission) or the parking brake is engaged (vehicles equipped with a manual transmission). This allows you to be able to view and hear the DVD. If your vehicle is moving, the video does not play.
436 Navigation System (If Equipped) Note: Some of the above settings are disc-dependent and availability and operation may vary. During disc play, you can also touch the screen to access the virtual remote, which allows you to Move Controls on the screen, as well as use the cursor controls, Enter and Return to navigate and select within the menus. Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation.
Navigation System (If Equipped) 437 DVD Voice Commands If you are watching a DVD, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not watching a DVD, press the voice button and, after the tone, say “DVD”, then any of the commands in the following chart.
438 Navigation System (If Equipped) Jukebox Your system has a Jukebox feature, which allows you to save desired tracks or CDs to the hard drive for later access. The hard drive can store up to 10 GB* (164 hours; approximately 2472 tracks) of music. The system contains a Gracenote media database that allows for display of song title, album title, and album cover art. After saving music to the hard drive, you can access and play your music by specific tracks, artists, albums or genres.
Navigation System (If Equipped) When you select: Music library Options 439 You can: Access all of your saved music. You can choose to view or play the material in the following ways: Play All Tracks allows you to play all tracks saved in the jukebox. Playlist allows you to play your own playlist. Play genre allows you to have the system play only music from a specific genre. Play artist allows you to have the system play only music by a specific artist.
440 Navigation System (If Equipped) Creating a Playlist Press the MEDIA hard button, and then select the Jukebox tab on the touchscreen. 1. Select Options. 2. Select Edit Playlists, then which playlist you would like to create. 3. Select which category you would like to access from your saved music. 4. Select the desired songs and then press Add. The system shows you the currently selected songs.
Navigation System (If Equipped) 441 User Device If your vehicle is equipped with SYNC, there is a User Device tab. For more information, see the SYNC chapter. Line In (Auxiliary Input Jack) Your vehicle is equipped with an audio input jack, which allows you to plug a portable audio device into your vehicle’s audio system. To turn this feature on, press the MEDIA hard button on the system. For more information on the auxiliary input jack, see Auxiliary input jack in the Audio Systems chapter.
442 Navigation System (If Equipped) Sirius Travel Link can help you locate the best gas prices, find movie listings, get current traffic alerts, access the current weather map, get accurate ski conditions and scores to current sports games. Press the I (information) button, then select Sirius Travel Link. Choose from any of the following services: When you select: Traffic On Route Traffic Nearby My Places Weather Fuel Prices Movie Listings Sports Info.
Navigation System (If Equipped) 443 “TRAVEL LINK” “College basketball schedule” “NFL scores” “College basketball scores” “NHL schedule” “College football schedule” “NHL scores” “College football scores” “Sports schedule”* “Fuel prices” “Sports scores”** “Golf leaders” “Traffic” “Golf schedule” “Travel link help” “Motor sports order” “Weather” “Motor sports schedule” “Weather map” “Movie listings” * If you have said, “Sports schedule”, you may say any of the commands in the “Sports schedule” chart: ** If
444 Navigation System (If Equipped) Calendar Press the I (information) button, then select Calendar. You can then select which month you would like to view by using the arrow buttons or selecting Go to Today. You can view calendars from one previous year and the next 10 years. Note: Not all tab selections may be available in all markets. Check with an authorized dealer for availability. System Information Press the I (information) button, then select System Information.
Navigation System (If Equipped) 445 SOUND The sound menu allows you to access and adjust settings, such as Bass, Treble, Fade, Balance, Speed Compensated Volume (SCV) and the visualizer. Press the SOUND hard button. When you select: Bass/Treble Balance/Fade SCV Visualizer You can: Increase or decrease levels by pressing + or -. Adjust the sound between the left and right speakers and front and rear speakers.
446 Navigation System (If Equipped) Route Guidance in Incompletely Mapped Areas There are some rural areas in the map database without fully verified roads.
Navigation System (If Equipped) 447 Quick Note: Items on this screen are selectable at any speed. Find Nearest POI Select up to five different points of interest (POI) favorites that you can search for while your vehicle is moving. You can change these categories at any time but the default categories are: • Gas Station • ATM • Restaurant • Accommodations • Parking Garage When you select a category, the system displays a list in order of distance from your vehicle’s location.
448 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Address Book You can store up to 25 entries, which you can use as destinations, waypoints and areas to avoid. You can sort the entries alphabetically, by date or icon.* Previous You can store up to 20 recently used Destination destinations and waypoints. Duplicate entries do not appear in the list.
Navigation System (If Equipped) 449 Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Street Address Touch this button to program a street address as a destination or waypoint. • State/Prov lets you use the keyboard to type or you can select the area to search from a list. The system bases the search on your vehicle’s current position or the previous selection.
450 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Point of Interest Touch this button to select a point of interest on the map as a destination or waypoint. (POI) There are three ways to search for a point of interest: 1. Enter a city name in the City field and a point of interest in the Name field. 2.
Navigation System (If Equipped) 451 Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Freeway Touch this button to select an entrance and Entrance/Exit exit point to a freeway you select. You can sort the entrance and exit point alphabetically or in order of distance from your vehicle’s position. You can then select the point you choose as a destination or waypoint.
452 Navigation System (If Equipped) Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Intersection Touch this button to select an intersection point. Enter the name of the first street, then the first letter of the second street. The system displays possible intersection matches based on the first letter of the second street.
Navigation System (If Equipped) 453 * To delete all stored Address Book and Previous Destination entries at once: 1. Press the MENU hard button. 2. Select the System Settings tab. 3. Press the View button for Delete Stored Items. 4. Select Address Book or Previous Destinations. Cancel Route Detour View Route Edit Route Preferences Edit Traffic Preferences Edit Destination/ Waypoints Edit Turn List Edit Route Touch this button to cancel the current route.
454 Navigation System (If Equipped) Programming a Destination Using Voice Commands Press the voice button on the steering wheel. If you want to: Enter an address. Enter an intersection. Find a point of interest (POI) by its category. Find a point of interest (POI) by its name. Go to a previous destination. Go to your home location. Use a nametag from your address book. Get help.
Navigation System (If Equipped) 455 Within these main categories, there are subcategories, which contain more listings: Subcategories Restaurant Auto Dealership Parking Public Transit Home & Garden Education Personal Care Services Setting Your Navigation Preferences Select settings for the system to take into account when planning your route. Press the NAV hard button. Map Content Map View Map Preferences Street Name displays current street name during route guidance.
456 Navigation System (If Equipped) Bird’s Eye View Turn List Format Preferred Route Avoid Freeways Avoid Tollroads Avoid Ferries Avoid Time Restricted Roads Traffic Icons to overlay on Map Map Preferences ON provides an elevated map perspective. OFF turns the feature off. Adjust Angle offers six different map angles. Top-to-Bottom starts the turn instructions from the top. Bottom-to-Top starts the turn instructions from the bottom.
Navigation System (If Equipped) 457 Traffic Preferences* Traffic Flow Overlay Touch this button to have the map show traffic flow coloring on major roads. Roads display in green (all clear), yellow (reduced speed) and red (stopped). Traffic Alert Touch this button to have the system traffic Notification incidents notifications along your programmed route. If you select Yes, a traffic incident pop-up asks you to consider or ignore the traffic incident.
458 Navigation System (If Equipped) Navigation Preferences When this feature is on, the system displays the average speed on a main road, initially set to 45 mph (72 km/h). You can change the setting for specific roads and for your driving preferences. This setting helps estimate your arrival time at a destination based on your driving preferences. Avg. Speed: Freeways When this feature is on, the system displays the average speed on a freeway, initially set to 65 mph (105 km/h).
Navigation System (If Equipped) Add 459 Avoid Areas Add items and areas that you want the system to avoid when creating a route for you. The system does its best to avoid these.* * There may be some situations where it is impossible to avoid the selection(s) completely. For example, if a destination or waypoint is located in the area that is set to avoid, the system cannot avoid it. Map Mode Press the MAP hard button to view map mode.
460 Navigation System (If Equipped) Address book entry default icon(s) indicates the location on the map of an address book entry. This is the default symbol shown after the entry has been stored to the Address Book by any method other than the map. You can select from any of the 22 icons available. You can use each icon more than once. Home indicates the location on the map currently stored as the home position. You can only save one address from the Address Book as your Home entry.
Navigation System (If Equipped) 461 In Full Screen Map Mode, touch this button to use the Zoom Direct buttons. The Zoom Direct buttons represent the most common map scales. Touch a button to show the map at the desired scale. The scale is approximate and based on the width of the map scale button. The size of the scale varies based on the screen size. Map Scrolling Single scroll mode allows you to press and release on the map display to bring the pressed position to the center of the screen.
462 Navigation System (If Equipped) When you select: View Traffic View/Edit Route You can: Adjust the map display to the right scale. This scale allows the entire route to be visible in the screen. Access these features when a route is active: Cancel route. Edit route preferences. Edit destination/waypoints. View route. Edit traffic preferences.* Edit turn list. * This feature requires activation of Sirius Travel Link, which is only available in the United States.
Navigation System (If Equipped) 463 “NAVIGATION” “Destination home” “Show route” “Destination intersection” “Show turn list” “Destination nearest ” “Destination nearest POI” “Voice on” “Destination POI” “Voice volume decrease” “Destination previous “Voice volume increase” destination” “Destination street address” “Zoom in” “Detour” “Zoom out” “Play nametags” “Help” “Repeat instruction” * If you have said the command, “Destination”, you may say any of the above commands or comman
464 Navigation System (If Equipped) Troubleshooting Symptoms Focus error. Bad disc. Track error. Invalid disc detected. A pop-up window displays “Address not found” or “Address range does not exist. Show the midpoint of the street?” Possible Cause The system is not able to play a reproduced disc. You inserted the disc upside down or the system is unable to read the information on the disc. The system is unable to reproduce a corrupt MP3 file.
Navigation System (If Equipped) Symptoms A pop-up window displays “Navigation fault. A system fault has been detected that may cause the navigation to perform abnormally. Please contact your dealership.” A pop-up window displays “Error. PINs did not match. Please re-enter.” A pop-up window displays “Invalid PIN. Please Re-enter.” Possible Cause There is a system hardware or software error. 465 Action Contact an authorized dealer.
466 Appendices GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”) from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online” or electronic documentation (“MS SOFTWARE”) are protected by international intellectual property laws and treaties.
Appendices 467 DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS: • Speech Recognition: If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
468 Appendices SOFTWARE’s ability to use WMDRM to play or copy protected content. This action does not affect unprotected content. When your DEVICE downloads licenses for protected content, you agree that Microsoft may include a revocation list with the licenses. Content owners may require you to upgrade the SOFTWARE on your DEVICE to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
Appendices 469 If MS, Microsoft Corporation, their affiliates and/or their designated agent make available Supplemental Components, and no other EULA terms are provided, then the terms of this EULA shall apply, except that the MS, Microsoft Corporation or affiliate entity providing the Supplemental Component(s) shall be the licensor of the Supplemental Component(s).
470 Appendices printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content.
Appendices 471 • THERE ARE NO WARRANTIES OTHER THAN THOSE THAT MAY EXPRESSLY BE PROVIDED FOR YOUR NEW VEHICLE. Adobe Contains Adobe® [Flash® Player] or [AIR®] technology by Adobe Systems Incorporated. This [Licensee Product] contains [Adobe® Flash® Player] [Adobe® AIR®] software under license from Adobe Systems Incorporated, Copyright 娀 1995-2009 Adobe Macromedia Software LLC. All rights reserved. Adobe, Flash and AIR are trademarks of Adobe Systems Incorporated.
472 Appendices General operation Voice Command Control Functions within the Windows Automotive-based system may be accomplished using only voice commands. Using voice commands while driving allows you to operate the system without removing your hands from the wheel. Prolonged Views of Screen Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.
Appendices 473 Route Safety Do not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, if you would be placed in an unsafe situation, or if you would be directed into an area that you consider unsafe. The driver is ultimately responsible for the safe operation of the vehicle and therefore, must evaluate whether it is safe to follow the suggested directions.
474 Appendices Restrictions: Except where you have been specifically licensed to do so by (Licensee), and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connecte
Appendices 475 Termination for Breach or Bankruptcy: (Licensee) and its licensors, including NAVTEQ, may terminate this Agreement if you breach any of its terms. Upon any such termination, you shall immediately cease your use of the Data and return all copies thereof to LICENSEE or NAVTEQ, as instructed.
476 Appendices Gracenote® Copyright CD and music — related data from Gracenote, Inc., copyright 娀 2000–2007 Gracenote. Gracenote Software, copyright 娀 2000–2007 Gracenote. This product and service may practice one or more of the following U.S. Patents #5,987,525; #6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459, #6,330,593, and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent: #6,304,523.
Appendices 477 respectively, reserve all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers and Gracenote Content, including all ownership rights. Under no circumstances will either Gracenote become liable for any payment to you for any information that you provide, including any copyrighted material or music file information.
478 Scheduled Maintenance GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it. Keep all receipts for completed maintenance with your vehicle. We have established regular maintenance intervals for your vehicle based upon rigorous testing.
Scheduled Maintenance 479 Convenience Many dealerships have extended evening and Saturday hours to make your service visit more convenient and they offer one stop shopping. They can perform any services that are required on your vehicle, from general maintenance to collision repairs. Note: Not all dealers have extended hours or body shops. Please contact your dealer for details.
480 Scheduled Maintenance Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed. However, a qualified expert, such as the factory-trained technicians at your dealership, should inspect discolored fluids that also show signs of overheating or foreign material contamination immediately.
Scheduled Maintenance 481 Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
482 Scheduled Maintenance 2014 Navigator (nav) Owners Guide gf, 2nd Printing, February 2014 USA (fus)
Scheduled Maintenance 483 NORMAL SCHEDULED MAINTENANCE AND LOG The following section contains the Normal Scheduled Maintenance. This schedule is presented at specific mileage (kilometer) intervals with exceptions as noted. Normal scheduled maintenance Every 7500 miles Change engine oil and filter.* (12000 km) or six Rotate tires, inspect tire wear and measure months (whichever tread depth. comes first) Inspect wheels and related components for abnormal noise, wear, looseness or drag.
484 Scheduled Maintenance Every 30000 miles (48000 km) Every 97500 miles (156000 km) Every 105000 miles (168000 km) Every 150000 miles (240000 km) Other maintenance items Replace climate-controlled (heated and cooled) seat filter (if equipped). Replace engine air filter. Replace spark plugs. Change engine coolant.* Inspect accessory drive belt(s).** Change automatic transmission fluid and filter. Consult dealer for requirements. Change front axle fluid (4WD vehicles). Change rear axle fluid.
Scheduled Maintenance Maintenance Schedule Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A COD
486 Scheduled Maintenance DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: D
Scheduled Maintenance DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER
488 Scheduled Maintenance SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For specific recommendations, see your dealership service advisor or technician.
Scheduled Maintenance 489 Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) Every 5000 miles Change engine oil and filter.* (8000 km) or six months Every 60000 miles Change transfer case fluid (4WD vehicles). (96000 km) Replace spark plugs. * Reset your oil life monitoring system after each engine oil and filter change. See the Instrument Cluster chapter.
490 Every 5000 miles (8000 km) Every 60000 miles (96000 km) Scheduled Maintenance Off-road operation Change engine oil and filter.* Inspect the wheels and related components for abnormal noise, wear, looseness or drag. Rotate tires, inspect tires for wear and measure tread depth. Change transfer case fluid (4WD vehicles). * Reset your oil life monitoring system after each engine oil and filter change. See the Instrument Cluster chapter.
Scheduled Maintenance Special Operating Condition Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE:
492 Scheduled Maintenance DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: D
Scheduled Maintenance 493 EXCEPTIONS Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water.
494 Scheduled Maintenance ENGINE COOLANT CHANGE RECORD Initial change After initial change Six years or 105000 miles (168000 km) (whichever comes first) Every three years or 45000 miles (72000 km) Engine Coolant Change Log DEALER VALIDATION: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P&A CODE: HOURS: MILEAGE: DEALER VALIDATION: RO#: DATE: P
Index 911 Assist™ ..............................381 A ABS (see Brakes) .....................187 Accessing call history/phone book during active call .............370 Accessing the help screen .......444 Accessing the music in your jukebox ......................................438 Accessing your media menu features ......................................394 Accessing your phone menu features ......................................372 Accessory delay ..........................93 Active call menu options .......
496 Index lubricant specifications ..........317 parking ....................................188 shift interlock ..........................177 trailer .......................................220 C Capacities for refilling fluids ....317 Car2U® Home Automation System .......................................143 Cargo management system ......210 CD ..............................................331 CD player ..................................329 CD voice commands .................434, 436–437 Cell phone use ...
Index DVD region coding ...................350 DVD system ...............................342 E Electronic message center .......107 Electronic stability control ......191 Emergencies, roadside jump-starting ..........................231 running out of fuel .................166 Emission control system ..........170 End user license agreement ....466 Engine ........................................316 cleaning ...................................277 coolant .....................................
498 Index high beam .................................87 replacing bulbs .......................270 turning on and off ....................87 Head restraints .........................126 Heating ..............................118, 120 Homelink wireless control system ........................................147 Hood ..........................................252 I Ignition ...............................158, 316 Illuminated visor mirror .......97–98 Information displays .................
Index Media Bluetooth menu options (adding, connecting, deleting, turning on/off) ..........................400 Message center .........................107 warning messages ...................113 Mirrors ...................................93, 96 programmable memory ............58 side view mirrors (power) .......93 signal ...................................94–95 Moon roof ....................................98 Motorcraft® parts .............275, 321 MyKey ..........................................
500 Index Receiving a text message .........374 Recommendations for attaching safety restraints for children ........................................24 Relays ................................242–243 Remote entry system illuminated entry ......................70 locking/unlocking doors ...........67 opening the trunk .....................68 replacing the batteries .............57 Roadside assistance ..................228 Roll stability control .................191 Roof rack ................................
Index Starting a flex fuel vehicle .......160 Starting your vehicle ........158, 160 jump starting ..........................231 Status bars ................................413 Steering wheel ............................81 controls ......................................82 tilting .........................................81 Supplemental Restraint System (SRS) (see airbags) ....................49 Suspension ................................201 SYNC® AppLink™ ...................389 SYNC® customer support ......
502 Index W Warning lights (see Lights) .....101 Washer fluid ..............................261 Water, Driving through .............226 Where am I? ..............................441 Windows power .........................................92 rear wiper/washer .....................86 Windshield washer fluid and wipers ..........................................85 checking and adding fluid .....261 replacing wiper blades ...........264 Wrecker towing .........................
