User manual

Impinger II – Installation & Operation Manual
16
Oven must be cool.
!
CAUTION:
CONVEYOR REMOVAL
1. Remove door from front of oven by unfastening the latching mechanisms on the left side of the door (facing
oven).
2. Pull conveyor out from oven baking chamber.
3. Re-install in reverse order.
FINGER REMOVAL
2. Grasp top finger housing, lift up from
bracket and pull forward.
3. Grasp bottom finger housing handle and
pull forward, sliding assembly out of oven.
BOTTOM FINGER ASSMBLY
4. Slide finger cover from housing. Lift out
inner Columnating Plate.
TOP FINGER ASSMBLY
5. Reassemble in reverse order. Be sure
finger assembly seats securely over rear
openings.
1. Open Door. NOTE: Door may be removed by lifting from hinges.
Finger
Cover
Columnating
Plate
Finger
Housing
Finger
Cover
Columnating
Plate
Finger
Housing