Operating Instructions

Operation 4
Operating Instructions - X EN - 01/2020
39
id: GUID-EA6A1A2F-AE1A-4567-A1CD-ED60159480D6 - version: 3 - lang: EN - srclang:
Performing a functional test of the Truck Unit
Note that the signals given by the
system are addi tional information for
the driver.
However, the driver is still
responsible to drives Safely and
keep the control over the fork lift
truck at any time!
Always perform a functional test
before starting work.
The signaling zones are pre-
configured by the manufacturer.
They must be adapted to suit the
local conditions during initial
installation. To do this, contact
your authorized service partner.
Functional test of the Truck Unit
During the functional test, the
configured signaling zones are
checked.
Two (2) people are required for the
testing.
• Switch on the industrial truck.
The Truck Unit switches on.
• Switch on the Distance Beeper
and attach the unit to your
clothing.
• Walk around the industrial truck
in a spiral shape (figure
LSG_0034) with the Distance
Beeper. During this time, the
driver checks the Truck Unit.
During the test run, no fault messages
or irregularities must appear on the
Truck Unit.
If necessary, have the signaling zones
set up again by the service partner.
DANGER
NOTICE