Operating Instructions

Operating devices and display elements 3
Operating Instructions - X EN - 01/2020
21
Distance Beeper
Switching on
You can use the "switch on / switch off" push
button to switch the Distance Beeper on and
off. To switch on the unit, push and hold the
push button until the Distance Beeper starts
up. The unit vibrates as it is switched on. A
feedback tone sounds.
To switch off the unit, push and hold the push
button until the Distance Beeper shuts down.
Rechargeable battery charge state
The LED indicates the operating status and
the charge state of the Distance Beeper.
The following operating statuses are possible:
●
LED off:
The Distance Beeper is switched off
●
LED flashes green:
The Distance Beeper is switched on. The
charge state is more than 20% of the total
capacity.
●
LED flashes red:
The Distance Beeper is switched on.
The charge state is less than 20% of the
total capacity. A periodic signal sound is
also emitted.
Signaling zone
The LEDs of the signaling zone indicate
whether the person is located in the signaling
zone of an industrial truck. The LEDs flash. In
addition, the Distance Beeper vibrates and
emits an acoustic signal. The frequency and
duration of the signal is dependent on the
configuration of the Truck Unit.
If a Static Unit is configured as a "relay sta-
tion", the Distance Beeper provides a signal
when entering this zone ahead of industrial
trucks in the zone.
LSG_0032