Operating Instructions

Operating devices and display elements 3
Operating Instructions - X EN - 01/2020
25
Static Unit
Operating status
The LED indicates the operating status of the
Static Unit.
The following operating statuses are possible:
●
LED off:
The Static Unit is not connected to the pow-
er supply.
●
LED flashes green:
The Static Unit is ready for operation.
●
LED flashes red:
The Static Unit is signaling an error.
Signaling zone
The LEDs flash red if industrial trucks with a
Truck Unit or a communication unit enter the
signaling zone of the Static Unit.
The LEDs flash red if people using a Distance
Beeper enter the signaling zone of the Static
Unit.
Acoustic signal transmitter
Depending on the configuration, the acoustic
signal transmitter sounds a signal tone as
soon as an industrial truck with a Truck Unit or
a communication unit enters the signaling
zone.
Depending on the configuration, the acoustic
signal transmitter sounds a signal tone as
soon as a person using a Distance Beeper
enters the signaling zone.
Power supply
The Static Unit is supplied with 90-264 VAC.
Electrical Outputs via potential-free
outputs
The Static Unit outputs must only be used by
KION NA certified people.
The outputs are intended for activating or
deactivating lights for additional signaling.
CAUTION
ON
LSG_0033