Operating Instructions

3 Operating devices and display elements
28
Operating Instructions - X EN - 01/2020
Operating status
The LED indicates the operating status of the
Zone Marker.
The following operating statuses are possible:
●
LED off:
The Zone Marker is not connected to the
power supply.
●
LED flashes green:
The Zone Marker is ready for operation.
●
LED lights up green or red or flashes red:
The Zone Marker is signalling an error.
Signaling zones
The LEDs flash if industrial trucks with a Truck
Unitor a Truck Unit Small are present in the
signaling zone of the Zone Marker.
The following operating statuses are possible:
●
LEDs flash orange:
Industrial truck in the extended area of the
Zone Marker.
●
LEDs flash red:
Industrial truck in the vicinity of the Zone
Marker.
Electrical Outputs via potential-free
outputs
The Zone marker outputs must only be used
by KION NA certified people. The outputs
are intended for activating or deactivating
KION light-products or third party low-
voltage optical signaling-products like LEDs
or Flashlights that work with less than 240V.
The outputs may only be used to activate or
deactivate a relay to which the light-product
is connected to. The installation and wiring
must only be executed by certified personal,
that are trained and certified to work with
electrical current. The safety-standard while
working with electrical voltage must be
complied with.
The usage of the outputs is part of the KION
NA service-technician training in the
framework of the Linde Operator
Assistance System and depends on the
respective model.
NOTICE
ON
S1
S2