Operating Instructions

4 Operation
32
Operating Instructions - X EN - 01/2020
Installation
id: id: GUID-65900DDA- D562-41FE-8215-640261E05F30 - version: 2 - lang: EN - srclang:
Attaching the Distance Beeper
Switch on the Distance Beeper. To do this,
push and hold the push button (2) for one
second.
The Distance Beeper starts. A signal tone is
heard, the LEDs of the signaling zones light up
and the device vibrates briefly.
Check the charge state of the battery.
The LED must flash green. If the LED flashes
red, the Distance Beeper needs charging.
Attach the Distance Beeper to the outside
ofyour workwear using the clip (1).
Incorrect attachment can lead to incorrect
radio communications! Refer to Section 4
Pre-Shift Checks for details and
safeguarding.
1. Wear the Distance Beeper high
on your body
2. Wear the Distance Beeper such
that it is unobstructed for all
directions around the body
WARNING