Operating Instructions

4 Operation
36
Operating Instructions - X EN - 01/2020
id: GUID-8ABB286F-CCBD-42D8-8CF3-BE59244C0231 - version: 3 - lang: EN - srclang:
Checking the charge state of the
Distance Beeper
The Distance Beeper must be charged before
use.
1. Switch on the Distance Beeper.
2. A short signal tone must be audible and the
device must vibrate.
3. LED (1) continually flashes in green.
4. If the LED flashes red, charge the Distance
Beeper.
Checking the function of the
Distance Beeper
Before the start of work, the Distance
Beeper must be checked to ensure that it
functions correctly.
Switch on the Distance Beeper and attach the
unit to your clothing.
Switch on an industrial truck equipped with the
Truck Unit. The Truck Unit switches on.
With the Distance Beeper attached to your
clothing, step into the expanded signaling area
of the industrial truck.
Circle the truck (Figure LSG_0061) while remaining
within this signaling area.
The LEDs for the signaling zone flash on the
Distance Beeper. A signal tone must sound and
the device must vibrate.
The Distance Beeper is now ready to use.
Alternatively, the pre-shift checks can be per-
formed in conjunction with a Static Unit. The
Static Unit must be specially configured for
this purpose. Contact your authorized service
partner.
WARNING
WARNING
NOTICE