Operating Instructions

Operation 4
Operating Instructions - X EN - 01/2020
37
id: GUID-AD66DD7D-A851-488D-B8F9-AACB75F051BD - version: 3 - lang: EN - srclang:
Charging the Distance Beeper
Risk of accident due to discharged
battery! Charge the Distance
Beeper after use
Prior to initial commissioning, the
Distance Beeper must be fully
charged once. If the Distance
Beeper is removed from the
charging station too early, the LED
flashes red even when the charge
capacity is over 90%.
How to charge the Distance
Beeper:
• Connect the power supply unit to
the power supply. The LED on
the power supply unit lights up
green.
• Connect the charging station to
the power supply unit via the
USB cable.
The status display lights up red. The
charging station is ready for
operation.
• Place the Distance Beeper (2)
face down on the charging
station.
The Distance Beeper emits a signal
tone and the LED (3) on the back of
the unit flashes red. The charging
display (1) on the charging station
lights up blue. The charging process
starts.
When the charging process is
complete, the LED (3) lights up red
permanently. The LED on the
charging station expires.
WARNING
NOTICE
2
3
1