Operating Instructions

Introduction 1
Operating Instructions - X EN - 01/2020
7
5
th
SENSOR
Additional sensor for signaling that
another industrial truck with Truck Unit
is in proximity
TRUCK UNIT
SMALL
Truck Unit Small to interact with fixed
components and between trucks.
Detection of mobile components is not
possible.
Fixed Components
STATIC UNIT
For signals at points that are difficult to
overview
ZONE MARKER
For setting up zones in which Truck Units
give optical signals and optionally can give
a signal to the truck interface, so that for
ex- ample the truck reduces the speed
Mobile Components
DISTANCE
BEEPER
Gives signal if it is inside the detection
zone of Truck Units or optionally Static
Units or Zo- ne Markers
Inductive
Charging
Inductive charging station for the Distance
Beeper
User groups
During the installation, setup and usage, different
user groups are needed to ensure the correct
usage of the system and the correct behavior of the
people. The following definition of the user groups
will be used throughout this manual
USER
The user of the system is either the driver
of the industrial vehicle or the pedestrian
wearing the signaling device
SUPER USER
The Super User is trained by the LOAS
Expert or EHS Officer and is thereby able to
instruct other users of LOAS
LOAS EXPERT
(TECHNICIAN)
The Expert is able to install, configure and
maintain the system. The person is trained
and certified by KION NA.
EHS OFFICER
The Environment, Health and Safety
Officer is with the company of the users
and is doing the risk assessment during the
usage of LOAS
Risk Assessment
Risk assessment has to be performed by your
Environmental Health and Safety officer. In
case you do not have an EHS manager, please
get in contact with KION NA or your local dealer
for further assistance.
Although the Linde Operator Assistance System is
an assistance system and the users are still in full
responsibility, to assess any potential impact on the
company, people, trucks and infrastructure, it is in
the company’s responsibility to do a risk
assessment to utilize the Linde Operator
Assistance System.
WARNING