Operating Instructions

1 Introduction
8
Operating Instructions - X EN - 01/2020
Installation report
The installation report is an agreement between the
operating company and the service partner (e.g. KION
NORTH AMERICA or qualified resellers).
The report contains all framework conditions plus
details of the configuration of the system and any
adaptations made to the work environment.
The installation report is distributed as a form along
with the technical documents. Once commissioning is
complete, the Linde Operator Assistance System is
fully documented.
User report and training
To support users to be aware of the system as an
assistance system it is mandatory to:
1. Initially train the users about functionality of
the system
2. Training of at least one super user is man-
datory. This can be the EHS or logistics
manager. This super user has to be able to
train users.
3. Training has to be repeated on an annual basis
and a test has to be passed by each user
(truck driver and pedestrians at the workplace)
id: GUID-FC976068-009E-4C7A-B0D6-E18388B2DFBB - version: 1 - lang: EN - srclang:
Intended use
The components of the Linde Operator Assis-
tance System has to be used only for their in-
tended purpose. The safety information has to
be observed.
Restricted approval for use
Linde Operator Assistance System is
approved for use in the United States of
America, Canada and Mexico. Use in
other countries is not authorized by
Linde Material Handling nor KION
NORTH AMERICA.
General
The Linde Operator Assistance System is a
wireless assistance system for informing
pedestrians and forklift truck drivers in
defined areas in industrial environments.
The truck and mobile components of LOAS
can generally be used inside and outside.
The use of devices mounted on outdoor
structures, e.g. Static Units mounted on
the outside of a building or any fixed
outdoor infrastructure is prohibited
If radio frequency interference at the place of
use results in adjustments to suit local conditions, re-
registration and approval may be necessary.
Usage
The components of the Linde Operator Assistance
System are used in the working environment of
industrial trucks.
The system wirelessly measures the distance between
the component mounted on the industrial truck,
components at fixed positions in the working area and
the mobile components that individuals carry on their
person.
It is prohibited to use the assistance system as a
guide when visibility is poor.
Installation
The installation of LOAS has be fulfilled by a qualified
and authorized service technician. After the installation,
the system has to be configured and tested for
functionality. This test has to be documented and signed
by the technician and the EHS Manager of your
company.
It is prohibited to install LOAS with a non-
authorized service technician.
The components on the industrial truck are
WARNING
NOTICE
WARNING
WARNING